MOWER MANUFACTURERS AND MODELS
The Old Lawnmower Club
In compiling this Directory the question has been what to include and what to leave out. Basically the Directory set out to include mowers of all nationalities likely to be found in the UK up to 1960, and UK-built mowers only after that date; thus avoiding the booklet being bogged down with latter-day Japanese and American products. We have taken as a yardstick machines which were primarily designed as lawn or rough grass mowers, thus excluding agricultural mowing machines and horticultural machines to which mower attachments could be fitted (eg I have excluded the 1950s Landmaster “Gamecock” but included the “Atcoscythe” from the same period).
As regards selling prices, We have left these in their original form using either pounds, shillings, and pence, or guineas. Converting them to decimals would in any case be meaningless, particularly when dealing with mowers made pre-World War 2. We have found that with most antique machinery the best way to establish comparative selling prices is to think in terms of current wages. For example £4.0.0d per week in 1939 was a good wage for the working man or woman (agricultural workers with their tied cottages often earning much less). Thus, in 1939 a high-quality motor mower such as the JP “Super 16-in” retailing at 39 gns (£40.19.0d) was the equivalent of ten week's wages or one-third the price of a small family car, taking it far outside the pocket of Mr. “Average”. A Greens “Popular Two” manual roller machine from the same year, selling at £3.7.6d, would, however, have been just affordable, especially if purchased on an instalment plan. Further back into the century wages were, of course, even less; a trained school teacher in 1900 would have been lucky to earn £2.0.0d a week and an agricultural worker 19/-d. However, for those readers who wish to make the conversion to decimal currency the table below may be of use.
|“Old” shillings and pence||Decimal new pence|
|1/-d (one shilling)||5p|
|2/-d (two shillings or florin)||10p|
|2/6d (two and sixpence or half a crown)||12.5p|
|10/-d (ten shillings)||50p|
|£1 (20/-d) (one pound)||100p|
|21/-d (one guinea)||105p|
£5 (100/-d) (five pounds)
For those young enough not to remember, and old enough to have forgotten, there were 20 shillings to the pound and twelve pence to the shilling. Thus a 1901 18 inch “Swift” mower at 38/-d = £1.18.0d = 190p in decimal currency.
Nothing has been said in the text about current values, as it is very difficult to assess these in such a comparatively new field of collecting. The answer to the question “what is a mower worth?” is quite simply “what someone is prepared to pay for it”, and this may vary from location to location, depending how the mower is sold and who the bidders are. Quite often a collectable mower may be had for a few pounds from someone turning out their grandfather's shed - whereas at a large farm machinery auction with a number of collectors present the same machine will fetch three figures. Neither is there a correlation between the mower’s original selling price and its current value, for example a late 19th century American sidewheel mower originally priced at a pound or two can now fetch more than many later motor mowers which originally cost their owners three month's wages. It's a funny old world.
Similarly, we have left mower cutting widths in the inches in which the majority of these machines were marketed. For those who wish to do the conversion one inch equals 2.54 centimetres. Thus a 12 inch mower has a width of 30.48 centimetres, and a 40 inch machine a width of 101.6 centimetres or 1.016 metres. Most mowers were offered in even sizes varying by 2 inches (eg 8, 10, 12, 14, 16 inches etc.). Some, however, were offered in odd sizes (eg 11, 13, 15, 17 inches etc.).
NOTES ON USING THE DIRECTORY
It is important to recognise that this list is not definitive, nor was it meant to be. Indeed, it was written with the expectation that Club members and others would submit inclusions and alterations, so that at some time in the future the list could become as comprehensive a record as Club members and other enthusiasts allow it to be.
Any additions and amendments can be submitted to the editor directly or through the Old Lawnmower Club.
Readers should be aware of the following notes when using the directory:
- All entries are in alphabetical order.
- Entries listed in quotation marks (““) are model or brand names.
- Entries without quotation marks refer to companies or individuals.
- Words in bold type indicate that an entry exists for this word elsewhere in the directory.
- Each copy of the directory supplied to readers is printed direct from the original computer file. This means that the most up to date version and information is produced. The date at the base of each page indicates the day of printing. Earlier dates (on other directories) indicate a previous version.
BADGED MOWERS :
See Catalogue mowers.
BANK CUTTER :
A variant of several sidewheel machines (particularly Ransomes "Lion", "Ace", "Cub" and "Leo") equipped with an extra long handle, usually of some 70 inches or so, coupling to an additional set of studs on the chassis of the mower. This enabled the user to cut grass on steep banks and slopes. Such mowers were offered from the late-19th century onwards.
CATALOGUE MOWER :
A mower usually made by a large manufacturer but bearing the name of the retailer. This practice was started in the late 19th century by American manufacturers who provided this service to retailers who sold a specified number of their mowers. (See Suttons, Selfridges, etc.). These are also sometimes referred to as "Badged", "Branded", or "Private Label" mowers.
CHEVRON BLADES :
A cutting cylinder with the blades set in a shallow 'V' shape, designed to throw the cuttings into the centre of the grass box and to prevent the blade from "walking" to one side or the other and ruining the bearings. This was a feature on many Ransomes pre-1930s mowers, and on later Dennis mowers such as the "Premier". Also known as "herringbone" blades (USA).
CONVERSION UNITS :
Engines which were made to be bolted onto manual mowers to enable these to be used as powered mowers. These could be either petrol-driven (see "Auto-Mower") or electric. See also "Pusher Units".
CUTTING CYLINDER :
A feature of all mowers until the introduction of the rotary mower, this consists of a number of blades moving in the vertical plane around a central axis and acting against a fixed blade forming an extension to the sole plate.
DELIVERY PLATE :
A curved deflector mounted adjacent to the cutting cylinder to direct the grass cuttings into the grass box. These, along with the grass box, were often offered as optional extras. Thus, many sidewheel mowers do not have either, as they were not purchased in the first place.
DRAW ROPE :
Early manual mowers, unless they were quite small, required two-man operation, the man in front pulling the mower by means of a draw rope fitted to a bar in front of the grass box (See "Silens Messor").
A machine for trimming lawn edges. This could either have separate blades as in the Ransomes edger, or a disc coulter. This could also be part of a Trimmer mower, see below.
FINE TURF MOWER :
A mower specifically designed for specialist areas such as bowling greens, golf courses etc. (See "Certes", "Overgreen" etc.)
FINGER BAR MOWERS :
See Reciprocating Knife mowers.
FLAIL MOWER :
A mower using banks of flails instead of blades. An example of this type of mower was made by the Japanese firm of Iseki who were importing this type of mower into the UK in the 1980s (also Mott Hammer Knife).
FRONT RUNNER :
An optional extra manufactured for sidewheel mowers from around 1900 to enable them to cut closer to lawn edges. These were useful on mowers such as the Ransomes "Lion".
HIGH WHEEL MOWER :
A name given to some sidewheel mowers made specifically for cutting longer grass (eg Ransomes "Ripper"). Also known in the United States as "Hi-Cut" mowers.
HOVER MOWER :
A rotary mower in which the machine floats on a cushion of air created by the down-draft from the blades. First introduced in the early 1960s (see Flymo).
HYBRID MOWER :
This is a term I have unashamedly made up myself for those mowers (mostly American) which do not fall neatly into the roller or sidewheel categories, because they used inside-frame land wheels in place of the usual roller. The 1890s "Charter Oak" is an example of these.
MULCHER MOWER :
A rotary mower in which the grass cuttings are converted into a fine mulch within the machine by means of a specially shaped blade.
PONY MOWER :
A mower designed to be pulled by a small horse or pony which usually wore boots to protect the turf. Superseded by powered mowers in the early 20th century. In many instances shafts were fitted although some mowers had a whippletree or single shaft.
PURCHASE TAX :
A supplement to the standard price equivalent to the modern VAT, introduced by successive UK governments post-1945. This is abbreviated in the text to 'PT'.
PUSHER UNITS :
Petrol engines with wheels and seats attached which could be shackled to the rear of the larger manual mowers such as the bigger "Automatons", thus converting them into powered mowers. (See "Mower Pusher Co." and Rendle).
RECIPROCATING KNIFE MOWER :
A mower in which the conventional cutting cylinder is replaced by a cutter bar with blades moving in the horizontal plane as in the old agricultural harvesting mowers. The cutter bar was sometimes interchangeable with a cutting cylinder. Reciprocating-knife mowers were usually made for smallholdings and orchards rather than for lawns. See "Allen Scythe", "Autoscythe", etc.). Also known as Finger Bar, and Sickle Bar mowers.
REEL CUTTER :
A rotary cutting head in which the blades are replaced by nylon gut (monofilament) extending outwards from a central reel as in a garden "strimmer", also known as "string trimmers" (USA).
REEL MOWER :
An American term for a cylinder mower (usually a sidewheel machine).
RIDE-ON MOWER :
A mower designed to be ridden on like a farm tractor (See "Frigate", "Lawnrider" etc.).
ROLLER MOWER :
A mower, either powered or manual, with the blades driven from a metal roller to which the power is applied. The drive to the blades can be either by chain or gears. The very earliest mowers were of this type (See "Automaton", "Panther" etc.).
ROTARY MOWER :
A mower in which the conventional cutting cylinder is replaced by blades rotating in the horizontal plane. This type of mower was pioneered in the UK by Rotoscythe in the 1930s. There is also an American patent in 1929 by Wm. E. Beazley.
SCRAPER PLATE :
A narrow plate or bar fixed between the handles or side-frames of a roller mower to scrape mud and leaves off the roller. These were often used as a mounting for manufacturer's or retailer's nameplates (eg Ransomes, Greens etc).
SHINGLER (Barraclough) :
A device marketed by H. Barraclough of Halifax (early 20th century) for Greens mowers which replaced the front roller and allegedly gave a better finish to a cut lawn. The "Shingler" consisted of helical brushes around a cylindrical roller, not unlike the brushes of a Hoover vacuum cleaner.
SIDEWHEEL MOWER :
A mower, usually manual but occasionally powered, with the blades positioned between two outside-frame wheels, and driven either directly or through gearing; thus dispensing with the heavy roller. These were first introduced in the second half of the 19th century. (See "Pennsylvania", Follows & Bate "Climax" etc). Where no other information is given in the Directory, the reader may assume that the mower is a manual one.
SOLE PLATE :
A horizontal plate on the underside of a cylinder mower to which the stationary bottom blade is fixed (also known as the cast back, or blade back (USA).
TRAILING SEAT :
A seat with wheels or roller shackled to the rear of a mower to enable the operator to control the machine whilst being pulled along by it. Usually offered as an optional extra to larger mowers such as the Dennis "Z".
A machine resembling half a sidewheel or reel mower and used for trimming lawn edges (USA).
American term for cutting cylinder (late 19th/early 20th century) i.e. that part of the mower to which the blades are attached.
German makers of the "Perfection" ("Perfektion") sidewheel mower c1908.
Late 19th century makers of a lawn edger and "automatic shears" consisting of ratchet-driven shears attached to a small roller, the machine being pushed along by a pole handle. Registered office was at 13 Charterhouse Street, London. The price c1890 was 22/-d.
American manufacturers - one product of the company had a cylinder with two very thin blades which cut with a scythe action, as the "Flexa", so dispensing with the fixed bottom blade. The manufacturers may have been the Autosickle Co. of South Natick, Massachusetts, USA.
ALLEN (John) & SONS :
Oxford makers of the Allen Scythe reciprocating knife mower from 1935. The firm acquired the Mayfield company in 1960 and continued to produce machines under the Allen-Mayfield and Allen Power Equipment names.
ALLEN POWER EQUIPMENT :
See Allen (John) & Sons.
A Stamford company who used "Reliant" water-cooled car engines for their larger machines in the 1950s. Producers of a petrol-engined rear-roller drive gang mower in 1965.
AMERICAN DIE & TOOL CO. :
American manufacturers from Reading, Pennsylvania, USA. Makers of the 1906 "Acme" sidewheel mower.
AMERICAN LAWN MOWER CO. (GREAT STATES CORPORATION) :
A company based at Shelbyville, Indiana, USA, and still extant. The firm was founded at the end of the 19th century (1892) by four partners in Richmond, Indiana, at that time one of the centres of the American lawn mower industry. The firm moved to Muncie, Ind. in 1902. In 1936 the company acquired the Great States Company which had established itself in Shelbyville in 1923, making their first mower in 1925. The ALM Co. itself moved to Shelbyville in 1984. The firm specialises in "reel mowers" which is the US term for cylinder (usually sidewheel) machines.
AMI LAWNMOWER CO. LTD. :
A company based at 27, Whitcomb Street, London. One-time makers of "Ladybird" electric conversion units.
ANDERSON (F.S.) :
An American firm from Richmond, Indiana, USA, and makers of a variety of mowers including the "Columbia".
ANGLO-AMERICAN HARDWARE CO. :
Early 20th century agents for American-made mowers such as the Philadelphia "Graham". Louis Ruys of Antwerp is known to have been one of their retailers c1920.
See British Anzani
ARUN MAYFIELD :
ARUNDEL, COULTHARD & CO. LTD. :
A Preston firm, manufacturers of the "Presto" & "Rollmo" mowers, this company began producing mowers in the mid-1930s making both manual and powered machines. Acquired by the Qualcast Group in the 1950s the company was then closed down.
Originally C.H. Pugh's Atlas Chain Company, this firm started making mowers in 1921 and were soon the market leaders for the suburban market with their "Standard" mower. The "Standard" was soon followed by a series of lightweight mowers which sold in large numbers both before and after World War 2. ATCO became part of the Qualcast Group in 1962 and part of Birmid-Qualcast in 1967. In 1969 they merged with Suffolk Iron Foundries to become Suffolk Lawn Mowers whereupon ATCO production moved to Stowmarket. Birmid-Qualcast were acquired by Blue Circle Industries in 1988, and in 1992 there was a further name change when the name Atco-Qualcast was adopted.
ATLAS CHAIN COMPANY :
AUSTRAL VILLIERS :
An Australian company from Armadale, Victoria. In the 1950s they were producing a Villiers-powered roller mower similar to the lightweight ATCO machines of the same period and also made a kick-start rotary mower.
AUTO-MOWER ENGINEERING CO. LTD. (The) :
A company started by G. Grist in the early 1920s making high quality mowers, as well as a variety of other machinery and components, based at Norton St. Philip, Nr. Bath. The mower manufacturing rights were sold to Ransomes, Sims and Jefferies in 1946 and the remainder of the business was sold to T.H. White Ltd. of Devizes in 1968.
AUTOSICKLE CO. :
An American company from South Natick, Massachusetts, USA. Possible makers of the Allcut machines. A bents cutter c1910-20 from this company is owned by the Hall & Duck Trust.
B & J :
See Blair Mfg. Co.
BALLACH (A) & SONS :
Late 19th/early 20th century manufacturers and retailers from Manderston Street, Leith. Makers(?) of "Caledonia" and "Waverley" machines.
BARFORD & PERKINS :
Late 19th century makers. In the 1890s they produced the "Beatrice" sidewheel machine and the "New Clipper" roller mower. In 1902 they pioneered the Wansbrough Patent method of altering the height of cut, fitting it to their "Godiva" range of mowers. The company was based at Queen St. Peterborough and became Agricultural & General Engineers (AGE) in 1920. See also Nene Engineering.
BARFORD (AGRICULTURAL) LTD :
A Belton (Grantham) company, makers of the "Rotomo" in the early 1960s. This firm was primarily makers of horticultural machinery such as the "Atom" garden tractor.
BARNARD BISHOP & BARNARD :
In 1863 this firm patented a mower utilising friction drive by rubber-tyred wheels. This was not successful and by 1866 the company had returned to a Budding-type gear drive. However, in 1877 this company were still offering their rubber-tyred ("Noiseless") machine alongside a geared drive machine (an "extra-strong" version being available for pony haulage); and "Cottage" mowers with 6- 10 inch cut.
BARRUS (E.P.) LTD :
An Acton firm which marketed the Canadian-built "Lawn-Boy" in the early 1960s and later became the UK distributors for Victa.
BEAZLEY, William E :
Patentee from St. Petersburg, Florida, USA of a rotary blade for lawnmowers with fan to provide suction (British patent 336, 079/1930 and US patent 6/15/1929). See Rotoscythe.
BENTALL E.H. :
This Essex (Heybridge) manufacturer of farm machinery and motor cars also made the "Universal" mower in the late 19th century.
BENZ CO. :
A Stuttgart (Germany) firm, pioneers of the motor car, experimented with a petrol-driven lawnmower c1897. There is no evidence, however, that this was put into production on any scale. See also Coldwell and Grimsley.
Makers of a professional rotary motor scythe in the early 1960s, easily adapted to deal with bracken and saplings. This machine sold in 1964 for £49.10.0d (pusher) and £75 (self-propelled).
BINCH Wallis :
Manufacturer of manual roller and sidewheel mowers in the 1930s. The company was based at New Basford in Nottingham, and products included the Binch "Model B" sidewheel mower and the "Grasshopper" roller mower. Also referred to as "British Binch".
BLACK & DECKER :
A large tool-making company which started making small mains electric rotary mowers in the 1960s, using hardware shops and garden centres as retail outlets.
BLAIR MFG. CO :
An American firm from Springfield, Massachusetts, USA, (c1884) previously trading under the names of B & J, and Blair & Fiske (1879-1884) makers of the "Easy" and "Hercules" mowers. In 1955 the Blair Mfg. Co. became Blair Co.
Detroit (USA) manufacturers of power mowers (1950s).
U.S.A. manufacturers of ride-on mowers imported into the UK in the late 1950s, the UK agents being the Howard Rotavator Co.
BOOKWALTER (J.W.) :
Late 19th century manufacturers from Springfield, Ohio, USA. Makers of the "Favorite" sidewheel mower.
BOULTON & PAUL :
This well-known Norwich engineering firm also made lawnmowers, and in 1877 was advertising a range of roller mowers which included the "Eclipse" and the "Guinea".
BOYD James :
A Lewisham manufacturer of a manual roller mower advertised in the Great Exhibition Catalogue 1862. This was advertised as a "patent brush mower, self cleaning, self sharpening" and with a "shaft roller" and "tubular scythe handles". Boyd had originally designed a lighter and improved version of the Budding mower which was manufactured by Samuelson c1855.
BRAUN J. :
A Philadelphia, USA company manufacturing mowers c.1877. In 1889 the Supplee Hardware Co. were sales agents for this firm.
BRECKNELL (H. & Sons) :
A company operating from Tangent Works, Keynsham, Bristol in the 1930s. Makers of the "Keynsham" roller motor mower.
BRIELMAYER Josef :
A Friedrichshafen (Germany) manufacturer (ca. 1955) of a powered hand-held motor scythe with a star-shaped rotating cutting head. Two models were available, the F300 and the F600. The machine was slung across the operator's body by means of a strap and used very much in the same way as a modern strimmer. A variety of attachments were available.
German manufacturers of sidewheel machines.
BRITISH ANZANI ENGINEERING CO. LTD :
A long-established engineering firm making a range of mowers in the 1950/60s. Products of this company include the "Easimow" and the "Lawnrider" but other more conventional mowers were also manufactured. The firm was based at Hampton Hill, Middlesex, and later at Maidstone. The Anzani company had three major independent firms, Italian Anzani, French Anzani, and British Anzani, all of which had pioneered the use of small petrol engines for the aircraft and marine industries during both World Wars. By the early 1970s, however, British Anzani had been bought by scrap metal and property speculators.
BROWN (J.B.) & CO. :
A London company with registered offices at Upper Thames Street and Cannon Street - makers of the "BB" lawn mower in the 1860s.
BUDDING & FERRABEE :
BUDDING Edwin Beard :
Pattern maker and inventor (1795-1846) who designed the world's first lawn mower in 1830. His patent 5990 (1830) describes the machine as "a new combination and application of machinery for the purpose of cropping or shearing the vegetable surface of lawns, grass plats, and pleasure grounds, constituting a machine which may be used with advantage instead of a scythe." He then went into partnership with John Ferrabee. From 1832 Ransomes of Ipswich obtained a licence to produce and sell Budding mowers also, thereby establishing a network for the sale of Budding & Ferrabee machines. By 1840 over 1,000 machines had been sold.
BURGESS W.J. & C.T. :
A Brentwood (Essex) firm of agricultural implement makers (formerly Burgess & Key) established in 1855 to make McCormick reapers. In 1910 they produced a water-cooled motor mower with ribbed land wheels. This machine was sold in 24 and 30 inch widths, and the selling price of just under £50 made it highly competitive. After World War 1 they pioneered the use of motor-conversion kits for the larger manual and pony mowers, but had gone out of business by the end of the 1930s. Also manufacturers of the "Bee" powered mower c1922.
C & C MFG. CO. :
See Chadborn & Coldwell.
C & K LTD. :
Makers or retailers of a 17 inch sidewheel mower marked "Diamond Ball Bearing"; probably an American import. Colour is maroon with silver wheels. More information needed.
CALEDONIA [Manufacturer] :
A firm known to have made lawn mowers. Can any reader supply further details?
CAMION FRERES :
Ironmongers; importers and manufacturers of lawnmowers. Based at Vivier-au-Court in the Ardennes (France) c1930.
CANNON & STOKES :
The company that bought up J.P. in 1969.
CARR & HOBSON :
Late 19th century manufacturers based at 47, Cliff Street, New York, makers of the "Knickerbocker" and "National" mowers.
CARRICK AND RITCHIE LTD :
Edinburgh manufacturers and retailers.
CHADBORN & COLDWELL :
CHAMPION MFG. CO. (formerly The Champion Roller Skate & Wagon Co.) :
Late 19th century manufacturers from Richmond, Indiana, USA, makers of the "Champion" and "Rowlett's Champion" sidewheel mowers.
CHAMPION ROLLER SKATE & WAGON CO. :
See Champion Mfg. Co.
CIVIL SERVICE SUPPLY ASSOCIATION (The) :
(Abbrev. CSSA), a popular firm of wholesalers based in The Strand, London, who sold mowers bearing their name but made by Follows & Bate.
CLARK (W) :
A company based at 232 Oxford Street, London, makers of horse and garden clippers, and sheep shears. In the 1870s and 80s they also produced a range of long-handled reciprocating knife machines with rear rollers and collecting trays for use on slopes, rough grass, and standing crops. The "Astor" grass clipper made by Flexa in the 1950s was a modern version of these Clark's machines.
CLIFTON, Richard :
Owner of ex-J.P. stock in 1974. His plans to restart production on a limited basis, however, failed to materialise.
CLIPPER LAWN MOWER CO. :
A late 19th century American firm with works in Norristown, Pa. and Dixon, Illinois, USA. Makers of the "Clipper" reciprocating-knife mower.
COIT, Samuel :
Inventor of Hartford, Conn. USA. Patentee of an improved mowing machine, May 1869.
COLDWELL LAWN MOWER CO. (also CHADBORN & COLDWELL). :
Manufacturers from Newburgh, New York, USA 1891-1950. Makers of an American petrol-engined lawn mower to the original design by the Englishman W. J. Stephenson-Peach, c1906. They were also makers of "Excelsior" and "New Excelsior" machines. This firm also made (ca. 1900) a steam-driven mower weighing 1.3 tons with a vertical boiler and 40 inch cutting width. On the smaller "Excelsior" mowers the words "C & C Mfg. Co., Newburgh, N.Y." appear on the handle bow, and on the larger mowers this was cast into a square plate mounted on the handles.
COLLINGS & WALLIS :
Birmingham ironmongers, and agents for the Canadian-built "Woodyatt" sidewheel mower, c1899 (See Taylor-Forbes).
COOPER (William) LTD. :
COOPER MFG. CO. :
American manufacturers of the Cooper Putting Green mower (c.1930), this company was based at Marshalltown, Iowa, USA.
COTTISS (William) & SONS LTD. :
Ironmongers from Epping in Essex and makers, under licence, of the "Archimedean" mower, late 19th/ early 20th century. Also iron and brass founders and cycle agents.
COURSE & CARNE :
Bedford makers of a motorised cylinder mower (1920/30s) characterised by its bottle-shaped petrol tank mounted vertically on the left-hand handle. One such machine, owned by an Old Lawnmower Club member was exhibited at the 2003 annual rally of the Club.
CRANSTON, W.M. :
Agents for the Woods Patent Mowing Machine referred to in the Great Exhibition Catalogue of 1862. The address given was 58, King William Street, London Bridge.
CRESCENT BRASS & IRON CO. :
Late 19th century manufacturers from Detroit, Mich. (U.S.A.), makers of the "Junior" toy lawnmower.
CROFT ENGINEERING :
Australian manufacturers producing mowers for the home market.
CROWLEY (John) & Co. :
Late 19th century Sheffield manufacturers of wide range of manual and pony mowers, including the "Invincible" mower.
CULVER G.A. :
An Iowa, USA inventor and, in 1909, patentee of a lawn mower in which the blades of the cutting cylinder were made in the form of arcs of an ellipse, the bottom blade being shaped to that of the main blades to give a shearing cut. As far as is known, no mower was ever mass-produced using this principle.
CUMBERLAND MOWERS LTD :
Makers of a Villiers-powered roller mower c1938.
CURTIS CULTIVATOR CO. (The) :
A Matlock firm; makers of the "Star" sidewheel mower c1932, a 10 inch example of which is in the mower museum at Trerice, Cornwall.
CYLINDER COMPONENTS LTD :
A company trading under the name "Cyclo" with a registered office at Lifford Lane, Kings Norton, Birmingham; manufacturers of the "Jobber" reciprocating knife mower of the 1960s.
D.B. LAWNMOWERS :
See Dronsfield Brothers Ltd.
DAHLMAN Karl :
Pioneer of the hover mower (see Flymo).
DAP LTD. :
Dudley, Worcestershire. Manufacturers of the "Vantage" wheeled mower c1945.
DAWES, William :
Leeds inventor, co-patentee with Henry Holt of improvements to lawn edgers, Dec.1874, June 1875.
DENNIS BROTHERS :
A Guildford company which started making mowers in 1921 after having made their name in the manufacturing of commercial vehicles. Their initial design based on aluminium castings was not a success but the company re-appeared in 1923 with a new design which formed the basis of their mowers until the 1960s. These heavy mowers were usually sold with 24 or 30 inch cutting widths, and were best used with a trailing seat. Their speciality was to produce machines for large flat surfaces such as cricket pitches. Early machines had rectangular fuel tanks but these were later replaced by cylindrical ones. In the post-1945 Z Type machines the single flywheel was replaced by twin flywheels but there is a marked similarity between this firm's pre-war designs and the later models which continued well into the 1960s. The company finally ceased production in 1970 but their machines continued to be made by the Dennis Godstone Engineering Co. until 1981.
DENNIS GODSTONE ENGINEERING CO. :
See Dennis Brothers.
DERRY & TOMS :
A London department store (latterly Barkers) well-known for its roof garden. At least one Club member has an American-made sidewheel mower c1930 with the name of this firm cast into the wheel hubs. Like similar mowers marked Selfridges and Gamages, it is assumed that this was a catalogue mower.
DERWENT IRON FOUNDRY :
DILLE & MCGUIRE (later DILLE & ANDERSON) :
Late 19th century lawn mower manufacturers from Richmond, Indiana, USA, makers of the "Richmond Star" and "Yale" mowers. (See also F.S. Anderson).
Catalogue mowers made in the 1930s/40s. One example is an all-steel Webb-type manual roller mower (probably made by Follows & Bate as it seems identical with their "Falcon").
DRONSFIELD BROTHERS LTD :
Atlas Works, Oldham. Manufacturers of the "Snipe" sidewheel mower, c1938.
DRUMMOND BROS. LTD. :
A Guildford company, well known for their lathes, making a range of powered and manual mowers in the 1920s and 30s, notably the "Willing Worker" roller mower. This company originated with an artist and model maker, Arthur Drummond, who set out to produce a good model-making lathe. The firm was based at Rydes Hill, Guildford, and commenced operations in 1896 but did not turn to mower manufacturing until 1924 when manual roller machines were made in three sizes, 10, 12, & 14 inch (the latter being the rarest). Motor mowers were made for 3 years from 1924 ( only 250 being made) but manual mowers continued until the late 1930s. Lathes continued to be made. By the 1960s the firm was the Drummond Division of Staveley Tools, but ceased operations in 1981.
DS & Co. :
An Australian-made sidewheel mower, probably of American design (1930s/40s).
ECLIPSE LAWN MOWER CO. (THE) :
Early 20th century manufacturers based at Prophetstown, Illinois, USA, makers of "The Lady" and other sidewheel machines. Taken over by Hahn Inc. in 1960. (See C.J. Thompson "The Eclipse Lawn Mower Co." FHEC magazine Jan/Feb. 1999).
EDWARDS Samuel :
Salford, Lancs, patentee of the "Invincible" and "Victor" mowers manufactured by Crowley & Co. Patentee of improvements to lawnmowers March/June 1873.
EMERSON, TALCOTT, & Co. :
Manufacturers of Rockford, Illinois (USA), makers of Standard lawnmowers (late 19th century).
EMERY (A.J.) AND SONS :
Halesowen (Birmingham) engineers and manufacturers of domestic lawnmowers from 1938 to 1955, the "Clipper" being their best known model. None of their models was made in large numbers.
ENFIELD CYCLE CO. (The) :
Manufacturers of mowers during the 1930s, the best known being the "Royal Enfield" powered roller mower which sold for
ENTERPRISE MFG. CO. :
A late 19th century American firm from Philadelphia, Pa. makers of the "Enterprise" mower; a company best known for its range of domestic mincing machines.
FAGAN, W.H. (Abbrev. W.H.F.) :
Early 20th century London importers of American mowers which had "W.H.F." cast into the wheels and handle plate. Retailers of the "London" mower.
FARMFITTERS LTD. :
A Gerrards Cross firm. Retailers of the “Kingfisher” rotary mower c1955 and the “Bushwakka” bracken cutter, c1960, as well as a range of other machines. Farmfitters were not only retailers but also made a variety of bodies onto which other people's engines were fitted (see Rapier).
FAUDELS LTD. :
Early 20th century retailers operating from 36-40 Newgate St., London EC. This firm imported a wide range of ironmongery including "Philadelphia" mowers c. 1905, and sewing machines.
FERRABEE John :
A maker of textile machinery and partner with Edwin Budding in the world's first lawn mower factory (1830). After the latter's death in 1846 Ferrabee continued to sell and improve upon Budding machines.
FLEET ELECTRICS LTD. :
The makers of a pre-war electric mains-driven roller mower, the "Fleet Electric". This firm was based in Regent Street, London and in 1939 were advertising their lightweight machine for £8.8.0d complete with grass box and 75ft. of flex. The machine resembled the contemporary Qualcast "Panther" with the addition of an electric motor.
(Aktiebolaget Flymo) Latterly a subsidiary of Electrolux and producers of the first hover mower in 1966. This machine was the brainchild of Danish industrialist Karl Dahlman, with British Patent 929, 610 (1963). Production started at Newton Aycliffe, Co. Durham, in 1964 and the business was acquired by Electrolux in 1968. Flymos were made in various sizes and with small Japanese petrol engines as well as the conventional mains-driven electric motor. Grass collectors were fitted in the late 1970s, about the time Flymo lost their monopoly of the hover mower when their patent expired.
FOLLOWS & BATE :
A Manchester (Gorton) firm which started making mowers in 1869 by introducing the "Climax", the world's first sidewheel machine which dispensed with the heavy land roller. They continued to produce a wide range of machines until the firm was taken over by Qualcast in 1938. Qualcast then continued to make mowers under the name "Folbate" until 1966.
FOOS (G.S.) & CO. :
An American company also known as the Foos Mfg. Co.
The London stores - retailers of catalogue mowers, both roller and sidewheel, many of which were made in the U.S.A. and others by Qualcast, (including the latter's Model "E" and roller machines) under the Gamages label. Many of these machines were simply marked "The Gamage".
GIBBONS, H :
Hungerford manufacturer of a lawnmower sharpening machine, c.1882.
GODIVA ENGINEERING :
(Formerly Nene Engineering Co.) Makers of the "Godiva" lawn mower which was awarded "highly recommended" in the 1925 motor mower trials in Regents Park, London. A range of 2-stroke and 4-stroke mowers utilising J.A.P. engines were produced by this company, which seems to have been started by former employees of Barford & Perkins (see "Godiva" above). One of the firm's workshops was at De Montfort Road, Reading, near to Allen & Simmonds factory. This latter company, as well as making the "Auto Culto" range of garden tractors, made many of the parts for the "Godiva" mower. The mowers produced were not unlike the contemporary "Automower" machines, although one four-stroke example had a distinctive slab-sided petrol tank mounted on struts.
GRAHAM, EMLEN & PASSMORE :
An American hardware company making mowers c1885. The Philadelphia Lawn Mower Co. was a spin-off from G.E.P. in 1895.
GRANITE STATE MOWING MACHINE CO. :
American manufacturers from Hinsdale, New Hampshire, USA. from 1904. Makers of the "Queen" and "Leader" mowers c1905.
A modern French subsidiary of Ransomes making rotary machines.
GREAT STATES CO. :
An American firm making sidewheel mowers from 1925. In 1932 this company moved to Shelbyville, Indiana, USA, and in 1936 was acquired by the American Lawn Mower Co. The firm is still extant as a part of the latter company.
GREEN Thomas :
One of the mower manufacturers who made improvements upon Budding's original design (see also Shanks and Samuelson), Thomas Green designed a lighter machine in 1855; his design winning the first lawn mower trial which took place at Chiswick in 1858. In that year Ransomes stopped producing Budding mowers and became retailers for both Greens and Shanks. In 1859 Green's were to produce the world's first chain-driven mower, the "Silens Messor" which was to remain in production until 1935. They continued to produce a wide range of mowers until the mower side of the firm was acquired by Hawker Siddeley in the 1960s and finally closed down. The Green name and designs were taken over by Reekie of Arbroath.
GRIFFIN, James Theodore :
London inventor, patentee of improvements to lawnmowers September 1871/March 1872.
GRIGG LTD. :
A firm based at the Sanderstead Works, South Croydon, and makers of the Grigg Power Unit for pony mowers. In 1924 their power unit for a 24 inch pony mower retailed at £27.0.0d, including gearing, controls etc. The unit could also be used to drive ancillary farm machinery such as chaff cutters.
GRIMMOND LAIRD :
An Arbroath firm which exhibited Morton's Patent mower in 1863.
GRIMSLEY (Messrs) & SON :
Manufacturers of a petrol-engined lawn mower in 1897, and probably pre-dating the machines by Stephenson-Peach, thus making them the world's first makers of petrol-driven mowers. The company's works were at Halford Street, Leicester.
GUEST, Sir Ivor Bertie :
Canford Manor, Wimborne, Dorset. Patentee of an improvement to lawn edgers, May/September 1868.
GUNN LTD. Thomas :
London-based retailers of the foreign-built "Easy Cut" c.1929.
HAHN INC. :
An American company based at Evansville, Indiana, USA. This firm took over The Eclipse Lawn Mower Co. in 1960. Manufacturers of the "Tournament Triplex" imported by Ransomes in the 1970s.
HANIKA IRON FENCE CO. :
HARRIS (Alex C.) :
Leicester manufacturers, makers of the "Gripper" sidewheel mower c1909.
HARTLEY & SUGDEN :
A Halifax firm making a range of pony mowers including the "Balmoral" and the "Osborne", late 19th century.
HASELTINE, LAKE & Co. :
Patent Agents for E.G. Passmore (Britain, 19th century).
US manufacturers and makers of the "Closecut" sidewheel mower (c1920).
HAYTER Douglas :
A building contractor who turned to mower production in 1947 at Spellbrook on the Herts/Essex border. The first mower from his company was the Hayter Motor Scythe which was a rotary machine but the firm also produced mowers with interchangeable cylinder/rotary units. From 1957 Hayters entered the domestic market with the "Hayterette". Various engines were used by the firm, including Villiers, Briggs & Stratton, Kohler & J.L.O. Many of their machines had bird names (eg "Condor", "Osprey" etc). The company was acquired by J.H. Tomkins in the early 1980s and Beaver Equipment Ltd. was acquired by the new company in 1987.
HELI-STRAND TOOLS LTD. :
A Rye (Sussex) firm manufacturing rotary mowers in the early 1960s.
HENDERSON (G) :
An Edinburgh and Kelso company established in 1884 to make agricultural machinery, they were known to have made mowers in the early 20th century.
HENLEY (M.C.) :
Late 19th century manufacturer of sidewheel mowers based at Richmond, Indiana, USA. Later these mowers were made by F & N. A 20th century example in an Australian collection is marked "New Henley".
HERSCHEL (R) MFG. CO. :
Peoria, Illinois, USA. Makers of an American sidewheel mower with spoked wheels. Handle is marked "New Diamond". No further information available (source Club member).
HILLS ARCHIMEDEAN LAWN MOWER CO. :
An American firm from Hartford, Conn. Makers of the "Archimedean" and "Leader" mowers. (NOTE: Referred to in this directory as Hills for the sake of brevity).
HILLTOP FOUNDRIES :
A Birmingham (Wednesbury) manufacturer, early 1930s. One example of a 12 inch sidewheel machine bears the words "Hilltop Wednesbury" cast into the side wheels. See also "Wimbledon".
HIRST (B) & SONS :
A Halifax (Yorkshire) based firm. In 1879 this company were offering chain and gear-driven roller mowers in sizes ranging from 10 to 20 inches, as well as their "XL" and "New Charm" machines.
HOLLAND J.H :
American inventor from Shasta, California, USA, and patentee in 1908 of a sidewheel mower with four sets of circular cutters revolving in the horizontal plane, the grass being guided onto these by "fingers". An American mower, the "Monta" was marketed in the1920s to the 1940s on this principle.
HOLT, Henry Percy :
Leeds inventor, co-patentee with William Dawes of improvements to lawn edgers, December 1874, June 1875.
American lawn mower manufacturers c. 1950. One 1952 product was a powered sidewheel machine with rubber tyres and a tubular steel handle.
A Birmingham firm, late 19th/early 20th century, which imported low-cost mowers from America such as the "New International" and "Premier" machines.
HOPWOOD John :
Patentee in the 1870s of the "Star" ("Patent Star") roller mower, with a factory based at Great Moor, Stockport.
HUNT & PICKERING :
British nineteenth century manufacturers of a gear-drive mower marked "Whitaker Patent" which had a bobbin-turned front roller and a draw-strap for 2-man operation. Both William Hunt and Vipan & Headby of Church Gate Works, Leicester advertised as being "late Hunt & Pickering".
HUNT William :
See Hunt & Pickering.
HURST (B & SONS) :
Late 19th century makers of children's playground equipment, the firm also made a small gear-driven mower.
HUSQVARNA VAPENFABRIKS AB. :
This Swedish firm originated in 1682 as gun makers and later made their name as sewing machine manufacturers. As well as the popular "Dux", examples of a small manual sidewheel mower by this firm c1960 are occasionally seen in the UK. This had a metal pole handle with the crosspiece consisting of a "vee with knobs on". In the 1990s the company introduced a flat solar powered mower which, once set up, needed no human guidance. This sold for around £2,000. The firm is now part of Electrolux.
IDEAL POWER LAWN MOWER CO. :
An American company based in Lansing, Michigan and making its first mower in 1914, by the late 1920s/1930s this company was specialising in golf course mowers such as the "Bulldog" and the "Greensmower". One of their products, c1927, had a 30 inch cutting cylinder with two side-wheels driven by a large diameter roller which was belt-driven from a single-cylinder 4-stroke engine. Advertisements show this being operated with a trailing seat. The founder of the firm was Ranson Eli Olds.
INGLETON E :
American inventor from Pottstown, Pennsylvania, USA, and patentee of "Ingleton's Lawn Mower", c1880 - a hybrid machine with two ridged drive wheels mounted at the rear of the cutting cylinder in place of the usual land roller, as in the "Charter Oak" mower. There is also a US patent 7/30/1895.
INGLETON MANUFACTURING CO. (THE) :
Makers of "Ingleton's Lawn Mower", the company also made steam ploughs.
Manufacturers of garden implements, including the "Valor" mower.
J.P. ENGINEERING CO. LTD. :
See Jerram & Pearson.
J.P. SUPER LAWNMOWERS LTD. :
See Jerram & Pearson.
US manufacturers, makers of the "Lawn King" powered mowers c1957.
Manufacturers of an 8 inch sidewheel mower c. 1938 owned by a Club member. This little mower with a steel handle was originally painted dark blue. It is understood that models were made both before and after World War 2, differing from each other in respect of the flanges cast into the inner edge of the wheel hubs. This firm has nothing to do with the car company of the same name.
JERRAM & PEARSON (J.P.) :
Jerram & Pearson first started making mowers immediately after World War 1, producing a very high-quality and expensive machine which is sometimes referred to as “The Rolls-Royce of mowers”. The company is first listed in the local Trades Directory in 1925 as J.P. Super Lawnmowers Ltd. of Meynell Road, Leicester (but is not mentioned in the previous 1920 directory), although in 1920 the two partners are listed as Arthur Jerram, Engineer, of Oadby and James Pearson of Baron-Pearson Engineering Co. of Leicester. One of their early products was a water-cooled mower with a water hopper similar to that found on stationary engines; this later utilised a Blackburn engine. By the 1930s they were making smaller mowers including the “Maxees”. They continued production after 1945 still using cast aluminium, a material which they had pioneered between the wars. The company continued trading as J.P. Super Lawnmowers ("Superlamo") until 1963 but in 1966 are listed as J.P. Engineering Co. Ltd. still of Meynell Road. The firm was bought by Cannon & Stokes circa. 1969 and they then closed down mower production at the end of 1971 (see Leicester Mercury dated 11.1.72). In 1974 all JP spares and stock seem to have been moved to Cliftons in Knaphill, Woking, where Richard Clifton intended to start production on a limited basis “to provide an out-of-season occupation for his workshop mechanics” (see trade magazine AGM in March 1976). Nothing seems to have come of this however, the hand-mower stock was scrapped, and the power mower stock sold to Dennis circa 1990 when they continued to make their own model based on the Super Mk.5B. (Grateful thanks to Club member Henry Ellis for much of the above information).
JOHNSON, CLAPHAM & MORRIS :
A firm of Fulham wholesalers who marketed "Jacem" mowers in the 1920s/30s. These machines were in fact made by "Qualcast".
British makers of a mains electric conversion for manual mowers in the 1950s.
KAYSALE LTD. :
A company with registered offices at 27 Clements Lane, London (c1950). Makers of the "Power Lawnmaster" electric conversion unit.
KENNAN & SONS :
Dublin manufacturers who advertised their "registered tilt gear" machine in the Great Exhibition Catalogue of 1862. Tilt action pony mowers, with one box at the front and another at the rear, were available in 26, 30, & 36 inch sizes. The firm's registered office was at Fishamble Street, Dublin.
LANCASHIRE (The) STEAM MOTOR COMPANY LTD. :
LANDERS, FRARY & CLARK :
(Abbrev. L.F.& C) An American firm, makers of the "Star" sidewheel mower, c1871. A company best known for its kitchen utensils.
LANDMASTER LTD. :
Originally Byron Horticultural Engineering, this Hucknall (Notts) firm was principally engaged in making garden machinery some of which (eg the "Gamecock") had a mowing capability. They did, however, manufacture the "Stoic" rotary mower in the 1960s.
LAPE Willard :
Late 19th century American maker from Syracuse, New York , USA, (see "Rex" and "Junior Rex").
LASSETTER (F) AND CO. LTD. :
Australian agents for Samuelson mowers, c1890.
A range of rotary mowers originally marketed by E.P. Barrus of Acton. These were Canadian mowers with 18 and 21 inch cutting widths introduced in 1962. By the 1980s these machines were being made at Downham Market in Norfolk by NJB Mowers Ltd. These had 127cc two-stroke engines and by 1984 had rear mounted grass bags. The first "Lawn-Boy" was made by Evenrude in 1932.
LAWRENCE John Post :
Originally the British agent for Lloyd, Supplee, & Walton/Supplee Hardware Co. Pennsylvania, USA machines and the founder of Lloyd Lawrence & Co.
LAWSON MFG. CO. :
An American firm from Milwaukee, Wisconsin, USA, makers of sidewheel mowers (see "Racine").
Catalogue mowers are found bearing this name, retailed by Peter Lewis's, the large London stores. Examples were made by the German firm of Brill in the 1920s/30s, and also by Suffolk who also made the Lewis De Luxe.
LEYLAND STEAM MOTOR COMPANY (The) :
Formerly the Lancashire Steam Motor Co. Ltd., this firm were manufacturers of steam lawn mowers to the design of James Sumner, c1895. In later years the company became British Leyland. See also Stott.
LLOYD, SUPPLEE & WALTON (formerly the Supplee Hardware Co.) :
American (Philadelphia) manufacturers of the "Pennsylvania" sidewheel lawnmower which was sold in large numbers in the U.K., the agents being Lloyd, Lawrence & Co. (later Lloyds of Letchworth). See also "Moto Mower".
LLOYDS OF LETCHWORTH :
See Lloyd Supplee & Walton and "Pennsylvania".
LOYD (Vivian) AND CO. LTD. :
London (Camberley) manufacturers of rotary mowers in the 1950s, the best known being the "Motor Sickle" which was exhibited at the 1950 Smithfield Show. The registered office was at 1, Balfour Place, London W.1.
LYMAN WILDER :
Late 19th century American manufacturers from Hoosick Falls, New York, USA, makers of the "Ajax" roller mower.
See Mower Pusher.
MACDONALD (W) :
A company operating from The Prospect Foundry, Leeds. Retailers of the "Imperial" mower in the 1860s.
MANN BROTHERS :
London manufacturers of manual single wheel reciprocating knife mower intended for long grass on lawns and orchards. This had an offset cutter consisting of two fixed serrated blades and one oscillating blade. When introduced in 1925 the price was 70/-d.
MAPPLEBECK & LOWE :
Birmingham agents in the 1840s and 1850s for Budding manual and pony mowers "with registered improvements No. 3074".
MARPLES (Wm & Sons) :
Early 20th century manufacturers of garden tools, items offered included the "Royal" sidewheel mower c1903 (although this may possibly be a catalogue mower). Based at the Hibernia Works, Sheffield.
MARSDEN (Jeremiah) :
A Salford company, agents for Budding mowers c1855.
A New Zealand manufacturer of rotary mowers.
MAST, FOOS & CO. :
Late 19th century mower manufacturers from Springfield, Ohio. Makers of the "Buckeye" mowers. The company also made stationary engines and windmills.
MATHER & TODD :
An American firm from Leominster, Massachusetts, USA. ; makers of the "Cheney" manual reciprocating knife mower c1877.
MATTERSON, HUXLEY & WATSON :
A Coventry firm, makers of the "Warwickshire" mower c1890.
MAXWELL (David) CO. :
Canadian manufacturer from St. Mary's, Ontario, making agricultural implements and lawnmowers, 19th/20th centuries.
A company formed as Croft Engineering after World War 2 to make garden tractors and motor scythes. Initially based at Croydon, the firm moved to Redhill and Rustington before being acquired by Allens in the mid-1960s - the name being changed to Allen Mayfield. In 1975 the company was sold to Arun Tractors and traded under the names of Arun Mayfield and Riverside Mayfield respectively before production ceased in 1981. Their early motor scythes had a 120cc Villiers Mk.10 engine but later models had Villiers 25 and eventually Briggs & Stratton engines.
MCBRIDE (Wm) & SONS :
A Cork firm. Early 20th century makers of a horse-drawn thistle-cutter. This is of interest inasmuch as it employed three forged steel knives mounted on a disc which revolved by spur and bevel gearing driven from the main axle. An early example of a disc mower, albeit for agricultural use.
MENDIP MOWER CO. :
Manufacturers based at Radstock, Somerset in the 1960s; makers of the "Little Robin".
MILBRADT MFG. CO. :
US manufacturers from St. Louis, Mo. Makers of a powered single-cylinder mower with guide wheels ahead of cutting cylinder c1926.
MILBURN William :
Engineer of Spear Street, Manchester, and maker of gear-driven roller mowers in the 1860s. Advertising material stated that "1,900 machines were sold in 1868 making a total of 5,700 sold since 1865". Available with either one or two handles, hand machines were offered in 1869 in 10 to 24 inch sizes, and horse and pony mowers from 26 to 48 inches. Prices ranged from £3.10.0d to £8.15.0d for manual machines and from £13.0.0d to £28.0.0d for donkey/horse machines. Later in the century the firm seems mainly to have been engaged in supplying American mowers to British retailers.
MILLARD BROTHERS :
A firm importing American mowers through their Houndsditch agency. See "American Champion" c1901 and "Empire" c1904. Many of the machines marketed by this company appear to have been made the F & N Lawn Mower Co. of Richmond, Indiana, USA.
MITCHELL F. (Nott'm) LTD :
A Nottingham (Derby Rd.) maker c1925, manufacturing mowers under licence from J.P. "Commended" at the May 1925 motor mower trials in Regents Park, London. See "Automo". Also makers of the "Dreadnought" range of gang mowers.
MONTAGU MFG. CO. :
Manufacturers from Grand Rapids, Michigan (USA), makers of the "Monta" mower.
MORTON'S PATENT MOWER :
A machine which appeared in 1863 manufactured by Grimond Laird of Arbroath. In the 1860s these mowers were being offered in sizes ranging from 12 to 48 inches, the larger sizes being for pony and horse haulage, at prices ranging from £4.15.0d to £27.0.0d (boxes extra).
MOUNTFIELD (G.D.) :
A Maidenhead firm started in 1962. Initially making cultivators with a rotary mower attachment, the firm soon established itself in the rotary mower market using a variety of power plants including Briggs & Stratton, Tecumseh, Suzuki, & Kubota. The firm was acquired by Ransomes in 1985.
MOWER-PUSHER COMPANY :
A sister company to Ransomes, Sims & Jefferies, they joined other firms in the early 1920s to produce a motor conversion unit for larger manual and horse-drawn mowers. This unit was powered by a Villiers 2-stroke engine, the operator sitting on a tractor-type seat on top of the unit, which was shackled to rear of the mower. One such machine restored in Essex in 1995 bears the serial no.817 and the Patent No. 200-581.
A product of Ransomes introduced in 1960, the "Multimower" was that company's first rotary mower. There followed a range of "Multimowers" for the professional market with a variety of engines and cutting options including a reel cutter. By 1964 the basic 27 inch model sold for £150 with a 30 inch cutting cylinder being offered as an optional extra at £58.
NASH (H.R.) LTD. :
A Surrey (Wandsworth) firm, makers of the "Boadicea" rotary mower c1963. The company produced motor conversion units in the 1920s.
NELSON Sven.T. :
A Chicago, USA inventor and, in 1910, patentee of an ingenious system of using the engine of a petrol-driven mower to drive a fan used to suck cut grass into a disposable bag (as on a vacuum cleaner). It is not known if a mower was built by him using this principle of grass disposal.
NENE ENGINEERING CO. LTD. :
Makers of the "Godiva" lawnmower (c1920) after the demise of its previous makers, Barford & Perkins of Peterborough. Later became Godiva Engineering Ltd.
NETTLEFOLD & SONS :
A London-based firm with registered offices at 54 High Holborn. Manufacturers of the ornate "Coventry" mowers of the 1870s and 80s.
NJB MOWERS LTD. :
A Downham Market (Norfolk) firm making "Lawn-Boy" rotary mowers in the 1980s.
A Norwegian firm importing a range of rotary mowers to the UK in the early 1960s.
NUTT ENGINEERING LTD. :
A Cambridge engineering firm making mowers post World War 2, manufacturers of the "Hayn" range of mowers in the 1950s/60s.
O'BRIEN, THOMAS & CO. :
London importers of American mowers such as the "Swift" c1901, many of which bore their name.
Australian manufacturer producing mowers for the home market. According to American collector Jim Ricci "Ogden began making mowers about 1946. In 1961 they bought Qualcast - Australia. The lawn mower production operation was closed down and sold off in 1974. I believe that only parts were available after that time, not complete mowers". Jim goes on to say that when he visited the parent company in Oakleigh, Melbourne, they had no lawn mower history available and then made only locks and security products.
OHMER, A.J. :
An American inventor from Hamilton, Ohio, USA. ; maker of the peculiar "Novelty" reciprocating-knife machine, c1874.
A Ripon firm making pony mowers and other smaller mowers such as the"Villa", late 19th/early 20th century, including the "Studley Royal". The founder, William Parkinson is recorded as patentee of improvements to lawnmowers. January/April 1869.
PASSMORE, Everett Griscom :
American patentee of a sidewheel mower in 1869.
PATTISSON (H & CO.) :
A Streatham (London) based firm manufacturing garden accessories, including pony boots.
PHILADELPHIA LAWN MOWER CO. :
Late 19th century American makers of "Philadelphia" mowers. Many of the firm's products were sidewheel machines such as the "City" and the "Dewey", whilst other mowers were given an alphabetical designation (eg "Style H", "K", "M" etc.). The firm was originally a spin-off c1880 from Graham, Emlen & Passmore.
PICKSLEY, SIMS & CO. :
A Manchester (Leigh) firm making sidewheel, roller and pony mowers in the 1870s.
An Eire firm (still existing in 1999) based at Wexford. Models include the "Hector" and the "Jewel". This firm was started in the 1830s by James Pierce and made a variety of agricultural and forge equipment, first producing lawnmowers in 1928. Now (1999) part of the Smith Group. (See article by Andrew Hall in FHEC Magazine July/August 1999).
PLIMPTON J.C. & Co. :
Liverpool retailers (late 19th and early 20th centuries) specialising in the importation of sidewheel mowers from the USA. (See "Closecut", "New England" etc.).
PLUCKNET, T.J. :
Patentee in 1805 of "a new method of mowing corn, grass, and other things, by means of machine moving on wheels, which may be worked either by men or horses" (patent 2859/1805).
PONTIAC LAWN MOWER CO. :
An American company established by Col. Edwin George in 1919. See also Moto-Mower.
Catalogue mowers were made for this large store by firms such as Follows & Bate, who also made the Pontings Double Life.
Australian manufacturer producing mowers for the home market.
POWER SPECIALITIES LTD :
A Slough firm (originally at Maidenhead), makers of the Rotoscythe, the world's first rotary lawnmower. Active from 1933, the company re-started production in 1945 and continued until it was acquired by J.E. Shay Ltd. of Basingstoke who continued to make mowers under the Rotoscythe name.
PRESSURE JET MARKERS :
A London firm, makers of the "Scimitar" range of rotary mowers in the 1960s.
PUGH, Charles H. :
The name, derived from "Quality Castings", adopted by the Derwent Iron Foundry when it became a public company in 1928, although Derwent had made mowers under their own name since 1920, following the Board of Trade's embargo on foreign imports. Much of this firm's work initially was to make components for machines such as the ATCO "Standard". Qualcast acquired Follows & Bate in 1938 and in 1958 took over the Kaufmann Group which included Suffolk Iron Foundries. ATCO joined the Group in 1962 followed in 1967 by Birmid Industries (Birmingham Aluminium Midland Cylinders), the whole becoming Birmid-Qualcast. This in turn was acquired by Blue Circle Industries in 1988 when the foundry side of the business was sold off. In 1991 there was a further name change to Atco-Qualcast Ltd. when the Derby site was closed down and activities transferred to Stowmarket. The company was acquired by the Bosch Group in 1996.
RAGG, Alban Edward :
Clerk in Holy Orders, Chester. Patentee of an improvement to grass edgers August 1876/February 1877.
RANGER, E.F. :
Designer and early manufacturer of the "Easimow" (ca. 1953), later manufactured by British Anzani.
RANSOME & MAY :
A famous Ipswich firm, makers of agricultural implements since 1789. Originally Ransome & Son, the company became Ransome & Sons (1818), J & R Ransome (1825), J.R. & A Ransome (1830), Ransomes & May (ca. 1851), Ransomes & Sims (1852), Ransomes, Sims & Head (1869), Ransomes, Head, & Jefferies (1881) and finally Ransomes, Sims & Jefferies Ltd. (1884). Ransomes acquired manufacturing rights to Ferrabee & Budding mowers in 1832, but relinquished these in 1858 to become wholesalers for the lighter machines made by Shanks and Greens. They re-entered the mower market in 1861 with a Budding-type machine and in 1867 produced the "Automaton". In 1902, as Ransomes, Sims & Jefferies, they were the first company to produce a petrol-engined lawn mower commercially, although not the first to make such machines. One of the largest UK producers of mowers from before the First World War until the 1960s, Ransomes gradually withdrew from the domestic mower market in the 1970s to concentrate on the professional and local authority market. However, the acquisition of the Mountfield and Westwood companies in the 1980s brought a renewed interest in domestic mowers. In 1989 Ransomes acquired Cushman & Ryan of Lincoln, Nebraska, USA. By the 1990s the firm was mainly specialising in mowers for the professional golf market; the American factories producing rotary machinery with the UK side of the business specialising in cylinder mowers. In November 1997 a successful bid for the company was made by the American company Textron Inc.
RANSOMES CUSHMAN RYAN :
RANSOMES, SIMS & HEAD :
RANSOMES, SIMS & JEFFERIES :
RATCLIFFE (H) & SONS :
An Essex firm with a foundry at Great Holland this company made their own 10 and 12 inch manual roller mowers c1915 utilising bicycle-gauge chain. The company later became Ratcliffe Bros. (ca. 1923) and finally A. Ratcliffe (ca. 1933).
READING HARDWARE CO. :
Early 20th century American manufacturers from Reading, Pennsylvania, USA. Makers of the "Reading" ball-bearing sidewheel mower.
REEKIE ENGINEERING :
An Arbroath firm who took over Greens name and designs when that firm was closed down in the 1960s. Manufacturers of multiple gang units.
REIL CORPORATION :
RENDLE (W. EDGCUMBE) & CO. LTD. :
In March 1915 W. E. Rendle was granted a patent (no. 10371), from an application which he had submitted in April 1914, for a portable petrol-driven mower pusher unit. This was further improved by a second patent granted in 1915 (no. 6284). There was also a US patent. By the early 1920s these units were in production and were awarded "Highly Recommended" in the May 1925 motor mower trials at Regents Park, London. Head Office was at 5, Victoria Street, London S.W.1. The unit sold for 44 guineas in 1925. With its 'A'-frame chassis it appears to be a somewhat sturdier (and by the same token heavier) machine than the M.P. The operator's seat was trailed and did not, as in the M.P., form an integral part of the unit itself. A fine example of the Rendle mower pusher is owned by a Club member.
US manufacturers of rotary mowers c1950.
RIVERSIDE MAYFIELD :
ROBINSONS OF WINCHESTER LTD. :
Main distributors of the "Jobber" reciprocating knife mower of the 1950s/60s.
ROGERS IRON CO. :
Late 19th century American manufacturers from Springfield, Ohio, USA; makers of the "Cruiser" and "Bayley" mowers.
ROLLINS (John G) & CO. :
Importer of American mowers in the late 19th century. Based at Old Swan Wharf, London Bridge, this firm imported American machines such as the "Junior Archimedean".
ROSEMAN MOWERS :
An American firm from Evanston, Illinois.
ROYAL ENFIELD :
See Enfield Cycle Co.
This Banbury firm of agricultural engineers started making Budding mowers in 1854 but soon switched to mowers designed by Samuel Boyd who had patented an improvement to the Budding mower to provide a lighter machine. In 1855 Samuelsons were selling Budding-type mowers in 16, 19, 22, 25, and 30 inch sizes with prices ranging from
German manufacturer of garden machinery, including small sidewheel mowers with tubular steel handles - 1970s.
SCOTT BONNAR :
Australian manufacturers from Adelaide, South Australia. This firm was making mowers by the mid-1930s and in 1943 were recipients of an order by the Australian Army. Many of their models were electric but some were fitted with a Buzacott hopper-cooled petrol engine similar to the British Lister "D".
SECREST MFG. CO. :
An American manufacturer from Cleveland, Ohio. Makers of the "Capitol" lawn trimmer and edger, c1904.
SELIG, SONNENTHAL & CO. :
A company based in Queen Victoria Street and Lambeth Hill, London, and agents for the "Easy" sidewheel mower, c1882.
SENACA FALLS LAWN MOWER CO. :
Late 19th century American manufacturers from New York; makers of the "Lewis" mower.
SHANKS Alexander :
An Arbroath engineer, Alexander Shanks was engaged by W.F. Carnegie to improve upon Budding's mower so that it could be more easily pulled by two men or a pony. This design was patented in 1842 and, because Budding's original patents did not cover Scotland, it was able to enter full production. Shanks produced a steam powered mower in 1902. A wide range of mowers was produced both before and after the two World Wars, but in later years the company ran into financial difficulties and turned to making gang mowers for ATCO, eventually being taken over by that company in 1960. The Shanks name finally disappeared from the mower scene about 1970.
SHAW (John) & SONS :
Manufacturers of the "Governor" mower. For a number of years this Wolverhampton firm imported a variety of American-built mowers into Britain, including the "Keen Kutter" and the "Easy Run".
SHAW John :
Manufacturer based at Junction Works, New Wortley, Leeds and extant in 1865. Products included “Shaw's Patent Flexible self-adjusting lawn mowing machines”. Two designs of machine are known to have been offered, both manual roller mowers.
SHAY (J.E.) LTD. :
A Basingstoke firm which acquired Power Specialities Ltd. in 1952 and continued to manufacture mowers under the "Rotoscythe" name. The firm was taken over by Wolseley Engineering in the early 1960s, whereupon mower production ceased. Roller mowers were made in addition to rotary machines.
SIMPSON (WILLIAM) & SONS :
Early 20th century makers of both steam and motor mowers. Registered office was 1011 Pennyslvania Building. Philadelphia, USA. They made the transition from steam to petrol-engined mowers in 1910.
SISIS LTD. :
A Macclesfield firm. Manufacturers of multiple gang units powered from a tractor-driven power take-off shaft, c1977.
SLAYMAKER (F) & CO. LTD. :
Makers of the "Challenge" lawnmower, c1950. Factory was at 1, North Road, London N.7.
SMALL (Peter) :
Engineer and lawn mower manufacturer of Forfar, Scotland - agent in the late 19th century for "Eclipse" and "Pony" machines, but also made mowers himself.
SMALL ENGINES LTD. :
A Birmingham firm making motor conversion units in the early 1920s, one of which was the "Simplex".
SMITH & ELLIS LTD. :
London-based retailers of the British-built "Premier" mower c1929.
SOLO POWER EQUIPMENT (UK) LTD. :
A Chorley (Lancashire) firm marketing the "Piccolo" and "Piano" rotary mowers in the 1980s.
STANDARD INSULATOR CO.(The) :
One of the1950s/60s retailers of "The Four Seasons Scrub Cutter".
A British tool-making company making small electric rotary mowers 1950s/60s.
STAPLETON E.M. :
A Kansas, USA inventor and patentee, in 1908, of a sidewheel mower with a large flywheel mounted above the cutting cylinder. Were any of these built ?
STEARNS, E.C. :
A late 19th century American firm from Syracuse, New York, engaged in supplying catalogue mowers to UK retailers. In the late 19th century they made a sidewheel ball-bearing mower called "The Stearns" which they advertised with the slogan "see those balls".
STEPHENSON-PEACH W.J. :
An inventor and designer from Burton-on-Trent and Professor of Engineering at Repton and Cheltenham public schools, W.J. Stephenson-Peach experimented with a variety of powered lawn mowers at the end of the 19th century. His petrol-engined machine was later sold commercially by Coldwell in the United States.
STEVENS MFG. CO. :
A Canadian firm from London, Ontario. Makers of the "Dandy" sidewheel mower patented in November 1897.
STOTT (Fertilizer & Insecticide Co.) :
This Manchester company appear to have been early agents for James Sumner's steam lawnmower, later made and sold by the Lancashire Steam Motor Company (later Leyland).
SUFFOLK IRON FOUNDRIES :
A Stowmarket firm started in 1920 by L.J. Tibbenham. In 1925 the company added lawn mowers to their range of products. These were sidewheel machines made under the Suffolk name and those of retailers such as Selfridges. In 1954 the popular "Colt" and "Punch" powered roller mowers were introduced. In 1958 the company became part of the Qualcast Group, and in 1967 this Group (by then including ATCO) merged with Birmid Industries to become Birmid Qualcast. Suffolk amalgamated with ATCO in 1969 to become Suffolk Lawn Mowers, all production then moving to Stowmarket. Birmid Qualcast were acquired by Blue Circle Industries in 1988 and in 1992 there was a further name change to Atco-Qualcast.
SUMNER James :
The inventor of the first steam lawn mower, 1893. Sumner's machine was available in 25, 30, and 36 inch cut, and the steam power units were also sold separately to put on to horse drawn machines. See Lancashire Steam Motor Co., Leyland, and Stott.
SUNBEAM CORPORATION/SUNBEAM-VICTA :
SUPERIOR MACHINE CO. :
American manufacturers from Springfield, Ohio. Makers of the "Lagonda" mower, c1890.
SUPPLEE HARDWARE CO. :
An American firm from Philadelphia and manufacturers of the "Pennsylvania" and other sidewheel mowers imported into this country by Lloyd Lawrence & Co., late 19th and early 20th century. This company appears to have started in 1889 as sales agents for J. Braun.
SUTTONS SEEDS :
A Reading firm of seed merchants whose name appears on a variety of mowers made by manufacturers such as Ransomes; the "Chain Automaton" being retailed by Suttons long after it had been superseded in the Ransomes catalogue by the "Patent Chain Automaton" in 1892. Suttons name also appears on "Pennsylvania" mowers.
SYMM Joseph :
A Northumberland inventor and patentee of Symm's Patent Thistle Cutter later marketed by his executors. This was a horse-drawn mower with wide-diameter cutting cylinder, which won medals at Alnwick (1890) and Morpeth (1893). Ransomes made a smaller version of this which is illustrated in their 1915 catalogue (see "Bents Cutter").
TANGENT TOOL & ENGINEERING CO. :
A Keynsham (Bristol) firm started by a Mr. Montague-Smith after World War 1 and which allegedly made lawn mowers prior to it being taken over by H. Brecknell for the manufacture of "Keynsham" mowers in 1931.
TARPEN ENGINEERING CO. LTD. :
A London-based firm making electrical and garden machinery, this company marketed the "Grassmaster" and the "Vergemaster" three-wheeled reciprocating-knife cutters in the mid-1950s.
Canadian manufacturers established at Guelph, Ontario in 1873. In 1890 they bought out A.R. Woodyatt.
TEAGLE (W.T.) MACHINERY LTD. :
A firm started in 1943 at Blackdown (Truro), manufacturers of powered hedge cutters and reciprocating knife mowers in the late 1950s/early 1960s, including the "Jetcut" and the "Jetscythe". This firm also produced a range of conventional rotary mowers in the late 1950s which sold at £25.0.0d and £28.0.0d according to size. The firm was still extant in the 1990s but mower production had ceased.
TEXTRON INC. :
A large American company making aircraft and machinery. In November 1997 this firm made a successful bid for Ransomes, Cushman & Ryan.
THAMES BANK IRON CO. :
Late 19th century manufacturers of castings for horticultural purposes based at Upper Wharf Street, London. A manual roller mower is featured in their 1875 advertisement, although at that time they did not claim to make mowers.
THISTLE CUTTER :
See Symm (Joseph). See also Bents Cutter.
THOMAS (EDWARD) & CO. :
British manufacturers of the 1970s "Brott" mowers. Based at Oswestry.
THOMAS MFG, Co. [St Louis] :
An early 20th century American firm from St. Louis. Manufacturers of the Townsend "Royal" mower under licence from that company. Not to be confused with the Springfield manufacturer of the same name.
THOMAS MFG. Co. [Springfield] :
A late-nineteenth century American firm from Springfield, Ohio. Makers of sidewheel machines such as the "Greyhound". Also manufacturers of an edge trimmer c.1883.
TOWNSEND (Samuel Percy) & CO. :
An American maker from Orange, New Jersey, known to have made a range of mowers c1900, including a ball-bearing sidewheel machines and a triple-ratchet pony mower. These machines were imported into Great Britain in some numbers. The company left Orange in 1920 and established itself at Bloomfield, NJ, until closure in 1936.
TOWNSEND, George :
Inventor from Wimbish, Essex. Patentee of improvements to lawn edgers March/September 1870.
TRACTORS (LONDON) LTD. :
See Trusty "Mowmotor".
Swiss manufacturers of rotary and ride-on mowers (1970s).
UNIVERSAL LAWN MOWER CO. :
An American firm from Troy, New York; makers of the "Universal" sidewheel mower, c1900.
Originally a French company, makers of the "Turnicut" agricultural mower.
VARD MAN :
American manufacturers from Jackson, Michigan. In the 1960s they were importing ride-on rotary mowers into the UK; the British agents being B.A. Rolfe of Romsey, Hampshire.
An Australian company making rotary mowers from 1953 onwards, the original Australian patent (8770/55) was filed by M.V. Richardson on 2 May 1955. In 1970 the company joined the Sunbeam Corporation and by the mid-1970s were producing heavy duty turf equipment as well as a variety of other products. In 1983 the company celebrated its first 30 years by making its 4 millionth mower. In 1987 the firm was acquired by the Reil Corporation, thus returning the company to Australian ownership. In 1988 Directors of the company effected the largest management buy-out in Australian history when they purchased Sunbeam-Victa. In 1991 E.P. Barrus were appointed as UK distributors. This firm exports widely and it is claimed to be (1996) the largest mower manufacturer in the world. By 1996 the UK importers were Victa (UK) of Watford. A toy rotary mower in a member's collection bears the name Victa Corvette - was this a product of this company?
VIPAN & HEADBY :
See Hunt & Pickering.
WALLIS BINCH :
See Binch (Wallis).
WARREN Charles :
The Ipswich inventor of "an improved friction gear and noiseless clutch for lawn mowers". The rights for his patent were put up for sale by the American Patent Agency in 1890 under the heading of "Novel Lawn Mower".
WBF & S LTD. :
London wholesale retailers in the inter-war period supplying "catalogue" mowers made by a variety of manufacturers, including Qualcast.
WEBB (Henry) AND COMPANY :
A Birmingham firm which added mowers to their range of products in 1928, their first mower being the sidewheel "De Luxe". They also made the chassis for mowers made by the Enfield Cycle Co. Webb are best known for their wide range of small manual roller mowers (eg the "Whippet") both before and after the World War 2. They also made the "Miniature" mowers for children in the 1950s. Webb became part of the Wolseley Hughes Group in 1963 but continued to trade under the Webb name until 1973 when they became Wolseley Webb. The company became part of the Qualcast Group in 1984 and apart from one model, the 1990 "Diplomat", the name then disappeared from the mower scene.
WESTWOOD ENGINEERING :
Mower and garden tractor manufacturers acquired by Ransomes in 1985. Seven models of garden tractor were made in 1986 and twelve some ten years later. These employed a variety of engines and cutting widths.
WHITAKER, J :
Makers of "Whitaker's new patent lawn mowing machine" a mid-19th century mower resembling the Budding designs. This was advertised in 13 to 30 inch cutting widths, with prices ranging from £4.10.0d to £16.0.0d.
WHITE & BATEMAN :
Late 19th century manufacturers engaged in supplying catalogue machines to UK retailers.
WHITMAN & BARNES MFG. CO. :
Late 19th/early 20th century manufacturers and importers from Chicago, Illinois, USA with offices in Queen Victoria Street, London E.C. The company sold its lawn mower operation in 1919.
A 1960s mower made by, or for, the razor-blade manufacturers of that name. This was a sidewheel mower having a tubular steel handle, flexible blades of the "Flexa"-type, and a plastic front-fitting grassbox. These were still in production in the 1980s; Wilkinson Sword by this time using the "Flexa" name.
WILLIAMS & SON. :
Manufacturers (under licence) of an "Archimedean" mower - late 19th century.
WILLIAMS & TALCOTT :
Patentees of improvements to lawnmowers 1870. UK address is given as City Road, Mddx.
WILLIAMS, Aaron W.C. :
Inventor of Bridgeport, Conn.(USA), patentee of improvements to lawnmowers January/April 1869.
WILSON, WHITELEY & CO. :
American manufacturers from Springfield, Ohio. See Whiteley.
WOLF TOOLS :
A large tool-making company which started making lightweight mains electric rotary mowers in the 1960s, using hardware shops and garden centres as retail outlets.
WOLSELEY HUGHES/WOLSELEY WEBB :
WOOD, (WALTER A) MOWING & REAPING MACHINE Co. :
Hoosick Falls, New York, USA. Makers of agricultural mowing machines and reapers during second half of 19th century.
WOODS PATENT :
The Woods Patent grass mowing machine was marketed in the UK by W. M. Cranston and advertised in the Great Exhibition Catalogue of 1862. This machine was probably a product of the Walter A Wood Mowing & Reaping Machine Co. of Hoosick Falls, New York, USA.
WOODYATT (A.R.) & CO. :
WORCESTER LAWN MOWER CO. :
American manufacturers from Worcester, Massachusetts, USA. Makers of a sidewheel mower, c1904, advertised as having "parallel bearings". A conventional "T"-handled machine. This company was later bought out by the Savage Arms Co., Chicopee Falls, Ma. and mowers under both brand names continued to be made until 1960.
WORTHINGTON Charles :
The American inventor (ca. 1913) of the use of multiple mowers to form a gang-mower unit, an idea pioneered in the UK by Ransomes, Sims & Jefferies c1920. The Worthington company was later taken over by the Jacobsen Corporation. Also connections with the Shawnee Mower Co. and the Worthington Tractor Co.
A north London firm producing mower-pusher units after World War 1.
A 1940s version of the pre-war Follows & Bate "Magic" sidewheel mower. Marketed under the "Folbate" name after that firm had been acquired by Qualcast.
ACE [Eclipse] :
A 1930s sidewheel mower made by the Eclipse Lawnmower Co. Similar to the "Lady".
ACE [Ransomes] :
A product of Ransomes, Sims & Jefferies this was a sidewheel mower made in the 1930s. This was advertised as an "easy running machine for small lawns. cutting cylinder welded to ensure long service". Made in three sizes it sold from 41/3d in 1939. The "Ace" was also available as a bank mower with a 75 inch pole handle.
ACME [American Die & Tool] :
An early 20th century sidewheel mower with 11 inch drive wheels and roller bearings, made by the "American Die & Tool Co." of Reading, Pennsylvania, USA.
ACME [Blair] :
A late 19th century product of the Blair Mfg. Co., Springfield, Massachusetts, USA, this was a sidewheel machine with land wheels at the rear of the cutters. The 24 inch model had four such wheels and the smaller models three.
A 1990s product of ATCO, this was a 16 inch rotary mower with electric start.
A late-1940s American sidewheel mower made by the Eclipse Lawn Mower Co. This was available in 16 & 18 inch sizes and like other mowers from the same company had the Adams self-sharpening device.
A product of Ransomes, Sims & Jefferies similar to the "Overgreen" this was made for the professional market c1950 and consisted of a powered unit in front, using a Sturmey Archer engine, and a trailed unit by Sisis.
A product of ATCO (Suffolk), this was petrol-engined hover mower from the 1980s.
A product of Qualcast, this was a petrol-engined 16 and 19 inch hover mower designed for larger gardens in the 1980s.
AJAX [Lyman Wilder] :
An odd American mower patented by W.C. Farnum in March 1871 and manufactured by Lyman Wilder of New York. This was a roller machine with a disc-like rear land roll acting upon a series of "propeller"-type blades moving in the vertical plane, quite unlike the conventional cutting cylinder. A "V"-handle was fitted. The cutting width appears to have been about 10 inches.
AJAX [Ransomes] :
A product of Ransomes, Sims & Jefferies the "Ajax" was a manual roller mower made from 1933 until the Mk V in 1972. Mks I and II were made prior to 1939, the rest being post-War.
Sidewheel machine dating from about the time of WW1 (example is seen in the Welsh Rural Life Museum at St. Fagan's). May originate from the north of England, perhaps York.Could be a catalogue mower.
ALL BRITISH :
A sidewheel mower from the mid-1930s supplied by John Palmer Ltd., Portsmouth, (Victory Brand Garden Tools). Made in 10 and 12 inch sizes these retailed in 1934 at 28/6d and 30/- respectively. One "All British" mower in an Essex collection bears the name "Moweesi" on the handle but the editor does not discount the possibility that this may have been a replacement handle.
ALLEN SCYTHE :
First produced in the mid-1930s the popular Allen Scythe remained in production until the 1970s. A reciprocating knife mower, the Allen Scythe can be found either with a 2-stroke or 4-stroke engine. Early examples are distinguishable by the in-line (rather than transverse) petrol tank. A scaled-down version with a JAP 2A engine was known as the "Baby Allen Scythe".
ALLEN SICKLE :
A product of John Allen of Oxford, this was a 1960s professional rotary mower designed for rough grass areas. The 22 inch cut machine sold for £95 in 1964. A slightly smaller version of the "Champion".
A Shanks triple-pony gang mower with an 84 inch cut offered in 1923.
A self-propelled reciprocating knife mower in which the operator walks in front of the machine. One example in the UK is marked "Alpina Export" which would imply that this is a foreign machine. (Perhaps a reader can supply dates).
A n American 1940s sidewheel mower made by the Eclipse Lawnmower Co., this was available in a 16 inch size only.
A sidewheel mower, probably made the USA, being offered for sale in the UK by Johnson, Clapham and Morris Ltd., in 1908. The name implies that at least some of the parts were of aluminium construction.
A product of Samuelson c1877, this was a gear-driven roller mower with a "T"-handle available in 8 and 10 inch sizes. A curved "baby's crib" type grass box was offered.
A powered roller mower by Hayter introduced in 1967 this was the first pure cylinder mower made by that company and came in a variety of sizes and with a variety of engines, including B.S.A. and Briggs & Stratton. A fine turf version was introduced in 1970.
AMERICAN CHAMPION :
An American sidewheel mower imported by Millard Bros. of Houndsditch c1901. This was advertised in 8 to 18 inch sizes with prices in 1902 ranging from 12/4d to 18/8d.
The name under which the Army & Navy stores retailed the Follows & Bate "Magic" all-steel sidewheel mower.
A product of Ransomes, Sims & Jefferies, the "Anglia" was a manual roller mower introduced in the late 1920s and available in three sizes. It was advertised as giving "an extra clean close finish". In 1929 it sold from £6 which, by 1939 had risen to £7.2.6d.
A product of Follows & Bate offered in 1901 "with patent ball bearings", and available in 8, 10, 12, 14, 16 and 18 inch sizes by Thomas McKenzie & Sons, Liverpool. This probably refers to the "Anglo-American" (see below).
A range of late 19th century mowers made by Follows & Bate. The smaller versions were sidewheel mowers available in sizes from 12 to 20 inches. The larger sizes were pony mowers available in 24 and 30 inch widths. The mower was being sold in 1871 in sizes from 12 to 30 inches at prices from £4.0.0d to £14.0.0d with prices for larger machines up to 48 inch width available on request.. By 1887 the 24 and 30 inch pony mowers retailed at £10.10.0d and £14.14.0d respectively. A special version made especially for ladies was called the "Croquet".
An 1892 product of Ransomes, Sims & Jefferies, this was a sidewheel mower of conventional design deriving from the export-only "Paris" and the home-marketed "New Paris" designs. By 1915 the original machine had been superseded by the No.2 version which was then being offered in 6, 8, 10, 12, 14, 16, 18 & 20 inch sizes at prices ranging from £1.10.0d to £4.5.0d (grass boxes extra). The 10 inch mowers and upwards were fitted with a 6-bladed cutting cylinder. Colour scheme was pale blue.
A late 19th century sidewheel mower marketed by Peter Small of Forfar, Scotland. This was a conventional "T"-handled mower available in 10, 12, 14 and 16 inch cutting widths.
A product of Ransomes, Sims & Jefferies this was a powered sidewheel mower which replaced the "Gazelle" in 1956 and continued in production until 1993.
An early 20th century sidewheel mower by John Crowley & Co. This was a conventional 'T'-handled machine advertised in 1913 as "a marvel of cheapness".
An American manual roller mower first introduced in 1870 by the American firm Hills of Hartford, Connecticut, USA, the Archimedean had a cutting cylinder working on the principle of the Archimedean screw. Early machines had skids rather than a front roller, but these were soon discarded. The "Archimedean" was sold by many ironmongers up and down the country, one of the UK Agents in 1884 being John G Rollins of London Bridge. They appear also to have been made under licence in Great Britain, with machines which included the "New Archimedean" (see Cottiss). See also "Junior Archimedean".
ARIEL [Lloyds] :
A product of Lloyds, this was a powered sidewheel mower made in the 1950s for rough grass and banks. With a Villiers or a JAP engine, this mower was available with either a four or seven bladed cylinder.
ARIEL [Ransomes] :
A product of Ransomes, Sims & Jefferies c1950, this was a manual roller mower.
A 1940s American sidewheel mower made by the Eclipse Lawnmower Co., this was available in 16 & 18 inch sizes and, like other mowers from this company, was fitted with the Adams self-sharpening device. In September 1949 the two sizes were available at $17.95 and $18.95 respectively.
ARMY & NAVY MOWERS :
Catalogue mowers marketed through the "Army & Navy Stores", an example of which is the "Special" (see below). There were also "Auxiliary" and "Victoria" mowers made by Follows & Bate for retail through the Auxiliary stores and the main store in Victoria Street.
ARMY & NAVY SPECIAL :
A catalogue mower from the mid-1930s, this was a sidewheel machine offered in 10 or 12 inch cut which retailed in 1934 at 18/6d and 20/- respectively.
A product of Ransomes, Sims & Jefferies c1960.
An American-built catalogue mower c1930, one surviving example (an 8 inch sidewheel mower) has "The Ashton - East Sheen" cast into the wheels.
A product of Ransomes, Sims & Jefferies c1950, this was a manual roller mower.
A product of Qualcast, this was a 14 inch version of the "Concorde" introduced in 1974. Not proving popular, it was discontinued in 1979.
A series of reciprocating knife mowers made by ATCO from the 1930s. Originally a single wheel machine similar to the Lloyds "Autoscythe", the "Atcoscythe" had developed by 1955 into a two-wheel self-propelled machine with a variety of accessories including twin rotary disc cutters.
ATLAS [Hartley & Sugden] :
An 1870s gear-driven mower by Hartley & Sugden of Halifax, this was available in a variety of sizes, the largest being pony and horse mowers. Very small sizes, in 6, 8, & 10 inches, were made for use by "ladies or boys".
ATLAS [Ransomes] :
A small manual pressed-steel roller mower produced by Ransomes, Sims & Jefferies in the late 1930s. Made in 12 inch width only, it sold at the very competitive price of 67/6d (with grass box) in May 1939.
AUTO DRIVE :
A product of Victa c1974, this was an Australian rotary mower fitted with a snorkel air filter and a "dead man's" handle to control the drive. A "magic eye" was fitted to indicate when the grass box was full.
AUTO SWIFT :
A product of Suffolk Iron Foundries c1957.
A product of Ransomes, Sims & Jefferies designed for fine turf surfaces such as bowling greens. By the late 1950s the "Auto Certes" 18 inch model was selling for £81.10.0d and for the 1961/2 season the Mark 4 with its 10-blade cylinder and 98cc Villiers engine was selling for £95.0.3d (including Purchase Tax). By the 1970s and 80s the "Auto-Certes" was dominating the specialist-mower market.
A post-1945 reciprocating-knife mower by Lloyds, the Auto Sickle was a self-propelled two wheel development of the pre-war "Autoscythe". Having a rectangular frame, this mower had two large wheels on either side of the centrally-mounted engine, the cutter-bar and the handles balancing each other fore and aft. In 1949 the "Auto-sickle" was being sold at £60.
A product of ATCO c1975, this was a powered roller mower with a 4-stroke engine available in 24 and 30 inch sizes. A trailing seat was advertised as "faithfully following the mower even around right-angled flower beds".
A range of mowers by Ransomes of Ipswich. The gear-driven "Automaton" appeared in 1867 made by Ransomes, Sims & Head in the 1870s and was produced in a wide range of sizes. In 1885 Ransomes, Sims & Jefferies produced the gear-driven "New Automaton" which won silver medals at the 1885 Inventions Exhibition and at the Liverpool Exhibition the following year. These latter machines were available in sizes from 8 to 24 inches and prices in 1886 ranged from £2.5.0d to £10.10.0d. Shortly after this the "Chain Automaton" was offered alongside the gear-driven models. In 1894 the two mowers were redesignated "Patent Chain Automaton" and "Patent Gear Automaton" and as such continued to be made into the 20th century. Collectors should note that only early Ransomes, Sims & Head machines had exposed gearing, although many later machines have lost their gear covers.
AUTOMATON MINOR :
A lighter and cheaper version of the "Patent Automatons" made by Ransomes, Sims & Jefferies in the early 20th century. In 1915 this model was being offered in 6, 8, 10, 12, 14 & 16 inch sizes at prices ranging from £2.0.0d to £5.15.0d. These are distinguished from the contemporary "Automatons" by the rectangular, rather than rounded, name plate.
A powered roller mower utilising J.P. components made by Mitchells of Nottingham in the 1920s. One known example in an Essex collection has a Brough 2-stroke engine and a tubular steel handle (which makes the "Automo" one of the first mowers with this latter feature). In April 1926 "The Motor" magazine advertised the 16 inch "Automo" at a price of 40 guineas.
A product of "Lawn-Boy", this was a rotary machine introduced in the 1960s, available as either self-propelled or pushed, the 1963 price being £52 and £43.15.0d respectively. (See Evenrude).
A reciprocating knife mower made by Lloyds of Letchworth from 1937, This was a single-wheel machine with the engine driving the blades only. Originally using the Villiers Mar-vil engine, later post-War machines had J.A.P. engines. The 1948 price was £35 for the steel-tyred version and £36.10.0d for the pneumatic. For a time in the late-1930s ATCO was manufacturing an identical machine under the "Atcoscythe" name.
A late 19th century roller mower made by Follows & Bate for the Army & Navy Auxiliary stores at the rear of Howick Place, London. This was essentially a "Chain Tennis" machine.
B (Model) [Binch] :
A product of Wallis Binch, this was a 1930s sidewheel mower. In 1934 10 & 12 inch models were being offered at 24/-d and 26/-d respectively, grassboxes 5/-d extra.
A product of Qualcast, this was a sidewheel mower with a tubular steel handle and solid rubber tyres introduced in 1949.
These were mulcher mowers from ATCO made in the 1980s, the "B45" replacing the "B18" in 1984. Both had an 18 inch rotor.
BABY ALLEN SCYTHE :
See Allen Scythe.
A late 19th century pony mower by Hartley & Sugden of Halifax available in 30 and 36 inch cutting widths. A larger version of the "Osborne".
BANK RIDER :
The first ride-on mower from Hayter, the "Bank Rider" was designed for the professional and local authority market to deal with banks and sloping surfaces. It was introduced in 1974 and about 100 were made before this model was replaced by the "Frigate".
BAY STATE :
A late 19th century sidewheel mower made by the Blair Mfg. Co. of Springfield, Massachusetts, USA, available in 10, 12 & 14 inch sizes.
A late 19th century sidewheel mower made by the Rogers Iron Co. of Springfield, Ohio, a high-wheel version of the "Cruiser".
A range of gear-driven roller mowers made by the London firm of J.B. Brown in the 1860s. These were available in sizes ranging from 10 to 42 inches (the larger sizes being for 2-man or horse operation) with prices in 1867 ranging from £3.10.0d for the very smallest machine to £28.10.0d for the largest. It is significant that in 1869 the machine was advertised as being "perfected" which might imply that the earlier machines were less than successful.
Sidewheel catalogue mowers from the inter-war period.
A late 19th century sidewheel machine by Barford & Perkins.
A late 1950s motor scythe marketed by G.A. Holt Ltd. of Kingston-on-Thames, this machine had a rotary cutting head and pneumatic tyres. In 1959 this machine sold for £39.10.0d.
A product of the Brentwood (Essex) firm of W.J. & C.T. Burgess in the 1920s, the "Bee" was a powered roller mower with the engine attached directly to the cutting cylinder which acted as a flywheel. Available in widths of 16 and 22 inches, the "Bee" sold for £49.10.0d and £55 respectively in 1922.
An American 1950s powered sidewheel mower made by the Eclipse Lawn Mower Co. This was an 18 inch mower with a 2hp. Briggs & Stratton engine.
A late 19th century ball-bearing sidewheel mower marketed by the Supplee Hardware Co. of Philadelphia, USA, this was available in 12, 14, 16 & 18 inch sizes. NOTE: In 1889 Supplee were sales agents for J. Braun.
A late 19th century sidewheel mower made by the Supplee Hardware Co. of Philadelphia, USA.
BENTS CUTTER :
One example of an early 20th century bents cutter by Ransomes, Sims & Jefferies exists in an Essex collection. This was a manual roller machine with a large diameter cutting cylinder and scythe-like blades for dealing with rushes and long coarse grasses (known as "bents"). By 1915 this was being offered in one cutting width (24 inches) at a price of
A late 19th century sidewheel mower made by Dille & Anderson of Richmond, Indiana, USA. Available in five sizes. NOTE: "Best" was also a name used by American retailers such as Sears, Roebuck & Co.
I am informed by a Club member that a British (?) sidewheel mower has these initials cast into the wheels. This has subsequently been identified as a catalogue mower by Follows & Bate.
Sidewheel mower, probably a catalogue mower version of the Coldwell Gem, dating from early 1900s.
A product of H.R. Nash, this was a 14 inch rotary long grass cutter with a 34cc engine, c1963.
A late 19th century sidewheel mower made by the Blair Mfg. Co. of Springfield, Massachusetts, USA.
A product of Ransomes, this was an electric powered mower intended for fine turf cutting, but did not achieve much popularity (1940s/50s).
A product of Shanks, late 19th century, this was a pretty sidewheel machine available in 6 to 16 inch sizes with prices in 1892 ranging from 27/6d to 65/-d (grass box extra). The grass box had the side panels painted with a floral design.
BRITISH BINCH :
See Binch (Wallis).
An early 20th century product of Shanks which continued in production until 1939, this was a conventional sidewheel mower first introduced around 1900. By 1939 it was being offered in 10, 12, 14, & 16 inch sizes at prices ranging from £2.6.6d to £2.18.6d (grass box, delivery plate, and an extra long handle as optional extras). Like many of Shanks mowers, the colour scheme was cherry red with dark green wheel hubs. Superseded by the "New Britisher".
The name given to a motorised ride-on flail mower and general purpose garden tractor designed in the 1970s for large grassed areas. Made by Edward Thomas & Co. of Oswestry.
One of the many American sidewheel mowers first introduced into the UK in the 1870s and 1880s. The manufacturers could be either Mast, Foos & Co. or the Foos Mfg. Co. The "Buckeye Junior" was made in 10, 12, & 14 inch sizes and the "Buckeye Senior" in 10, 12, 14, 16 & 18 inch sizes. The London agents were Frederick Orme & Co., Holborn Viaduct.
A 1950s product of Shanks, this was a manual roller mower designed primarily for the overseas market. It was of 24 inch width and had a 7-bladed cutting cylinder. A draw rope with a handle was supplied with the machine, making it one of the last mowers to be so fitted.
A product of the Ideal Power Lawnmower Co., this was a gang mower for golf fairways in production in 1931.
A motor scythe and scrub cutter with a rotary cutting disc marketed in the 1950/60s by Farmfitters Ltd. of Gerards Cross. This had spoked wheels and a one-piece cutter made of tempered steel. Originally a 'T' handle was fitted but this was later replaced by a two-part tubular steel handle. Similarly the original Vincent engines gave way to more modern power plants. In 1963 the 18 inch machine sold for £52.10.0d
CADET [Allen] :
A product of Allen of Oxford, this was a 1960s domestic rotary mower available with either a 120cc or 150cc engine.
CADET [Greens] :
A product of Greens from the 1950s, this was a sidewheel mower with a wedge-shaped tubular steel handle. Roller versions were the "Monitor" and the "Zephyr".
CALEDONIA [Shanks] :
A product of Shanks late 19th century, this was a manual chain-driven roller mower produced in a variety of sizes. The "Special Caledonia" was a fine-turf variant designed for golf greens.
A gear-driven roller mower marketed by A. Ballach & Sons of Leith in the late 19th century.
CAPITOL [Grantite State] :
A lawn trimmer and edger with a 6 inch cutting cylinder, originally made by the Secrest Mfg. Co. of Cleveland, Ohio, USA, c1900, and later by the Granite State Mowing Machine Co. who appear to have bought out Secrest around 1908. The machine was asymmetrical, with one drive wheel only (on the right-hand side).
CAPITOL [Sweden] :
An early 20th century Swedish sidewheel machine with a wooden "T"-handle and trailing wooden roller. One example in an Essex collection has an 8 inch cut; the original colour scheme being dark green and orange. Although this machine was manufactured in Sweden its similarity to the "Capitol" trimmer and edger referred to below makes it likely that it was a product of the same company but made in Sweden to avoid unfavourable import duties.
CATALOGUE MOWERS :
A self-propelled domestic rotary mower by Allen of Oxford, c1965, employing a 147cc Briggs & Stratton engine.
A Sheffield made sidewheel mower c.1932. This mower was offered by the cigarette firm Godfrey Phillips for 395 coupons (grassbox 100 coupons extra). It is possible that the manufacturers were Qualcast, although this is to be confirmed.
A product of Suffolk, this was rotary mower which replaced the "Polo" in 1959 and which was made until 1963 when it was itself replaced by the "Galaxy". In the 1961/2 season the "Centaur" with its 18 inch cut and Clinton 3 hp. 4-stroke engine sold for £29.8.0d. This was identical in all respects to the Qualcast "Rotacut" Mk. IV.
CENTENARY [Greens] :
A 1930s product of Greens, this was a low-cost manual roller mower available in 12 inch width only. The price in 1935 was £3.3.0d with grass box.
CENTENARY [Ransomes] :
A range of manual roller mowers with plated parts made by Ransomes, Sims & Jefferies introduced in 1932 to celebrate the firm's 100 years of mower production.
CENTURY [Eclipes] :
An American sidewheel mower similar to the "Lady" made by the Eclipse Lawn Mower Co., c. 1937.
CENTURY [Reading Hardware] :
An American sidewheel mower, c1906, made by the Reading Hardware Co. of Reading, Pennsylvania, USA.
A range of Ransomes roller mowers produced over a long period designed for fine turf surfaces such as golf courses and tennis courts. The Mk.1 Certes was a manual roller mower introduced around 1930. By contrast the "Super Certes" of the 1990s was a powered machine fitted with a Kubota 130 engine.
CHAIN AUTOMATON :
CHAIN TENNIS :
See "Tennis" (Follows & Bate).
A product of F. Slaymaker & Co. Ltd. London, N.7 c1950.
A range of rotary rough-grass mowers by Allen of Oxford in the 1960s/70s, designed for the professional market.
CHAMPION [Allen] :
A product of John Allen, this was a range of rotary motor scythes introduced in 1962. A top-of-the-range machine, this had three forward speeds and reverse. By 1964 the 24 inch model sold for £140. A larger version of the Allen "Sickle".
CHAMPION [Gamages] :
A range of mowers retailed by the Holborn (London) firm of Gamages. These were made by a variety of manufacturers, some machines being identical to those marketed by Millard Bros. and probably made by the F & N Lawn Mower Co of Richmond, Indiana, U.S.A. (eg Gamages "Improved Champion" of 1911 was identical to the Millard "Milbro"). Later, between the World Wars, Gamages "Champions" and "Improved Champions" were made by the Derwent Iron Foundry (Qualcast) and the Suffolk Iron Foundry.
An early 20th century sidewheel mower made by the Philadelphia Lawn Mower Co. Available in 10, 12, 14 & 16 inch sizes prices in 1910 ranged from £1.13.0d to £2.14.0d. - grass box extra.
CHARTER OAK :
An American gear-driven mower made by Hills, c1890 with "Archimedean"- type blades. Instead of a rear roller this mower had two inside-frame rear-mounted driving rolls (making it a hybrid machine halfway between a roller and a sidewheel mower) . It was advertised in 10, 13, 15 & 18 inch widths.
A manual reciprocating-knife mower invented by C.W. Cheney of Athol, Massachusetts, USA and manufactured by Mather and Todd c1877. This was a "T"-handled machine with iron wheels, the knives being driven by a double crank motion as the machine was pushed along. To describe this as a Victorian "Allen Scythe" (which it somewhat resembled) would not be wide of the mark.
CHEVRON [Flymo] :
A product of Flymo, this was a range of wheeled mains electric rotary mowers introduced in 1986. Petrol-engined versions were available from 1987.
CHEVRON [Victa] :
A product of Victa, this was an 18 inch rotary mower imported into the UK in the mid-1970s.
A late 19th century American mower imported by Lloyd Lawrence & Co (later Lloyd's of Letchworth), this was available in sizes from 10 to 16 inches. Advertising stated that "the cylinder can be removed without taking the frame apart, which is a point never before accomplished".
A large sidewheel mower with horse attachment, made by the Champion Mfg. Co. of Richmond, Indiana, USA.
A product of Picksley, Sims & Co. of Manchester. This was a late 19th century sidewheel machine made in sizes from 10 to 16 inches. A conventional "T"-handled mower.
A small sidewheel mower, c1899, made by the Philadelphia Lawn Mower Co., this had large curved steel blades, which were a feature of many of this company's mowers. It was offered in 10, 12, & 14 inch sizes.
A 1970s product of Wolseley, this was heavy-duty rotary motor scythe with hydraulic transmission and large pneumatic wheels. It had a 4-stroke engine with recoil start.
An American sidewheel mower, c1900, imported by Frederick Stout & Co. of Cleveland Square, Liverpool. Available in 10, 12 & 14 inch sizes with prices ranging from 15/-d to 17/-d.
The first machine made by Follows & Bate of Manchester, the 1869 "Climax" was the world's first sidewheel mower, dispensing with the heavy land roller; a design which was to prove popular with small lawn owners until the introduction of small electric machines such as the Flymo in the 1950s & 1960s. With its trailing grass box the "Climax" was available in 6, 7, 8 & 10 inch sizes and prices in 1870 ranged from 25/-d to 63/-d. The original patent was No. 964 dated 3 March 1869. Various models of "Climax" continued to be made until the 1930s when the mower was virtually identical to the company's "Magic". One of these late-model "Climax" bears the patent number 379482.
CLIPPER [Chadborn & Coldwell] :
A product of Chadborn & Coldwell, this was an American-made sidewheel mower of conventional design, c1885. Superseded by the "New Clipper" from the same company.
CLIPPER [Clipper Lawn Mower] :
A late 19th century 12 inch cut sidewheel reciprocating mower made in the USA. The knives worked off an eccentric running between the two wheels to give a very fine cut. One example is in the agricultural museum at Cayuga, New York State. This was made by the Clipper Lawn Mower Co. of Norristown, Pennsylvania (1895-1904) and Dixon, Illinois (1904-1940s).
CLIPPER [Emery] :
A product of A.J. Emery of Halesowen (Birmingham), made immediately before and after World War 2. This was a powered roller mower not unlike contemporary ATCO machines and was marketed in two widths, 14 & 17 inch. In both cases a JAP 2A engine was used. A V-shaped cutting cylinder was fitted, and in addition to the hand clutch to the land roller a foot clutch operated the blades.
CLIPPER [Greens] :
A product of Greens in the late 1930s, this was a conventional manual sidewheel mower with a wooden T-handle which sold for 25/-d in 1939.
An early 20th century American sidewheel mower by Coldwell imported into the UK c1905 and retailed by J.C. Plimpton & Co. of Liverpool. An example is to be seen in the Milton Keynes Museum. A sidewheel mower of this name was made by the (US ?) firm of Haycraft but it is not known if the Milton Keynes example originated with this company.
A product of ATCO, this was a powered fine turf mower with a 10-blade cutting cylinder, first introduced in 1983.
Australian home-produced sidewheel mower (1940s) with pressed steel wheels.
A child's toy mower possibly from the 1950s. A green-painted toy grassbox measuring approximately 5.25" x 2.5" x 3" is in the ownership of a Club member. No other details available.
COEUR (The) :
("The Heart") An American-made 4-blade sidewheel mower made in 10, 12, and 14-inch sizes marketed by the Quincaillerie LaFosse, Brussels c1930.
An American-built sidewheel mower made in the 1920s.
A product of Suffolk, this was a powered roller mower introduced in 1960 as a replacement for the "Pony", and supplemented by the "Super Colt" in 1968. These had four-stroke engines.
An American sidewheel mower, c1895, made by F.S. Anderson of Richmond, Indiana, USA.
A 1930s product of Shanks, this was a manual roller mower which was, by 1939, the cheapest of the Shanks range at £3.7.6d. It was then offered in 12 inch cut only.
A product of Qualcast, this was a powered sidewheel mower for long grass introduced in 1953.
COMMODORE [Atco] :
A product of ATCO introduced in 1983 as a replacement for the "De Luxe" series, this was a powered roller mower with a 114cc aluminium engine. It was made in 14, 17, and 20 inch sizes.
COMMODORE [Qualcast] :
A product of Qualcast in the 1960s.
A sidewheel machine marketed in western Europe c1920 in 19, 12, 14, & 16-inch sizes, probably an American import.
A product of Qualcast, this was a mains electric roller mower introduced in 1971 and which, in its various forms, proved very popular. Buyers had the option of either a front or rear grass box depending on the model bought. Still in production in the 1990s.
A product of Hayter, this was a professional roller mower with a 30 inch cutting width introduced in the late 1960s for parks and sports grounds The cutting cylinder was interchangeable with a rotary unit. It was replaced by the "Senator" in 1980.
A product of Ransomes, Sims & Jefferies, c1959, this was a manual sidewheel machine with inside-frame wheels, enclosed in a streamlined fairing giving it a very modern appearance. The grass box was of the trailed canvas type. The "Conquest" remained in production until 1975.
An early 20th century sidewheel machine supplied in 8, 10, 12, 14 and 16 inch sizes for 10/6d, 12/6d, 13/-, 14/-, and 15/6d respectively. The suppliers were William Cooper Ltd., 761 Old Kent Road, London SE.
COOPER PUTTING GREEN MOWER :
See Cooper Mfg. Co. above.
A sidewheel catalogue mower. No other details available.
A product of Ransomes this was a manual sidewheel mower c1927 available in 12, 15, 17 & 19 inch sizes from £8.0.0d to £11.10.0d, grass box and delivery plate extra.
A late 1950s product of Suffolk, this was a powered sidewheel mower designed for rough-grass areas originally designated the "Squire Corporation". By 1963 this mower, under its new shortened title, was selling for £29.18.6d (19 inch) making it cheaper than the "Antelope" and the "Sidewheeler".
A toy rotary mower in a member's collection bears the name Victa Corvette. It is not known if this was a product of the Victa company or an independent maker.
A small gear-driven roller mower made by Barnard, Bishop & Barnard in 1870. Available in 6, 8, & 10 inch sizes prices were £1.5.0d, £1.15.0d, and £2.5.0d. Advertised as "suitable for the very smallest gardens".
A mid-1950s product of Barford (Agricultural) Ltd., this was a reciprocating power scythe with a four-stroke Villiers engine. Similar to the Allen Scythe it can be distinguished from it by the vanes cast into the wheel hubs. In 1956 the "Councillor" sold at £89.10.0d.
COUNTESS ELECTRA :
A mains electric roller mower by Ransomes (see also "Electra") the "Countess Electra" was manufactured under British patent 268504 and Australian patent 2045/26, making it, in 1926, one of the world's first mains electric mowers.
A product of Shay, this was a 1960s self-propelled rotary mower powered by a 120cc engine. In 1960 18 and 20 inch models were being offered at the price of £39.10.0d and £58.0.0d respectively.
COUNTY [Rotoscythe] :
A product of Rotoscythe (Power Specialities Ltd.) ca, 1950, the "County" was an 18 inch rotary mower with four large diameter wheels which made it very suitable for rough ground. No grass box was provided.
COUNTY [Shay] :
A product of Shay, this was a development of the Rotoscythe machine after that firm had been taken over in 1952. Still retaining the 18 inch cut, the Shay product was of a more modern rectangular design with smaller wheels.
A product of Nettlefold & Sons, c1879, this was a gear-driven roller mower with an "Archimedean"-type cutting cylinder advertised in 8, 10, 13, 15 & 18 inch widths with prices in 1887 ranging from 2 to 6 guineas. Early machines had beautifully scrolled gear covers and handles.
A product of US makers F & N. Advertised as having "every bearing a ball bearing", the Crestlawn, which was a conventional sidewheel machine of the period, was shown as a "watermark" on the firm's stationery (April 1916).
A product of Follows & Bate, c1878 to c1902, this was a sidewheel mower of the type pioneered by this Manchester firm. It was available in both 8 inch and 10 inch cutting widths and in 1881 these sold at 55/-d and 70/-d respectively. Basically the "Croquet" was a smaller version of the company's "Anglo-American" mower.
A late 19th century sidewheel mower made by the Rogers Iron Co. of Springfield, Ohio, USA. A similar mower to the "Bayley".
A product of Ransomes, Sims & Jefferies, the was a manual sidewheel mower made in the 1930s.
CURTIS STAR :
See Curtis Cultivator Co.
A range of sidewheel mowers made by the German firm of Brill, 1920s/30s.
See Cylinder Components Ltd.
A 21 inch rotary mower produced by the Cooper Mfg. Co., USA and available in the UK from 1964, the British agents being B.A. Rolfed & Sons Ltd., Ramsey, Hampshire.
A product of Ransomes, Sims & Jefferies this was an 18 inch rotary mower with a hummock disc to protect the blades. Introduced in the late 1950s, the "Cyclone" was replaced by the "Typhoon" in 1961.
DAISY [Hills] :
A product of the American firm Hills, this was a sidewheel mower c1889 with "Archimedean"-type blades. Two iron guide wheels were set in front of the cutting cylinder.
DAISY [USA] :
An American sidewheel mower available in 10, 12, 14, & 16 inch sizes. Prices in 1904 ranged from 15/-d to £1.3.6d when sold by Newbury ironmonger Robert Long. A similar mower to the "Philadelphia" but with 7 inch drive wheels.
A sidewheel mower patented in November 1897 by the Stevens Manufacturing Co. of Canada. This was a machine driven by two large spoked drive wheels with four small iron wheels, one at each corner, in place of the usual wooden roller.
A surviving mower name badge bears the name "Daventry", together with the picture of an old-fashioned radio speaker (Daventry being one of the very early radio stations in the UK).
DE LUXE [Atco, 1930s] :
A lightweight powered machine made by ATCO in the early to mid 1930s, these mowers are readily identified by the combined petrol tank and tool box of triangular cross-section mounted between the handles. The "De Luxe" was ATCO's first steel mower.
DE LUXE [Atco, 1960s] :
A product of ATCO, this was a series of powered roller mowers introduced in 1969 and consisting of the B12, B14, B17 and B20 (the numerals indicating the cutting width). Except for the B12, which soldiered on until 1990, these were replaced by the "Commodore" in 1983. Normally petrol-engined, they were also marketed with battery electric motors.
DE LUXE [Webb] :
The first product of H.C. Webb Ltd. in 1929. This was a revolutionary mower as it utilised pressed steel, which then gradually replaced cast iron as the basic material for mower frames.
A manual roller mower by Greens, the "Defiance" sold at £2.15.0d in 1939.
An American sidewheel mower made by the Philadelphia Lawn Mower Co. This had a four-bladed cutting cylinder and was available in 10, 12, 14, & 16 inch sizes.
DIAMOND [Dille & McGuire] :
A late 19th century sidewheel mower made by Dille & McGuire of Richmond, Indiana, USA. Advertised as "the only enclosed cutter mower having a steel shaft". Available in 10 to 18 inch sizes in 1895.
DIAMOND [Whitman & Barnes] :
The London office of Whitman & Barnes were advertising an American sidewheel mower bearing this name as well as their own in 1902. Although the parent company from Chicago seem to have made mowers in their own right, this may have been the Dille & McGuire machine referred to above, as the two mowers were very similar.
A catalogue mower, c1910, made by Shanks for the Belfast/Dublin firm of nurserymen, Alex Dickson & Sons. This was a sidewheel mower available in 10, 12, 14, & 16 inch sizes, bearing a plate on the handle which read "Dicksons Seedsmen, Belfast & Dublin". Prices ranged from £1.6.6d to £1.18.0d.
The last mower to be made under the Webb name, this was a machine made 1990/91.
Several firms produced mowers for donkey haulage. One example was the range of 20, 22 & 14 inch mowers made by Ransomes, Sims & Jefferies described in that firm's 1915 catalogue as the "Donkey" mower. Prices then ranged from £13.0.0d to £16.0.0d.
A product of Shanks (1930s/50s), the "Dragon" was a large powered roller mower comparable with the Dennis 'Z' and weighing up to 9 cwt. In 1939 it was available in 30 and 36 inch sizes, utilising a J.A.P. 4-stroke engine, and selling at £98.0.0d and £115.0.0d respectively. The "Dragon" was still being offered in the 1950s. In some models a Douglas engine was used.
A product of Shanks (1930s/50s), this was a powered roller mower halfway between the smaller "Firefly" and the larger "Dragon". In 1939 the "Dragonfly" was being offered in 20 and 24 inch sizes at £70.0.0d and £80.0.0d respectively. A J.A.P. 4-stroke engine was fitted. By 1950 only the 24 inch model was being offered. A trailing seat was an optional extra.
A bowling green mower by Shanks (1930s/50s), this was a manual roller machine with a 10-bladed cutting cylinder. In 1939 the "Drake" was being offered in 16 and 18 inch sizes at £15.15.0d and £16.10.0d respectively. By 1950 only the 18 inch version was being offered. This was a slightly altered design, the side handles to the grass box having disappeared, and the main handles being braced by 'X' struts.
Triple and quintuple gang mowers manufactured by F.Mitchell Ltd. of Nottingham (c.1936), available in 24 and 30 inch sizes.
A late 19th century combined mower and trimmer made by Dille & Anderson of Richmond, Indiana, USA. This was an asymmetrical machine with the driving wheel on the left and a small "idle" wheel on the right. In a tight corner the handle could be turned through 90 degrees so that it was in front of the cutting cylinder, thus allowing trimming up to edges. The "Duplex" was available in 7, 9 & 11 inch cutting widths.
A product of Husqvarna, this was a Swedish manual sidewheel machine made from the 1930s. By 1968 the "Dux Major" sidewheel mower with tubular steel handles was available in 12 and 14 inch sizes at £6.15.0d and £7.0.0d respectively (grass box extra). The "Dux Minor" was a smaller version.
A product of Flymo, this mains electric rotary was the first hover mower to be fitted with a grass box, c1978.
E (Model) :
A range of popular sidewheel mowers by Qualcast from the late 1920s and available in 8, 10, 12 and 14 inch sizes.
A Ransomes, Cushman & Ryan battery-powered gang mower from the 1990s made specifically for golf courses.
A product of Qualcast, the "E1" was a sidewheel mower first produced in the late 1930s and which, with a tubular steel handle, continued in production until the late 1950s.
EAGLE [Hayter] :
A product of Hayter, this was a 53 inch rotary mower designed for the professional and local authority market as a larger version of the "Frigate", remaining in production until 1983.
EAGLE [Philadelphia] :
A 30, 35, 40 & 42 inch pony mower made by the Philadelphia Lawn Mower Co. c1910.
EAGLE [Shanks] :
A product of Shanks, the "Eagle" was a manual roller mower made in the 1930s. By 1939 the "Eagle" was being offered in 10, 12, 14 & 16 inch sizes at prices ranging from £7.2.6d to £9.12.6d.
An open-frame ride-on mower designed by E.F. Ranger (Ferring) Ltd. c1953 and later manufactured by the British Anzani Eng. Co. of Maidstone. The colour was blue and 16 & 24 inch models were available. Developed into the "Lawnrider" c1958. Later 14 inch machines by British Anzani, but bearing no resemblance to the original Ranger machine, also bore the name "Easimow".
A late 19th century American sidewheel mower made by the Blair Mfg. Co. of Springfield, Massachusetts, USA. The mower appears to have had scythe-like steel blades as on the British "Flexa" and to some models a "T"-handle was fitted with the cross-piece of the "T" held above the main shaft by a "U-shaped iron bracket. The "Easy" was available in sizes from 10 to 40 inches. One of the larger machines was exhibited at the Stourbridge Show in 1881 and gave rise to the following comment - "A very flimsily constructed machine which will never come into general use". In 1888 an improved model the "New Easy" was being advertised. One agent handling these machines was Holt & Willetts of Brierley Hill. Later this was superseded by the "Newer Easy". First made in 1879 "Easy" mowers were still being listed in US catalogues after World War 2.
EASY CUT :
A sidewheel mower marketed by Thomas Gunn Ltd. in the late-1920s. As this mower resembled other imports such as the "Capitol" it was probably of European or American manufacture. In 1929 two versions were offered, the 10 inch at 21/6d and the 12 inch at 22/6d.
EASY RUN :
An American sidewheel mower imported by John Shaw & Sons Ltd. of Wolverhampton c1905.
ECLIPSE [Boulton & Paul] :
A range of gear-driven roller mowers by Boulton & Paul of Norwich in the 1870s. By 1874 three models were available (i) 6, 7, 8, & 9 inch, (ii) 12, 14 & 16 inch, and (iii) 18, 21 & 24 inch; the last two sizes having a draw-rope for manual haulage. Prices then ranged from £1.5.0d for the very smallest to £8.10.0d for the largest.
ECLIPSE [Small] :
A mower retailed by Small of Forfar, Scotland. This was a gear-driven roller mower of conventional design for the period (1885) available in 10 to 22 inch cutting widths. Prices ranged from £3.0.0d to £7.10.0d (grass box extra).
EDEN [Foreign] :
An Essex collection has a 12 inch sidewheel mower (1920s/30s) marked "Foreign" on one wheel and "Eden" on the other. Manufacturer unknown.
EDEN [Suffolk] :
A product of Suffolk Iron Foundries c1938, this was a manual roller mower of advanced design and would have sold in greater numbers had not World War 2 intervened.
An American sidewheel catalogue mower marketed by Fletcher, Sons & Udall of Edgbaston Street, Birmingham, c1906.
EDGE CUTTER :
Many firms produced edge cutters to replace shears for trimming lawn edges. Ransomes, Sims & Jefferies patented such a machine in the 1880s. This utilised a ribbed land roll which drove, on its right-hand side, a four-bladed cutter moving in the vertical plane. This machine won a silver medal at the Inventions Exhibition of 1885. At that time the edge cutter sold for 35/-d. An up-dated version of this with a five-bladed cutter and smooth roller was still being offered in the firm's 1915 catalogue. This later model was also made by Lloyds of Letchworth, presumably under licence from Ransomes.
An early 20th century high-wheel sidewheel mower made by the Philadelphia Lawn Mower Co. Available in 15, 17, 19, & 21 inch sizes, prices in 1910 ranged from £5.5.0d to £7.10.0d (grass box extra).
Claimed to be the world's first mains electric roller mower, the "Electra" was a product of Ransomes, Sims & Jefferies in 1926. The 14 inch machine with its 1hp. electric motor cost £27.10.0d in 1935. In many respects the "Electra" resembled Ransomes' more conventional machines but with the addition of the motor unit. A 20 inch "Electra" model was advertised after World War 2 for use on bowling greens. See also "Countess Electra".
A product of Shanks in the late 1920s/early 1930s, this was a roller mower powered by a Villiers two-stroke engine.
A product of ATCO (Suffolk), this was a manual sidewheel mower made in both 14 and 16 inch sizes, c1980.
A rotary mower by Mountfield from the 1980s. Also made with a 240 volt electric motor.
A rotary mower by Mountfield from the 1980s.
EMPIRE MAJOR :
See "Empire" [Ransomes].
EMPIRE [Millard] :
An early 20th century American mower imported into Gt Britain by Millard Bros. In 1904 this was available in 8 to 16 inch sizes at prices ranging from 13/6d to 19/11d.
EMPIRE [Ransomes] :
A product of Ransomes, this was a sidewheel mower introduced in 1903 and available in 10, 12, 14 & 16 inch sizes. The "Empire Major" introduced at the same time was a high-wheel machine for golf links etc. Prices for the two machines ranged, in February 1903, from £3.0.0d to £7.10.0d (grass boxes extra). See also "New Empire".
EMPRESS [Braby] :
A sidewheel mower similar to the "Woodyatt" offered for sale by F. Braby & Co. Ltd., importers of several American and Canadian mowers in the early 1900s. With its open spoked wheels and trailed roll, this does not appear to be the machine referred to above.
EMPRESS [Carr & Hobson] :
A sidewheel mower advertised as "the new and improved American lawn mower for 1887". This was unusual for a sidewheel machine of that date inasmuch as it had a metal "X" handle and no front or rear rollers nor guide wheels appear to have been fitted. Available in 12, 14 & 16 inch sizes retail prices for 1887 ranged from 42/6d to 50/-d. There was no grass box offered. In that year agents in Great Britain were being sought; the Dublin agents being Thomas McKenzie & Sons, well-known importers of American mowers. Manufacturers may have been Carr & Hobson.
EMPRESS [Mountfield] :
A rotary mower by Mountfield from the 1980s.
Produced by Alexander Shanks and Son Ltd. c. 1950, this was a 12" roller driven hand mower similar to the Silver Comet. Intended to boost the Company's ailing lawnmower division, production lasted less than two years. Together with the Hawk 2 sidewheel mower, the Emu was the last hand mower Shanks manufactured.
A product of ATCO introduced in 1995, this was a powered roller mower for medium size lawns.
A late 19th century sidewheel mower made by the Enterprise Mfg. Co. of Philadelphia, USA. In 1890 these were available in 9, 11, 13, & 15 inch sizes at 45/-d, 55/-d, 65/-d, and 75/-d respectively. Grass boxes were available at 5/-d for the 9 and 11 inch models and 7/6 for the 13 and 15 inch models. Smaller machines with 9 and 10 inch cut were also offered.
ETON [Rotoscyhte] :
A 15 inch rotary mower made by Power Specialities Ltd. (Rotoscythe) introduced in 1937. Not to be confused with the later "Eton" made by J.E. Shay, although the two machines are "related".
ETON [Shay] :
A product of J.E. Shay (Rotoscythe), this was a 14 inch version of that firm's "Windsor" c1955.
A sidewheel mower manufactured by Taylor-Forbes. The mower was available in 14" cut with four blades on the cylinder. The model was available at least as early as 1939 (priced at $5.75 in a catalogue) and as late as 1949 (priced at $14.95 in a catalogue). The 1939 catalogue refers to the mower as the "Even-Cut".
EXCELSIOR [Chadborn & Coldwell] :
Late 19th and early 20th century gear-driven mowers made by the American firm Chadborn & Coldwell who also made the "New Excelsior" machines which had an enclosed gear train. In 1886 a wide range of these American machines were being offered for sale in Gt. Britain. These included 6 inch to 20 inch machines at prices varying between £1.10.0d and £7.10.0d. By 1910 the 14 inch roller mower was retailing at £4.10.0d. Pony mowers were also made. On some imported "Excelsior" mowers the words "London Excelsior" appear on the grass box.
EXCELSIOR [Excelsior Motor Cycles] :
A product of Excelsior Motor Cycles, this was a powered roller mower from the 1940s which had a twin-port two-stroke engine. Very few of these machines are known to now exist.
EXPRESS CHAIN :
A roller mower of the "Silens Messor" type made for the Civil Service Supply Association c1905, an 8 inch example of which was formerly on display at the museum at Trerice, Cornwall.
Trailed gang mower produced by Dennis, comprising three or five 24 inch units with cutting width of 68 and 108 inches respectively. Appears to have been replaced by the "Guildford Minor" gang mowers in the early 1960s.
F & N :
A range of late 19th century sidewheel mowers made by the American F & N Lawn Mower Co. This included a high-grass machine. The name "Fenden" was also used as the firm's cable address.
A rubber tyred manual sidewheel mower produced under the Folbate name by Qualcast post-1945.
A 1920s/50s variant of the "Pennsylvania" sidewheel mower by Lloyds, the "Fairway" was a rough and long grass machine advertised as being particularly suitable for golf courses; available in 13, 15 & 17 inch sizes. See also "Kut-Ruf".
A product of Samuelson, c1888, this was a sidewheel mower with a trailing grass box available in 9, 12, & 15 inch sizes with prices in that year ranging from £2.2.0d to £3.10.0d. A similar mower to the "Villa".
A product of Follows & Bate, this was a 12 inch manual roller mower c1938, when it sold for £2.8.6d. The "Falcon" (under the Folbate name) continued to be made after Follows & Bate were taken over by Qualcast in 1938. When the Folbate name disappeared in 1966 the "Falcon" continued on as the Suffolk "Falcon" until 1972. Several catalogue mowers (eg "Dolson", "Horley") were "Falcons" sold under the retailer's name.
A late 19th century edger and trimmer made by Dille & Anderson of Richmond, Indiana, USA. This consisted of three long reciprocating knife blades with following iron wheels, operated by a pair of long handles. The 8 inch long blades had a 5 inch width of cut. A two-bladed version was also available.
FAVORITE [Bookwalter] :
A range of late 19th mowers made by J.W. Bookwalter of Springfield, Ohio, USA. Gear-driven roller mowers (ca. 1878) or robust-looking sidewheel mowers were offered. The colour scheme for the latter was black and gold.
FAVORITE [Samuelson] :
A product (note spelling) of Samuelson, this was a manual sidewheel machine similar to the "Villa", c1880. Available in 8, 10, 12, & 14 inch sizes, prices in 1888 ranged from £2.10.0d to £5.5.0d, the smallest model having a "T"-handle and the others having twin handles unless requested by the purchaser. The grass box was originally of a peculiar curved design resembling a baby's crib.
An American sidewheel mower marketed by the Brussels agent John H Graham c1920.
See "F & N".
A product of Shanks made both before and after World War 2, the "Firefly" was a powered roller mower. In 1939 it was being offered in 14, 16, 20 & 28 inch sizes at prices ranging from £18.10.0d to £77.10.0d. In the smaller sizes a 2-stroke Villiers engine was fitted but in the two larger machines a J.A.P. 4-stroke engine was used (the 20 inch mower retaining the Villiers as an option for the purchaser).
A French (?) 1950s/60s sidewheel mower with a tubular metal handle. The editor unearthed one of these from a derelict cottage in France. No other details.
A British-made sidewheel mower c.1920. One example in an Essex collection has a 9.5 inch cut (probably marketed as a 10 inch). Original colour scheme appears to have been gold.
A manual sidewheel mower introduced in 1932 and continued post-war. This utilised thin steel blades which lay horizontally (rather than vertically) on the cutting cylinder and which acted against a flexible shear-blade. One 18 inch example bears the serial no. Z18533. Originally marketed by John Hansen F.R.H.S., Astor House, Aldwych, London, the company under the name of The Flexa Lawn Mower Co. Ltd. was based at Onslow Hall House, Guildford Road, Woking and was a subsidiary of Christian Hansen. In 1939 the "Flexa" was being sold in 12, 14, 16 & 18 inch sizes at prices ranging from £3.15.0d to £4.10.0d. The colour scheme was gilt with bright stainless steel blades. At that time a canvas grass collector was offered, although some models were sold with an aluminium grass box with wooden sides from the back of which a chain connected with the wooden 'T' handle. The Company were also the makers of the interesting "Astor Grass Clipper" a hand-operated reciprocating-knife lawn edger c1950., which had its origins in the "Crab" hedge clipper marketed by John Hansen in the 1920s. By the 1980s "Flexa" mowers were being made for the Wilkinson Sword Co.
An American sidewheel mower, c1890, made in Springfield, Ohio, USA, by Mast, Foos & Co. (or possibly by G.S. Foos).
A product of Greens, c1956, in their "Red Label" range which included later models of the "Zephyr" and the "Monitor". This was a sidewheel mower with a tubular steel handle - a successor to the "Tutor". Available in a 12 inch cut only, the "Flyer" sold for £5.6.8d in 1956 (grass box extra).
A product of Greens c1956, this was a powered roller mower with an 80cc J.A.P. engine. Available in 14 inch cut only, the "Flyweight" sold in 1956 for £31.18.11d.
See Follows & Bate.
FOUR IN HAND :
A 1960s product of Shay, this was a conventional powered roller mower with a 75cc Villiers 4-stroke engine. In 1960 this 14 inch machine retailed at £40.6.6.d.
FOUR SEASONS SCRUB CUTTER :
See "Motor Sickle".
FOUR STAR :
A product of Victa, this was a 1960s rotary mower with a 125cc engine. The 18 inch model retailed for £45.0.0d in 1963 (grass catcher extra).
A sidewheel catalogue mower by Coldwell.
A product of Hayter, this was a 36 inch rotary designed for the professional and local authority market as a replacement for the "Bank Rider". It was introduced in 1976 and production ceased in 1980.
G (Model) :
A product of Qualcast c.1927, this was a high-wheel sidewheel mower available in 10, 12, 14 & 16 inch sizes.
A product of Suffolk, this was rotary mower which replaced the "Centaur" in 1963.
GARDEN CITY :
A product of Lloyds of Letchworth, this manual sidewheel machine was introduced in 1923, being named after Welwyn Garden City. It was made in 10, 12, 14, and 16 inch sizes and remained in production until the mid 1930s. In appearance it was a typical sidewheel mower of the period. In 1929 prices ranged from 45/-d. The slogan for the machine read "They cut cleanly and decisively - no "yanking" to and fro needed, tho' grass be wet and tangled".
A product of Ransomes, Sims & Jefferies c1950, this was a powered sidewheel mower with an 18 inch cutting width and a 98cc Villiers engine. Replaced by the "Antelope" in 1956.
GEM [Coldwell] :
Sidewheel mower made by Chadborn & Coldwell in USA in early 1900s. Advertisement for mower seen in The Ironmongers' Chronicle, 11 May 1907. Examples of this machine exist as catalogue mowers with identical design but different name, including Blackfriars.
GEM [Nutt] :
A 10 inch manual roller model in the "Hayn" range manufactured by Nutt Eng. Co. Ltd. in the 1950s/60s. A 12 inch version was the "Super".
An early 20th century sidewheel mower made by the Philadelphia Lawn Mower Co., this was available in 10, 12, 14 & 16 inch sizes with prices in 1910 ranging from £1.0.0d to £1.9.0d.
A late 19th century American sidewheel mower made by the Supplee Hardware Co. of Philadelphia, Pennsylvania, USA.
GLOBE [Mast, Foos & Co] :
A late 19th century American sidewheel mower of conventional design for the period. Probable manufacturers were Mast, Foos & Co.
GLOBE [Ransomes] :
See "World" [Ransomes].
GO AHEAD :
A product of Follows & Bate, c1902, possibly similar to the "Roller".
A range of mowers made by Barford & Perkins, late 19th to early 20th century. It was on these machines that the manufacturers first (1902) placed the Wansbrough Patent method of altering the height of cut. Introduced in 1886, by 1890 these chain-driven roller mowers were available in sizes from 8 to 21 inches at prices ranging from £2.10.0d to £9.0.0d. Larger 24, 27, 30 and 36 inch machines (included in 1894 advertisements) were sold for donkey, pony or horse haulage.
GOLDEN EAGLE :
A 1930s product of Shanks, this was a manual roller mower with a ribbed roller. In 1939 it was being offered in 12 and 14 inch sizes at £8.5.0d and £8.15.0d respectively.
GOLF LYNX :
A product of Shanks designed for fine turf areas such as golf courses, this was a manual roller mower. In 1939 it was being offered in 14 and 16 inch sizes at £15.0.0d and £16.0.0d respectively.
A gear-driven pony mower by Follows & Bate, late 19th century until at least 1909.
A Suffolk collection has a 12 inch 1920s/30s sidewheel mower marked "The Gordon" and "British (TWT)". The colour scheme of red and gold may be original. The retailers would have been Timothy White Taylors, the hardware and pharmaceutical chain who used the name Gordon for a range of garden tools which included sidewheel and roller mowers, line markers, rollers etc. Makers unknown.
A product of Shaw, this was a Burgess-engined roller mower with water cooling, the cutting cylinder acting as the flywheel. One example was restored by Andrew Hall in 1993.
A product of Philadelphia c1920 this was a typical American sidewheel mower of the period. The colour scheme appears to have been silver with gold wheel rims, the words " "Graham" All Steel" appearing in yellow letters on the black T-handle. The name probably relates to the firm's connection with the company mentioned below.
A product of Arundel Coulthard & Co., this was long-grass version of the "Presto" sidewheel mower, and in 1939 was available in 10, 12, 14, 16 & 18 inch sizes at prices (for cash) ranging from 31/4d to 37/6d.
A product of Wallis Binch c.1934, this was a manual roller mower available in a 12 inch cut, retailing at 57/6d.
A product of Tarpen Engineering, this was a 3-wheeled electric machine with small reciprocating knife blades, designed to cut rough grass and weeds. Introduced in the mid-1950s, the "Grassmaster" could be converted into the "Vergemaster" lawn edger at extra cost. Retail price in 1956 was £14.5.0d.
Australian powered cylinder mowers available in 14 and 16 inch sizes, c1940. The same company also made gang units at that time.
GRAY'S INN :
A Canadian-made high-wheel sidewheel mower marketed by the London firm of WBF & S Ltd., c1926.
A three-wheeled rotary mower designed for long-grass areas marketed by Farmfitters Ltd. in the 1960s. With its two large rear wheels and smaller front wheel, the "Grazier" was a larger version of the "Sexton". In 1962 it retailed for £10.0.0d.
GREAT AMERICAN :
A late 19th century sidewheel mower made by the Supplee Hardware Lawrence & Co. of Philadelphia, USA, and imported through Lloyd, Lawrence & Co. Offered concurrently with the "Pennsylvania" in the 1880s.
GREEN CLIPPER :
A product of Greens, this was a 10 inch sidewheel mower made in the 1930s; the price in 1938 being 25/-d (box extra).
A product of the Ideal Power Lawn Mower Co., USA c1930, this was a manual roller mower golf greens. A variant was the "New Power Greensmower".
A range of mowers by Greens including a sidewheel ball-bearing mower. By 1935 the sidewheel "Greenson" was available in 10, 12, 14 & 16 inch sizes at prices ranging from £2.7.6d to £3.0.0d. Patent runners, available as extras, allowed the machine overlap paths.
An American sidewheel mower made by the Thomas Mfg. Co. of Springfield, Ohio, USA, c1890. This was available in 14, 16, 18, & 20 inch sizes.
A sidewheel catalogue mower. No other details available.
A manual sidewheel mower made by Alex Harris of Leicester and selling for 10/6d in 1909.
GUILDFORD MINOR :
Trailed gang mower produced by Dennis, comprising three or five 24 inch units with cutting width of 68 and 108 inches respectively. Appears to have replaced the "Extracut" gang mowers in the early 1960s.
A range of mowers advertised by Boulton & Paul of Norwich in the 1870s. The smallest, "One-Guinea" machine, was a "T"-handled gear-driven roller mower of 6 inch cut, the "Two-Guinea" machine was singular with a 9 inch cut while "Three-Guinea" machines were available either as a 12 inch version of the smaller mowers or as a two handled machine.
H (Model) :
A 1930s product of Qualcast, these sidewheel mowers were available in 10, 12, 14 & 16 inch sizes. These had 9 inch driving wheels as opposed to the 10 inch in the Model "K".
H TYPE :
A product of Auto-Mower, c.1939, this was a Lister-engined 4-stroke mower available in 24 and 30 inch sizes selling in 1939 for £49 and £68 respectively.
A late-19th century edge-cutter by Greens, this had a wooden T-handle and a 6-blade star-wheel cutter. The price in 1897 was £1.10.0d.
A late 19th century American sidewheel mower made by the Hanika Iron Fence Co. of Springfield, Ohio, USA (firm established 1883).
A product of Hayter, this was a self-propelled roller-driven rotary from the 1970s.
HATTON GARDEN :
An American sidewheel catalogue mower imported by G & W Purser of Birmingham and London, c1906.
HAWK MAJOR :
HAWK [Hayter] :
A product of Hayter, this was a hand propelled rotary with a 12 inch cut introduced in the early 1970s. The "Hawk Major" was the 19 inch version.
HAWK [Shanks] :
A 1920s/30s product of Shanks. By 1939 this was the most expensive of that company's sidewheel machines at £2.13.6d for the 10 inch model, £2.16.9d for the 12 inch, and £3.1.6d for the 14 inch. Grass boxes, delivery plates, and longer handles were offered as optional extras.
A range of manual and powered mowers by Nutt of Cambridge, c1950/60s. By 1966 both powered cylinder and rotary mowers were being offered for sale under this name. Manual mowers were offered in two models, the "Gem" and the "Super", having a 10 inch and 12 inch cut respectively.
A range of powered rotary mowers made by Hayter for the smaller garden, the first "Hayterette" was made in 1957, and these were still being made into the 1990s. Original "Hayterettes" were red and silver, but hammered green, red and green, and dark green were used later.
A professional mower by Hayter which could be used with either a 26 inch rotary unit or a 30 inch cylinder, the "Haytermower" was first introduced in 1959.
A sidewheel mower by Pierce of Wexford (Eire) first introduced in 1928, made in 8-16 inch sizes. Superseded by the "Jewel" in 1938.
A product of Heli-Strand Tools, this was a rotary mower with a 20 inch cut introduced in the early 1960s. The engine could be lifted from the machine to power flexible-drive tools.
A late 19th century "high wheel" sidewheel mower made by the Blair Mfg. Co. Available in 14, 16, 18 & 20 inch sizes.
HIGH WHEEL [Chadborn & Coldwell] :
See "New Model" (Chadborn & Coldwell). NOTE: Several manufacturers made high-wheel machines as variants of existing models for use on long grass.
HIGH WHEEL [Greens] :
A variant of the "Silens Messor" designed for golf courses, c1912, similar to the Shanks "Triumph" and Ransomes "Ideal" machines.
A product of Hayter for the professional and local authority market, the "Highway" rotary with its 6 ft 6 in. cut was introduced in 1956.
A product of Hayter, this was a rotary mower with a split rear roller and plastic grass box introduced in 1982. Originally with a petrol engine driving the blades only, electric and self-propelled versions were added to the range in 1985.
HORLEY (The) :
Catalogue mowers retailed by Young's of Horley. The 12 inch roller mower sold for 47/-d in 1940, and the 10 inch sidewheel mower for 20/-d. The roller mower was probably a product of Folbate as it seems identical with their "Falcon".
HORSE POWER :
Several companies called their horse and pony mowers "horse power" mowers. One such mower was the 19th century Ransomes, Sims & Head pony mower circa. 1870. This was gear-driven machine with a rectangular grass box, the handles being stiffened by rods connecting with the frame of the machine. This mower continued to be made by Ransomes, Sims & Jefferies; 26, 30, 36, & 48 inch cutting widths being offered. By 1890 the 26 inch model had been dropped and a 42 inch model substituted. Prices then ranged from £20.0.0d to £30.0.0d The machine was still being offered in the firm's 1915 catalogue described as the "1913 Horse" mower.
HORSESHOE TANK MOWERS :
A generic name given by collectors to the range of powered roller mowers made by Ransomes, Sims & Jefferies in the 1930s, so-called because of the shape of the petrol tank. These mowers are the Marks V, VA (16 inch), VI, VII, VIIA (20 inch) and VIII (16 inch). Originally with Blackburn engines the later marks had Sturmey-Archer engines. The 16 inch machines had a total-wastage oil system.
A product of Flymo c1993, this was a mains electric rotary mower with the grass box integrated within the body and emptied the same way as a cylinder vacuum cleaner.
A range of rotary mowers by Hayter, these were introduced in 1987 and could be either pushed or self-propelled. Three cutting widths (16,18, & 21 inch) were available and electric starting was available on the larger models from 1989.
A slightly scaled-down version of the ATCO "Standard", available in 12 and 14 inch cutting width, made in the late 1920s and early 1930s.
A range of multiple gang mower units by Ransomes.
A product of Ransomes, Sims & Jefferies c1905. This was a horse-drawn mower made for undulating surfaces such as golf courses and employed the Hillman Patent method of raising and lowering the cutting unit. By 1915 this was offered in 32 and 36 inch sizes at £34.0.0d and £36.0.0d respectively.
IMPERIAL [Coldwell] :
A product of Coldwell, c1900, this was a double-ratchet sidewheel mower with a 6-bladed cutting cylinder available in sizes ranging from 10 to 20 inches, with prices from £2.15.0d to £5.5.0d -grass box extra.
IMPERIAL [MacDonald] :
A mower marketed by W. MacDonald of Leeds in the 1860s. This was a gear-driven roller machine available in sizes from 10 to 20 inches with prices in 1869 ranging from £3.10.0d to £7.10.0d. Perhaps a reader can say if there was a relationship between this and the Picksley, Sims & Co. mower of the same name.
IMPERIAL [Picksley Sims] :
A mid to late 19th century product of Picksley Sims & Co., of Manchester. This was a gear-driven roller mower made in a variety of sizes from 6 to 36 inches - the larger ones being donkey, pony or horse mowers.
IMPROVED AMERICAN :
A product of Shanks, c1888, this was a conventional sidewheel mower available in 10, 12, 14, & 16 inch sizes with prices ranging from £3.0.0d to £5.10.0d.
IMPROVED GEAR :
A pony mower by Barnard, Bishop & Barnard of Norwich, late 19th/early 20th century.
IMPROVED PATENT :
A pony mower by Picksley, Sims & Co. of Leigh, Lancashire, late 19th/early 20th century.
An American imported sidewheel mower, c1900, available in 10, 12, 14, 16 & 18 inch sizes with prices ranging from 45/-d to 80/-d.
INVINCIBLE [John Crowley] :
A range of mowers made by John Crowley & Co., Sheffield, to the patent of Samuel Edwards in 1873. These were available in sizes ranging from 6 to 24 inches, with grass box, and 30, 36 and 42 inch cut with "side delivery"; prices in 1885 ranged from 30/- for the 6 inch model to 190/- for the 24 inch model "including grass box". Prices for the 30 inch, 36 inch and 42 inch models were £22.0.0, £26.0.0 and £30.0.0 respectively. Prices in 1888 ranged from £1.10.0d to £9.10.0d. The largest were intended as pony mowers.
INVINCIBLE [Qualcast] :
A sidewheel catalogue mower made for the CWS by Qualcast.
A product of Shanks, c1920, this was a ball-bearing manual roller mower. By 1927 the "New Ivanhoe" was being offered in 12, 14, & 16 inch sizes at prices ranging from £7.0.0d to £9.5.0d.
A traditional wooden-handled manual sidewheel mower manufactured after World War 2 by Qualcast under the Folbate name.
An inter-wars "catalogue" mower marketed by Johnson, Clapham, and Morris but actually made by Qualcast and bearing a close resemblance to their "Model E".
JACKSON (The) :
Late-1930s manual sidewheel and roller mowers advertised in the Thomas Plant catalogue. The sidewheel mowers were sold in 8, 10, & 12 inch sizes and the roller mower in 12 inch.
A product of Shanks c1920, the "Jehu" was a powered roller mower available in 20, 24,and 30 inch sizes. By 1927 the basic 20 inch cut machine was being offered at £60.0.0d, the 24 inch machine at £70.0.0d, and the 30 inch machine at £90.0.0d. Available with bucket-type grass box at standard price or patent delivery (side release) apparatus at £2-10-0 extra.The "Jehu" is distinguished from the smaller "Wizard" by its cylindrical in-line (rather than transverse) petrol tank. At the same time Shanks were offering a 4 hp 24 inch machine and a 10 hp. 36 inch machine but these were not described as "Jehu" mowers.
An 8-10" sidewheel catalogue mower made by "Brill", has "Foreign" cast into the wheels. Colours were red, green, and gold.
A product of W.T. Teagle, this was a hand-held hedge and weed cutter with a reciprocating-knife head, introduced in the mid-1950s. Power was provided by the designer's own 50cc 2-stroke engine. Early machines had a chain drive enclosed within the tubular framework, but later machines had a shaft drive with bevel gearing. The last model, the "Super Jetcut" had a totally enclosed gearbox.
A product of W.T. Teagle, this was a single-wheeled self-propelled reciprocating knife mower made in the late 1950s/early 1960s.
A product of Qualcast, this was a mains electric rotary mower with a rear-mounted grass box based on the earlier "Rota Mo 360". Introduced in 1974 the "Jetstream" was subsequently manufactured in a variety of sizes and with a petrol engine option. The "Jetstream" was also made under the Suffolk name.
JEWEL [Coldwell] :
A late 19th century American sidewheel mower available in 10, 12, 14 & 16 inch sizes with prices in 1894 ranging from 22/6d to 29/6d. No grass box was offered. By 1902 8 inch and 18 inch sizes had been added to the range, the UK agents being Thomas McKenzie & Sons, Liverpool. Possibly a product of Coldwell who also made an asymmetrical trimmer under this name.
JEWEL [Pierce] :
A sidewheel mower by Pierce of Wexford (Eire) introduced in 1938 as a successor to the "Hector" and continuing in production until 1950.
A 1960s grass cutting machine with small reciprocating knife blades driven by a 1hp J.A.P. two-stroke engine. This was a product of Cylinder Components Ltd. (Cyclo) of Kings Norton, Birmingham. One known example, distributed by Robinsons of Winchester, bears the serial no. 284. In 1958 Robinsons (who seem to have been the main distributors) were selling the "New Model" for £32.10.0d. A Webb 12 inch cylinder attachment could be fitted for cylinder mowing.
An unusual American sidewheel mower patented in July 1878, the "Johnson" employed a large steering wheel on the end of the handle with acted upon each of the drive wheels. The phrase "sledgehammer to crack a nut" springs readily to mind.
A toy lawn mower with a 7 inch cut made by the Crescent Brass & Iron Co. of Detroit. The various models of this had alphabetical designations. An interesting late 19th century forerunner of the children's mowers made by Webb in the 1950s.
JUNIOR ARCHIMEDEAN :
An American sidewheel mower made by Hills, c1888, and imported by John Rollins & Co. of London Bridge. This was available in 10, 12, 14 & 16 inch sizes at prices ranging from 55/-d to 85/-d; the rear-mounted grass box being 5/-d extra.
JUNIOR SICKLE :
A product of John Allen, this was a hand-propelled rotary mower, similar to the early Hayter machines, introduced in 1959.
K (Model) :
A 1930s product of Qualcast. This was a sidewheel mower similar to "Model H" but having 10 inch diameter driving wheels as opposed to 9 inch in the "H". Available in 12, 14 & 16 inch cutting widths.
A sidewheel mower, probably of American origin, marketed in Australia, 1930/40s. One 14 inch example is owned by a Club member.
KEEN KLIPPER :
An American double-gear sidewheel mower imported by John Shaw & Sons Ltd. of Wolverhampton c1905.
KEEN KUTTER :
An improved version of the "Keen Klipper" with a triple-gear drive patented by E.C. Simmonds of St. Louis, Missouri, USA. Also imported by Shaw. The "Keen Kutter" was a trade name used on many of the manufacturer's products.
A small hand-held rotary machine with a 1 hp. 2-stroke engine manufactured by the Bristol firm of Kemmco, c1958. This was designed to be used on tight corners and banks rather in the same way as the later strimmers.
A 15 inch roller motor mower made by Brecknell & Sons, Tangent Works, Keynsham, Bristol in the early 1930s. This sold at 25 guineas. One example in the UK has a dark blue and orange colour scheme and bears the serial no. 2342.
KING'S CROSS :
An American sidewheel catalogue mower marketed by W.B. Fordham & Sons Ltd. of King's Cross, London, c1906.
A mower marketed by Farmfitters Ltd. c1955, this was a rotary machine advertised as "Britain's new lawnmower" and which retailed at £36 plus £6.6.0d purchase tax.
A product of the New York, USA firm of Carr & Hobson, c1885, this was a roller mower available in 10, 12, & 14 inch sizes advertised as having "full-width shear steel blades".
An early 20th century sidewheel mower made by the Philadelphia Lawn Mover Co. and available in 12, 14, 16 & 18 inch sizes. Prices in 1910 ranged from £2.9.0d to £3.10.0d.
A product of Ransomes, Sims & Jefferies, this was a 15 inch 4-blade manual machine made in the mid-1920s as a rough grass mower. In 1927 it sold at £8.5.0d. The chassis and wheels of the "Kut-Ruf" were identical to those used on the earlier "New Empire", although the mower's similarity to the Pennsylvania "Fairway" also indicate American origins.
A series of sidewheel mowers made by the American Eclipse Lawn Mower Co. in the 1940s. In September 1949 the Model "L" was being made in 16 & 18 inch sizes which sold at $28.95 and $30.50 respectively. A "Hi-Cut" version (16 inch only) was available also at $30.50.
A 20th century ball-bearing sidewheel mower made by The Eclipse Lawn Mower Co. of Prophetstown, Illinois, USA. This was made in various cutting widths and cylinder variations, but all (apart from export-only machines) had the firm's Adams self-sharpening device. Local collectors in the US give the manufacturing dates of the "Lady" as 1908-1928. An export-only model, occasionally to be found in the UK, utilised the frame of the post-war "Arlington", wheels from the Model "M", and married these to pre-war "Lady" handles. One example of this export mower in an Essex collection has a light green colour scheme.
A late-1940s electric rotary mower with a single handle and front roller. Made to resemble a ladybird, it could be used on AC or DC and sold for 16 gns in 1950. "Ladybird" machines were also offered throughout the 50s into the 60s, eg in their 1961-62 catalogue Stauntons of Northampton were offering a 12 inch self-propelled electric cylinder mower by "Ladybird" for £23.19.5d plus Purchase Tax of £4.10.7d. In the 1950s-70s "Ladybird" also made bolt-on electric conversion units for popular manual machines such as Webb and Qualcast. In the 1950s, the owners of the company are given as the AMI Lawnmower Co. of Whitcomb St. London. See also "New Ladybird".
A late 19th century sidewheel mower made by the Superior Machine Co. of Springfield, Ohio.
A sidewheel mower made by the American firm of Landers, Frary, & Clark c1870.
A late1940s/50s American powered sidewheel mower made by the Eclipse Lawn Mower Co. Powered by a 2hp. Briggs & Stratton engine the 18 inch
A range of rotary mowers by Mountfield introduced in 1993.
LAWN FLITE :
A ride-on mower from the 1970s with a Briggs & Stratton engine.
LAWN KING :
US powered mower by Jacobsen c1957.
LAWN TRIMMER :
A small 10 inch roller mower by Webb from the 1950s with a metal pole handle.
A British-made ride-on mower by Westwood, c1976, this was available in three models, the B5, B6 and B8, with differing engine sizes.
A product of Allen Power Equipment in the 1980s, this was a hand-propelled rotary mower with 18 inch cut and a Briggs & Stratton engine.
A product of British Anzani and developed from the "Easimow", of 1955 this was one of the first post-war ride-on machines and because of its shape is sometimes known as the "Swan Neck" model. Originally with a Villiers engine and a single driving wheel, later versions had Briggs & Stratton engines and twin driving wheels. The "Lawnrider" was in production from 1958 until the mid-1960s. One single-wheel B/S engined example bears the serial no. L-24 393. In 1963 the "Lawnrider" was being offered in 18 and 24 inch sizes at a price of £90 and £115 respectively.
A New Zealand-built rotary mower with a JAP engine.
LEADER [Granite State] :
An American sidewheel mower, c1905, made by the Granite State Mowing Machine Co. of Hinsdale, New Hampshire, USA.
LEADER [Hills] :
An American sidewheel mower made by Hills of Hartford, Connecticut, USA. c1888.
A 1950s gang mower unit by Lloyds available in two versions, one with 18 inch wheels and 30/36 inch cut and the other with 20 inch wheels and a 30 inch width.
A product of Ransomes, Sims & Jefferies, this was a manual sidewheel mower made in the 1930s, and a successor to the "Lion". Advertised as "the world's best sidewheel mower", the "Leo" was available in three sizes and sold for 53/6d in May 1939. Also available as a bank cutter with a pole handle.
A hybrid mower with two inside-frame wheels at the rear of the cutting cylinder. Made by the Senaca Falls Lawn Mower Co., New York, USA, c1889.
LEWIS DE LUXE :
LIGHT GANG :
A product of Shanks, this was a lightweight triple gang mower designed for golf fairways and "where the way is not so fair". Price was £198-0-0 in 1952.
LIGHT MOTOR [Greens] :
A range of Green's motor mowers in the 1920s. Offered in 1929 with a kick-start, prices ranged in that year from £37.10.0d for a 16 inch machine to £85 for the 30 inch.
LIGHT MOTOR [Ransomes] :
A range of Ransomes Villiers-powered roller mowers introduced in 1930. usually with serial numbers bearing the "K" prefix (eg K1058 was made in 1933, one of 1,400 14 inch Mk.1 machines made before this model was discontinued in 1936). Early models (eg K577) had a cast air intake with the "VEC" motif, rather than the mesh intake of the later models.
See "Moreton's Lightning".
Many manufacturers made mowers described in the advertising literature as "Lightweight" machines. Best known are the range of mowers made by ATCO in the mid to late 1930s. These followed on the tradition set by the "Standard" and the "HY", being mowers made for the smaller suburban garden. Side plates were used, unlike the "open frame" construction of the earlier mowers, and the petrol tanks were mounted transversely and not "in-line". A variety of Villiers engines were used, mostly housed in an aluminium fairing, and in some machines a "kick-start" was introduced for the first time. These "Lightweight" mowers paved the way for the "kick-start" mowers by that company so popular after World War 2 and into the 1950s.
A product of Ransomes, Sims & Jefferies, the "Lion" was a manual sidewheel mower introduced in the early years of the century and continuing in production into the 1930s. It was available in four sizes, 9, 11, 13, and 15 inch cutting widths at prices in 1915 ranging from £1.6.0d to £1.12.0d. Grass boxes, delivery plates, and a long handle for banks were optional extras. Another extra was Slatter's Patent Front Runner which could be fitted to all sidewheel mowers having a rear roller, thus enabling them to overlap the lawn edges.
A 1930s sidewheel mower by Ransomes available in 10 and 12 inch sizes. Similar to the "Lion" but of aluminium construction.
LITTLE GEM :
A small sidewheel mower patented by Ransomes, Sims & Head (Pat. No. 3261) on 17 September 1875. This had a slightly curved "T" handle and a trailing grass box.
LITTLE ROBIN :
A 1960s product of the Mendip Mower Co., these 8 & 12 inch rotary mowers and scythes had BSA 65cc. or Villiers 75cc. power plants.
LITTLE WONDER :
A range of cutters and trimmers introduced by Webb in the 1970s. These were powered by electric motors (either mains or battery) and consisted of a rotary trimming head on the end of a long handle. Two models were available in 1972 selling at £30.75 and £35.95 respectively.
An American catalogue mower imported into the U.K. by W.H. Fagan (W.H.F.) of Aldersgate, London, c1900. In 1903 this sidewheel machine was available in 8, 10, 12, 14 & 16 inch sizes with prices ranging from 22/6d to 30/6d (grass boxes extra).
LONDON EXCELSIOR :
See "Excelsior" [Chadborn & Coldwell].
LONG GRASS :
A product of Shanks, this was a high-wheel sidewheel mower (1930s/50s) with a 15 inch cutting width and a four-bladed cylinder. Neither grass boxes nor delivery plates appear to have been offered. The price in 1939 was £8.10.0d.
A series of American sidewheel mowers made by the Eclipse Lawn Mower Co. In 1950 the Model "M" with its tubular steel handle was being offered in 16, 18 and 20 inch sizes.
A manual sidewheel mower sold by Metal Agencies Ltd. of Bristol, early 1930s. Probably a catalogue mower, the "Maco" was sold in 10, 12, & 14 inch sizes for 20/6d, 21/6d, and 23/-d respectively.
MAGIC [Follows & Bate] :
A product of Follows & Bate c1931, this was a sidewheel mower of all-steel construction. One existing 10 inch example bears the serial no.19969/31. The "Magic" was supplied to the Army & Navy stores and sold as the "Ancos" and to Littlewoods as the "Spinney". This latter machine had a yellow colour scheme. The "Magic" was also sold post-war under the "Folbate" name. Many un-named mowers of the late 1930s-1940s period are "Magics", as are mowers like the "Velocity".
MAGIC [USA] :
An American sidewheel mower, c1890, this was available in 8, 10, 12, 14 & 16-in sizes with prices ranging from £1.1.0d to £1.18.0d -grass box extra.
A product of Webb, this was a powered roller mower from the 1950s/60s utilising a small J.A.P. two-stroke engine to drive the cutters only, as on the "Powered Panther". A range of "Tarpentool" accessories could be driven off the mower by means of a flexible drive. In 1960 the 12 inch model sold at £38.17.0d.
MAJESTIC [Ransomes] :
A product of Ransomes, Sims & Jefferies, this was a powered roller mower from the mid-1950s. A mains electric version was also sold.
MAJESTIC [USA] :
An American sidewheel mower, c1895. This was a ball-bearing mower imported through J & C Plimpton of Liverpool.
MAJOR [Dux] :
Product of Dux.
MAJOR [JP] :
A product of J.P. in the "Maxees" range, this was a 12 inch manual roller mower selling at £6.17.6d in 1939.
MAJOR [Qualcast] :
A product of Qualcast, c1927 to c1930, and the first roller mower produced by this company, the "Major" was not a success and was soon replaced by the "Panther". The "Major" was only produced in 12 inch cutting width and sold for £5-10-0 in 1927.
A product of Follows & Bate c1880, this was a sidewheel mower with enclosed gearing available in 8, 10, 12, 14 & 16 inch cutting widths. In 1881 prices ranged from 35/-d to 90/-d. By 1890 6 and 7 inch mowers had been added to the range and prices ranged from 21/-d to 105/-d.
MAPLE LEAF :
A Canadian-built sidewheel mower. An 8 inch example is owned by a Club member.
A range of mowers by Ransomes, Sims & Jefferies. The early "Marquis" was a 1920s manual roller mower with "chevron" blades on the cutting cylinder, but the later post-war models were high quality powered mowers for the professional market which were still being made into the 1990s well after the company withdrew from the domestic market. By 1997 the "Marquis" with its 15cm cut was the smallest machine being made by that company.
A 10 inch roller mower (probably by Arundel & Coulthard) c1950.
A manual roller mower by Godiva Engineering c1927.
A range of professional powered roller mowers by Greens in the 1940s/50s. These were available in 17, 20, 24, 30 & 36 inch cutting widths with prices in 1956 ranging from £124.12.8d (inc PT) to £305.18.3d. The 17 and 20 inch sizes had Villiers engines whilst the larger machines had Norman engines. A "Master Verge Cutter" was also available as a larger version of the "Motor Roughcut".
MASTER LIGHTWEIGHT :
A lightweight version of the Greens "Master", this was a 14 inch mower which in 1949 sold at £36.0.0d (plus PT). A feature of this machine was the easily removable cutting cylinder. The engine was a 98cc Villiers two-stroke.
MASTER VERGE CUTTER :
A product of Ransomes, Sims & Jefferies from the 1960s onwards. Made for the professional market this was one of mowers which continued in production when the firm withdrew from the domestic market in the mid-1970s.
A product of Ransomes, Sims & Jefferies, this was a powered roller mower for the professional market and one of the marques continuing when the company withdrew from the domestic market in the mid-1970s. A more powerful version of the "Meteor".
A product of J.P., this was a late 1940s sidewheel mower with the typical J.P. "X" handle. It was unusual only in that it was the product of a firm normally specialising in roller mowers. Production dates were from 1946-49.
A range of models by J.P. including their 12 inch manual roller mower selling at £4.18.6d in 1939. This mower continued in production post-1945 and was being offered in 1949 at £14.7.4d (including PT). All in all the "Maxees" was made from 1937 to 1971 in its various forms, electric and petrol engine models (including a conversion unit) also being available from 1957-1963
A 1950s product of Shanks, this was a powered roller mower designed for fine turf areas, having a 16 inch cut and a 6-bladed cutting cylinder.
MERCURY [Ransomes] :
A product of Ransomes, Sims & Jefferies, this was a powered roller mower with 16 inch cut and a 75cc Villiers 4-str. engine made between 1958 and 1964. A mains electric version was also made. By the 1961/2 season the "Mercury" was being offered complete with grassbox at £47.10.0d plus Purchase Tax of £9.5.3d.
MERCURY [Sidewheel] :
An early-20th century sidewheel mower.
MERCURY [Taylor Forbes] :
A sidewheel mower manufactured by Taylor-Forbes. The mower was available in 14" cut with five blades on the cylinder and utilising ball bearings. It was listed in a catalogue dated 1949, priced at $17.95.
MERLIN [Allen] :
A product of Allen of Oxford under the Mayfield name. This was a 1960s ride-on rotary mower which resembled a miniature tractor. The "Merlin" had a 231cc Briggs & Stratton engine and 26 inch cut.
MERLIN [Hayter] :
A product of Hayter, this was a hand-propelled rotary with a Briggs & Stratton engine introduced in 1973.
METEOR [Ransomes] :
A product of Ransomes, this was a powered roller mower for the professional market in the 1950s. One 24 inch Mk.4 bears the serial no.BL319 and the provisional patent no.30494/54. By the 1961/2 season the "Meteor-Four" with its 150cc 4-str. J.A.P. engine was being sold in two widths (20 & 24 inch) at £117 and £130 respectively, plus Purchase Tax.
METEOR [Suffolk] :
A product of Suffolk, this was rotary mower introduced in 1974 with a specification similar to the "Jetstream". The standard version had a 3 hp. Aspera engine whilst the De Luxe version had a 3.5 hp. Briggs & Stratton.
See "Meteor" [Ransomes].
MID WEST :
A 20th century American sidewheel mower, a product of The Eclipse Lawn Mower Co. similar to the "Lady"
A 1950s product of ATCO this was a powered roller mower of traditional design showing its 1930s/40s origins, powered by a 150cc 4-stroke engine. By the early 1960s the "Middleweight" was being offered in 20 and 24 inch sizes at £75.0.0d and £95.0.0d respectively.
A product of Ransomes, Sims & Jefferies c1930. A 14 inch Villiers-powered roller machine, the "Midget" was first produced in the 1930s in response to the growing need for mowers for the small suburban garden. The power plant was a 1hp. two-stroke engine.
An early 20th century high-wheel sidewheel mower marketed by Millard Bros. and probably made by the F & N Lawn Mower Co. of Richmond, Indiana, USA. This appears to be identical to the "Improved Champion" mower retailed by Gamages in 1911; the 12 inch cut "Milbro" costing 37/-d and the Gamages version costing 15/9d.
A range of small roller mowers by J.P. (1930s/40s ?). These had a 9 inch cut and a 6-bladed cutting cylinder.
MINI MOW :
An American-made toy rotary mower, mid-20th century.
MINIATURE MOWER FOR CHILDREN :
In the 1950s and 60s Webb made a range of tiny working mowers for children. These were manual roller mowers similar to the range of adult machines made by that company but were only 1ft 9in high and had an 8 inch cut. Drive from the roller to the blades was by rubber belt. Small tin grass boxes were fitted and these bore either the Webb name inside an oval or the later Webb "striped lawn" logo. It is doubtful whether safety standards would allow these to be made today.
MINIATURE [Atco] :
The name given to a range of 1960s powered cylinder mowers by ATCO. These had 75cc recoil start engines and, in 1964, retailed at £29.10.0d (12 inch) and £34.0.0d (14 inch)
MINIATURE [Barnard, Bishop & Barnard] :
A range of lawn mowers by Barnard, Bishop & Barnard, c1870, these were gear-driven roller mowers available in sizes from 10 to 18 inches, with prices in 1871 ranging from £2.2.0d to £6.10.0d.
MINOR [Dux] :
See Dux "Minor".
MINOR [JP] :
A product of J.P. Made in 9 and 11 inch cutting widths these were manual roller mowers selling in 1939 at £3.17.6d and £4.17.6d respectively.
MINOR [Ransomes] :
A product of Ransomes, Sims & Jefferies from the late 1940s to the late 1950s. Initially a very compact Villiers-engined roller machine, the "Minor" was one of first post-war mowers and was developed through successive models. The Mk.7 was an 18 inch kick-start machine, an example of which bears the serial no. BC4544.
A product of Mountfield, this was a 1980s rotary mower.
A product of Samuelson, c1888, this was a gear-driven roller machine available only in 6 inch cut and marketed specifically for small lawns and borders. The price in 1888 was £1.10.0d which included 3/-d for the grass box.
MODEL B ELECTRIC [Webb] :
A 14 inch electric roller mower manufactured by Webb in the 1950s. The Webb Lawn Edge Trimmer was available as a separate accessory to attach to the mower.
MODEL ELEVEN :
Gang unit produced by Shanks in the 1960s with 10 inch diameter cutter, designed to be combined in triples and quintuples.
MODEL NINE :
Gang unit produced by Shanks in the 1960s, designed for fine grassland. Available with 7-blade cutters for extra fine cut.
MODEL TEN :
Gang unit produced by Shanks in the 1960s, specially built for tougher work on park, pasture, orchard or airfield. Supplied in formation of one to nine units with overall cutting widths from 2 feet 6 inches to 21 feet.
A late 19th century American sidewheel mower made by the Blair Mfg. Co. Available in 10, 12, 14 & 16 inch sizes.
MONARCH [F&N] :
A late 19th century American sidewheel mower with a trailed canvas grass box made by the F & N Lawn Mower Co. Available in sizes from 10 to 20 inches.
MONARCH [Greens] :
A product of Greens c1877, this was a roller mower advertised as having "chain and internal gear combined". Available in 12 to 24 inch sizes, these mowers were designed for two-man operation. See also "New Monarch".
MONARCH [JP] :
A product of J.P., this was a chain-driven roller mower from the late 1940s, available in 12-14-inch sizes from 1949 to 1957
MONARCH [Mountfield] :
A product of Mountfield, this was a 21 inch rotary mower introduced in 1988.
MONARCH [Stearns] :
An American sidewheel mower made by E.C. Stearns of Syracuse, New York, USA, c1890. Available in 10 to 20 inch sizes. The colour scheme was olive green with orange blades and side wheels.
A product of Greens in the late 1940s/5Os, this was a manual chain-driven roller mower with a tubular steel handle. It had a 6-blade cutting cylinder and was a low-cost version of the "Zephyr". The improved "Monitor 2" sold for £9.9.0d in 1956.
An American mower c1923 by the Montagu Mfg. Co. utilising the principles of the 1908 patent by J.H. Holland. This machine utilised a series of cutting discs rotating in the horizontal plane and was in production until 1946 . One example in an Essex collection has an inverted "A"-handle.
A sidewheel mower marketed in western Europe c1920. Possibly an American import.
MORETON'S LIGHTNING :
An American-made sidewheel mower, probably made in the 1920s/30s. One example is known in a UK collection.
MOTO MOWER :
Designed & patented by The Moto Mower Company of Detroit, USA, (previously Pontiac Lawn Mowers est. 1919) this large powered sidewheel mower was put into production by Lloyds of America, makers of the Pennsylvania mower, c1924, and imported into the UK by Lloyds of Letchworth. These were marketed as the Pennsylvania Moto Mower. They had a 27 inch cut and 248cc Blackburn engines. In the mid-1930s a 21 inch model was introduced which had a slightly larger JAP engine. This later machine was marketed as the Lloyds Pennsylvania Motor Mower.
A range of ride-on garden tractors by Allen Power Equipment.
MOTOR ROUGHCUT :
See "Roughcut" [Greens].
MOTOR SCYTHE :
MOTOR SICKLE :
A product of Vivien Loyd & Co., Camberley, c1950, the "Motor Sickle" was an 18 or 21 inch rotary mower with a Villiers engine and pram-type spoked wheels. The engine drove the cutting head only. This machine was first exhibited at the 1950 Smithfield Show and, unlike most rotary mowers even in the early days, had completely unguarded blades. The retail price in 1951 was £39.15.0d. Later marketed as the "Four Seasons Scrub Cutter".
MOW MASTER :
US rotary mower c1950.
A product of the Birmid-Qualcast Group, this was an electric rotary mower from the 1980s which was marketed with both plastic blades and as a reel cutter.
A manual rotary mower (1960s ?) . The vertical drive from the main wheel was, by a series of chains and pulleys, converted to horizontal drive which in turn operated a rotary cutter. Whether the machine could be pushed fast enough to give adequate rotation to the blade must remain questionable, although it seems to perform well enough on short grass. This was probably a catalogue or mail-order mower although no other details are available. The colour scheme of the one machine seen is sky-blue.
Combination power mower for use with a tractor unit made by Scott Bonnar c1938, available in 7 and 11-foot cut.
See "All British".
A German-made 1920s sidewheel mower (probably by Brill) marked "FHL". Some of these machines had a 7 inch cutting width but were probably advertised as being 8 inch. This was not unusual for German mowers of the period. One 8-in. example in an Essex collection has the date "1928" cast into the wheels and sole plate. This machine also has "RF" and "RFK 5/55" cast into the wheels.
See Trusty "Mowmotor".
MULTUM IN PARVO :
A product of Thomas Green, translated as "With little, much". Introduced in the 1880s and continued in production well into the 20th century. In 1887 four sizes were being offered (6, 7, 8 & 10 inch) at prices ranging from £1.5.0d to £3.0.0d.
NATIONAL [Carr & Hobson] :
A product of the New York, USA firm of Carr & Hobson in the 1880s, this was a sidewheel machine advertised as having an easily removable cutting cylinder. Available in 10, 12, 14, & 16 inch sizes.
NATIONAL [Henderson] :
A product of Hendersons, this was a manual chain-driven roller mower, c1905.
NEW AUTOMATON :
NEW BRITISHER :
A product of Shanks and an improved version of the "Britisher", this was a sidewheel mower made in the 1940s and which was still in production in 1950, being offered in 12, 14 & 16-in sizes, with the grass box and delivery plate as optional extras.
NEW CENTURY :
A sidewheel mower by Greens c1900. This was available in a variety of sizes and enjoyed a long production run, still being advertised in 1929 in 9, 11, 13, 15, and 18 inch sizes at prices ranging from £2.5.0d to £3.2.6d.
NEW CHAMPION [Coldwell Suffolk] :
Catalogue mowers made by Coldwell and Suffolk.
NEW CHAMPION [Gamages] :
A sidewheel mower, an American catalogue machine, marketed under the "Gamages" name c1910. An example is in the Milton Keynes Museum. This is probably a product of the Champion Mfg. Co. of Richmond, Indiana, USA.
NEW CHARM :
A product of B. Hirst of Halifax, c1879, this was a gear-driven roller mower available in sizes ranging from 10 to 24 inches (the largest being pony mowers). The model was still being advertised in 1892.
NEW CLIPPER [Barford & Perkins] :
A late 19th century manual roller mower by Barford & Perkins. By 1898 the "New Clipper" had a height regulator worked from the handles and a serrated bottom blade.
NEW CLIPPER [Coldwell] :
See "Clipper" [Chadborn & Coldwell].
NEW COUNTY :
A product of Webb, this was an 18 inch rotary mower c1964 with a 3hp. Briggs & Stratton 4S engine
NEW DELIGHT :
A late 19th century American sidewheel mower made by the F & N Lawn Mower Co. Available in sizes from 10 to 20 inches.
NEW DEPARTURE :
A late 19th century American sidewheel mower made by the Supplee Hardware Co. of Philadelphia, USA, and imported into Britain by Lloyd Lawrence & Co. Offered concurrently with the "Pennsylvania" in the 1880s.
NEW DIAMOND :
An American sidewheel mower, c1900, made by Whitman & Barnes of Chicago, USA. Available in 12, 14, 16, 18 & 20 inch sizes, prices in 1900 ranged from 50/-d to 62/-d. This name is also found on the handle of a sidewheel mower made by Herschel of Peoria, Illinois, USA.
NEW EASY :
NEW ELECTRIC :
This, despite its name, was a late 19th century American manual sidewheel mower made by Whitman & Barnes of Chicago, Illinois, USA. It had 9 inch diameter drive wheels and a 4-bladed cylinder.
NEW EMPIRE :
A high wheel sidewheel mower made by Ransomes Sims and Jefferies and superseding the "Empire Major". In 1915 this was being offered in 13, 15, 17, 19 & 21 inch sizes at prices ranging from £4.15.0d to £7.10.0d. The chassis and wheels of the "New Empire" are identical to those on the later "Kut-Ruf".
NEW ENGLAND :
An American imported sidewheel mower, c1895, this was available in sizes ranging from 10 to 18 inches and prices from 19/6d to 28/-d. One agent handling this machine was J.C. Plimpton & Co. of Liverpool, but there were others.
NEW ERA [Lloyds] :
A late 1940s/1950s product of Lloyds made for bowling and putting greens. This was a manual roller mower with tubular "X" handles, available in 15 and 18 inch widths.
NEW ERA [Pennsylvania] :
A product of "Pennsylvania" of typical American design for the period (early 20th century) this roller mower shared the same handles as Green's "New Monarch" and there are examples bearing both names.
NEW EXCELSIOR :
NEW GODIVA :
The name under which Nene Engineering launched their "Godiva" mower following the demise of the original makers Barford & Perkins c1920.
NEW HENLEY :
See "Henley" (Richmond, Indiana).
NEW INTERNATIONAL :
A late 19th century American sidewheel mower imported by Hoods of Birmingham. Available in 10, 12 & 14 inch sizes this was being sold at 13/9d, 14/6d, and 15/6d in 1900 (grass box extra).
NEW IVANHOE :
NEW LADYBIRD :
A small streamlined mower by Flymo c1964 using an Aspera engine. This was the company's first rotary mower.
NEW MODEL :
A product of the American firm of Chadborn & Coldwell, c1885, this was a sidewheel mower also available in a high-wheel version. In 1887 the "New Model" was being offered in sizes ranging from 6 to 20 inches at prices from £1.5.0d to £5.10.0d. In France in 1889 the "New Model" was being offered in 25, 30, 35, 40, 45, and 50 cm. sizes at prices ranging from 45 fr. to 95 fr. - the Paris agent being Th. Pilter at 24, Rue Alibert.
NEW MONARCH :
A roller mower by Greens and sharing the same handles as the Pennsylvania-designed "New Era" (early 20th century).
NEW NORKA :
An early 20th century sidewheel mower made by Whitman & Barnes of Chicago, Illinois, USA, c1905. This had 9 inch diameter drive wheels and a 3-bladed cutting cylinder.
NEW PARIS :
A product of Ransomes, Sims & Jefferies c1887. This manual sidewheel mower, also available with a long handle for work on inclined surfaces, was the "Paris" mower made for the home market. By 1889 the "New Paris" was being offered in 6, 8, 10, 12, 14 & 16 inch cutting widths at prices ranging from 30/-d to 70/-d, box extra. (See also "Anglo-Paris").
NEW PARK :
An imported American sidewheel mower, c1878. The British agents were J.J Thomas & Co. of the Paddington Iron & Wire Works. Available in 10, 12, 14 & 16 inch sizes, prices in 1881 ranged from £2.0.0d to £3.10.0d.
NEW POWER GREENSMOWER :
A product of the Ideal Power Lawn Mower Co. c1931. See "Greensmower".
NEW PRESIDENT :
NEW PRESTO :
A sidewheel ball-bearing machine with 12 inch cut, manufactured by Arundel Coulthard & Co of Preston in the 1950s, possibly introduced 1954. The design incorporated 7 inch diameter "non-skid" wheels.
NEW ROUGH :
A product of the Ideal Power Lawn Mower Co., this was a gang-mower c1931 designed for cutting the rough areas of golf courses.
NEW ROYAL :
A product of Green's, this was a sidewheel machine c1900. Large versions of this were made for use on fine grass. In 1906 this mower was offered in 17, 19 & 21 inch widths. The Mk.2 "New Royal" was still in production in 1935 and available in 13, 15, 17 & 19 inch sizes with prices ranging from £7.0.0d to £10.0.0d (grass box and delivery plate extra), but by this time the mower was looking very dated.
NEW YORK :
A late 19th century American sidewheel mower made by Coldwell. This was available in 12, 14 & 16 inch sizes.
NEWER EASY :
A toy lawnmower retailed by Gamages c1914. The wording in the catalogue is worth repeating, "The knives revolve in exactly the same way as a big Mower and it is quite easy to push. A polished handle is fitted, and the metal work is finished in blue, green, red, and black enamel; the knives in aluminium paint. The whole is neatly cardboard boxed. It is not intended to cut much grass, but it snips off some, so may be truly said to cut grass." The price in 1914 was 6/3d with grassbox and 4/11d without.
Although many firms in the mid to late 19th century offered patent noiseless mowers, due mainly to the noisy operation of the early gear-driven machines, the best known noiseless machines were those offered in the late 1860s by Barnard, Bishop & Barnard with the words "Patent Noiseless Lawn Mower" on the handles. In 1869 these were sold in sizes from 6 to 30 inches (the largest being horse and pony machines). These mowers utilised the company's India rubber tyre which ultimately proved unsuccessful.
A product of the F & N Lawn Mower Co. of Richmond, Indiana, USA. In 1931 this sidewheel mower was advertised as "unbreakable" (having been dropped from an aeroplane) - a claim which the editor finds hard to believe !
NOVEL LAWN MOWER :
See Warren (Charles).
A reciprocating-knife mower patented in December 1870 by A.J. Ohmer of Hamilton, Ohio, USA. This consisted of a wheel-driven cutter-bar to which a pole handle was attached. The machine was advertised as being available in 14, 16 & 18 inch sizes, the latter intended for side-draft operation by a pony. The smallest machine weighed 16lbs and the largest 30lbs.
A late 19th century product of Chadborn & Coldwell, this was an American sidewheel mower, c1891.
An early 20th century Canadian-built sidewheel mower with double gearing available in 10, 12, 14, 16, 18 & 20 inch sizes, with prices in 1904 ranging from £3.6.0 to £5.12.6, making it an expensive mower for the period.
A product of Hayter for the professional market, the "Orchard" rotary with its 5ft. cut was introduced in 1950.
A pony mower by Hartley & Sugden of Halifax, late 19th century. Available in 20, 22, 24 & 26 inch sizes, this was smaller version of the "Balmoral".
A product of Hayter, this was a self-propelled rotary from the 1970s.
An American sidewheel mower c1925 marketed by the London wholesalers WBF & S Ltd. This sold at 34/6d, almost 12/-d less than the same firm's Qualcast "E".
A product of Ransomes, Sims & Jefferies, the "Overgreen" was a large walk-behind mowing unit designed specifically for golf courses and similar areas. Introduced in the 1930s and manufactured until the 1950s, this machine had a 348cc Sturmey Archer (Ransomes) engine mounted between two large wheels and was used to push one mower unit whilst pulling two smaller mowers at the rear.
An American designed powered edge trimmer. In 1960 this J.A.P. engined machine with its vertically rotating cutters retailed for £30.10.0d. It was marketed by a number of UK companies including Shay and Andrews of Sunningdale.
A post-1945 powered roller mower from Lloyds designed for professional and fine turf use. The engine was a 1hp. 4-stroke Villiers.
The name given to long series of Qualcast roller mowers commencing with the initial model in 1932 and continuing into the 1970s. The majority of these machines were conventional twin-handled manual chain driven mowers until the introduction of the "Powered Panther" in the 1950s with its tiny J.A.P. engine, although it was possible in the 1930s to obtain bolt-on power units of various sorts. The "Panther" continued to be made under the Suffolk name into the 1990s. The "Superlite Panther" was a lightweight post-World War 2 machine with diecast aluminium side plates, whilst the "Super Panther Electric", introduced in 1962, was a mains electric machine. Battery powered versions were also available.
PARAGON [Anderson] :
A late 19th century sidewheel mower made by F.S. Anderson of Richmond, Indiana, USA.
PARAGON [Dennis] :
A 1970s development of the Dennis 'Z', this was a smaller version of the "Premier" and like that mower employed a chevron cutting cylinder.
PARAGON [Greens] :
A product of Greens, this was a manual roller mower c1940 designed for golf greens and small lawns.
PARAGON [Picksley Sims] :
A product of Picksley, Sims & Co. of Manchester, this was a late 19th century chain-driven roller mower available in 8, 10, 12, 14, 16 & 18 inch cutting widths.
A product of Ransomes, this was a mower made for the French market in the 1880s and sold through Decker & Mott of Paris. In 1887 it was offered on the UK market as the "New Paris", which in 1892 became the "Anglo-Paris".
An American powered sidewheel mower made by the Eclipse Lawn Mower Co. This was a 21 inch mower with a 1.25hp. Briggs & Stratton engine which, in September 1949, was being offered for sale at $149.50. A development of the company's "Rocket".
A late 19th century (c1896) mower made by the Pastime Lawn Mower Co. of Detroit, Michigan, USA. This was a sidewheel machine with the driving wheels set well back and the frame of the mower tapering to allow the wheel tracks to line up with the ends of the cutting cylinder; thus allowing cutting and trimming "close to fence or tree". The blades on the cutting cylinder were divided into two sets, ie not continuous.
PATENT STAR :
See "Star" [John Hopwood].
An American sidewheel mower, c1906, made by the Reading Hardware Co. of Reading, Pa. See also "Red Peerless". Several American manufacturers seem to have used this name, including Montgomery Ward Co.
A product of Lloyds c1938, this was a powered roller mower especially made for fine turf areas. A single T-handle was fitted. The engine drove the cutting cylinder only. Production continued post-1945 and the mower was, in the 1950s, refined to become the "Super Pegasus" which had a 1hp. 4-stroke Villiers engine and a fibreglass grass box.
A 14 inch hand roller mower manufactured by Shanks with 6-bladed cutting cylinder, available from the late 1940s (possibly introduced 1949). Design appears to be similar to the "Lynx" and may be a domestic version. Advertisements claimed the "Pelican" was "light to handle, easy-running, this high-class roller-type mower gives lawns flawless perfection through its clean, smooth cutting action".
This name mainly refers to a range of American sidewheel mowers with intermediate gear drive which was to be imported into the UK in vast numbers from the late 1870s to the 1950s making it the mower with the longest recorded production run. The original manufacturers were the Supplee Hardware Co. of Philadelphia, and the British agents from 1878 were Lloyd Lawrence & Co. which later became Lloyds of Letchworth. In 1924 these agents started manufacturing "Pennsylvania" mowers in this country. These mowers can be identified by the letters "PQ" (Pennysylvania Quality) cast into the frames. Roller mowers and pony mowers were also made under the "Pennsylvania" name, as was a 1949 bank trimmer, an 8 inch machine with a front roller, driven by a mains electric motor. The Pennsylvania "Trio" was a triple pony drawn gang mower offered by Lloyds in 1923.
PENNSYLVANIA MOTOR MOWER :
See "Moto Mower".
PERFECTION [Abner] :
A German mower made by Abner, c1908. This was a sidewheel machine available in 10, 12, 14, 16, 18 & 20 inch cut. Also marketed under its German name of "Perfektion".
PERFECTION [Greens] :
Horse-drawn mower, available with single or double shafts or poles, for use on fairways and similar surfaces. Design has large side wheels driving mechanism to lift and lower rear-mounted cutter with seat above. Advertised as available in 1940 but design appears older.
An early 20th century gear-driven roller mower made by the Philadelphia Lawn Mower Co. Available in 10, 12, 14, 16, 18 & 20 inch sizes, prices in 1910 ranged from £3.4.0d to £6.19.0d.
A range of low-noise rotary mowers marketed by Solo in the 1980s - larger version of the "Piccolo".
A lightweight rotary mower marketed by Solo in the 1980s.
American lawn-edger made by the Blair Manufacturing Co. (pre-1940 ?).
A mains electric mower by Shanks, c1950, this was a 12 inch mower designed for medium size lawns. The one-quarter hp. Hoover motor drove the cutters only.
A late 1930s manual sidewheel catalogue mower made in 10 & 12 inch sizes. Contained in the Thomas Plant Catalogue.
A series of 1920S/30s sidewheel mowers (probably of American manufacture) retailed by J.C. Plimpton of Liverpool. These were shown in the Harrod's catalogues of the time.
A model of Ironcrete, this was a 12 inch powered roller mower with a BSA engine made in the 1950s. It is assumed that other cutting widths also had the "Plus" prefix.
A model of Ironcrete, this was a 14 inch powered roller mower with a BSA engine made in the 1950s. It is assumed that other cutting widths also had the "Plus" prefix.
A product of Suffolk, this was a rotary mower from the 1950s, replaced by the "Centaur".
PONY [Ransomes] :
This, not surprisingly, was a pony mower made by Ransomes, Sims & Jefferies in the late 19th century. Available in 26 and 36 inch sizes it sold for £14.0.0d & £18.0.0d respectively in 1890. Leather pony boots were offered at 25/-d and horse boots at 30/-d. This was still being offered in the firm's 1915 catalogue described as the "Patent Pony" mower.
PONY [Suffolk] :
A product of Suffolk introduced in 1957, this powered roller mower was replaced by the "Colt" in 1960.
A product of Suffolk, this was a conventional wooden-handled sidewheel mower (c1940s?).
POPULAR TWO :
A product of Greens, this was manual roller mower with 12 inch cut, retailing at £3.7.6d in 1939.
POWER LAWNMASTER :
A detachable electric conversion unit (c1950) marketed by Kaysale Ltd. of Clements Lane, London.
POWERED PANTHER :
A product of British Anzani, this was a powered roller mower with 24 inch cut, which was selling for £75 in 1963. By 1965 Mk.3 machine had power take-off for Heli-Strand flexible drive tools.
PREMIER [Dennis] :
A product of Dennis Bros. of Guildford, the "Premier" was a development of the popular "Z" series but utilising a more powerful 10 hp. Blackburn engine and a "chevron" cutting cylinder; c1965.
PREMIER [Hoods] :
An imported American sidewheel mower sold by Hoods of Birmingham from 1885 to 1925. This was available in 8, 10, 12, & 14 inch sizes at prices in 1900 ranging from 22/-d to 26/-d.
PREMIER [Smith & Ellis] :
A British-built sidewheel mower retailed by Smith & Ellis c1929. Four sizes were offered, from 8 to 14 inch at prices ranging from 21/-d to 27/-d (grassbox 6/9d).
A late 19th century American gear-driven roller mower made by Hills, the "President" had "Archimedean"-type blades whilst the "New President" from the same stable had 3-bladed "propeller"-type cutters as opposed to the more conventional cutting cylinder. In 1891 these machines were available in 10, 12, 14 & 16 inch cutting sizes with prices ranging from £2.5.0d to £5.10.0d. The Dublin agents were Thomas M'Kenzie & Sons of Gt. Brunswick Street.
The trade name adopted by Arundel Coulthard & Co. Ltd. The roller mowers produced under this name were called "Rollmo". A range of sidewheel mowers was also produced in the 1930s, which included the basic "Presto", the "Presto De Luxe" and the "Presto-Grasmo". Colour scheme for the basic "Presto" sidewheel mower was light green, with red handle bows and gold lettering. After the take-over by Qualcast, the Presto "Rollmo" was being offered in catalogues such as Ross & Alexander under the "Panther" name.
PRESTO LORNMO :
A sidewheel ball-bearing machine with 12 inch cut, manufactured by Arundel Coulthard & Co of Preston. The design incorporated 8 inch diameter wheels with "wide tread sure grip" and rubber tyres.
PRESTO ROLLMO MOTOR MOWER :
A 14 inch motor mower manufactured by Arundel Coulthard & Co of Preston. The design incorporated 98cc Villiers Midget two-stroke engine, six-bladed cutting cylinder and cork plate clutch, and an oval cross-section petrol tank mounted above the engine. The overall appearance superficially similar to the "Qualcast Motor Mower".
A product of Greens, a manual all-steel roller mower introduced in 1929 and developed from the "Silens Messor". It was a similar machine to the "S.M. De Luxe" and was available in 10, 12 & 14 inch sizes. In 1935 prices ranged from £6.0.0d to £7.10.0d. By this date the grass box was not ribbed, as in earlier machines.
A product of Flymo, this was a mains electric 15 inch rotary mower (not a hover) with a grass box and roller drive, c1975.
An American 7-blade 16 inch sidewheel mower made by the Eclipse Lawn Mower Co. in the late-1940s. In September 1949 this mower was priced at $26.95.
A product of Suffolk in the late 1950s, this was a conventional powered roller mower for fine turf areas with a 10-blade cutting cylinder. By 1963 the 17 inch model was retailing at £45.19.6d.
An American sidewheel mower made in 1925 by the Eclipse Lawn Mower Company.
A product of Suffolk introduced in 1953 and one of the most popular post-war powered roller mowers. Powered by a 50cc Suffolk two-stroke engine the original "Punch" with its horse's head logo, had dual drive added by 1956, in which year the "Super Punch" and "Super Punch Professional" were also introduced to the range. Four models of the "Punch" were in production by 1969, and the "Super Punch" was still in production in 1975.
A catalogue mower made by Coldwell. Some models also bear the word "Leeds".
A motorised version of the Qualcast "Panther" c1955.
A manual sidewheel mower by Qualcast which replaced the Q7 in 1980, this had a rear-mounted grass collector instead of the traditional front-mounted grass box.
A manual sidewheel mower by Qualcast which replaced the B1 in 1973.
QUAKER CITY :
A late 19th century American sidewheel mower made by the Supplee Hardware Co. of Philadelphia and imported by Lloyd Lawrence & Co. Offered concurrently with the "Pennsylvania" in the 1890s.
QUALCAST MOTOR MOWER :
The Qualcast Motor Mower was introduced in the mid 1930s, possibly as early as 1935, manufactured by Qualcast. The design featured a 16 inch cut, 98cc Villiers Midget two-stroke engine, cast iron side frames, and handle-start. The cork plate clutch - at one end of the rear roller - was activated by a lever on the handles pulling a cable. Early designs had a single large sprocket on the end of the roller which meant that the cutter rotated whenever the engine was running: later models had two adjacent sprockets so that the cutter only turned when the clutch was engaged. Early designs also had the petrol tank mounted on the mid-spar of the handles whereas later (usually post World War 2) models had the tank mounted above the engine. Another difference on earlier models was the use of a single, central adjuster on the thrower plate - to enable the blade to adjust to the reel - whereas later models had two adjusters, one at either end. Although officially called the Qualcast Motor Mower by the manufacturer contemporary to production, the model is often referred to as the "Qualcast Sixteen" by collectors and enthusiasts. The design of the mower is superficially similar to the "Presto-Rollmo Motor Mower" and other slightly later machines.
QUALCAST SIXTEEN :
See "Qualcast Motor Mower".
A product of the Granite State Mowing Machine Co. of Hinsdale, New Hampshire, USA, this was a sidewheel mower c1906.
QUEEN CITY :
A product of the Australian firm Scott Bonnar of Adelaide, the "Queen City" was normally powered by an electric motor but batches were made during World War 2 with a Buzacott hopper-cooled petrol engine similar to the British Lister "D", presumably because of wartime shortages.
A product of Lawn-Boy, this was marketed with emphasis on its low noise capability. It was a rotary mower with an 87cc 2-stroke engine which was totally enclosed in a fibreglass cover. In 1963 the 19 inch model sold for £41.10.0d.
A product of Ransomes, Sims & Jefferies, the "R" series were a range of large mowers, mainly with Sturmey Archer engines, introduced in the late 1930s and continued post-1945. Made for the professional market they were the Ransomes equivalent of the Dennis "Z" type.
An American sidewheel mower made by the Lawson Mfg. Co. of Milwaukee, Wisconsin, USA, c1888. This, like the "Richmond Star", was an asymmetrical mower driving through the right-hand wheel only, the theory being that the "idle" left-hand wheel allowed a closer cut to the lawn edges The handle was offset to the right, presumably to stop the mower going round in circles.
A product of Shanks in the 1920s, this was a 24 inch mower with a four-stroke J.A.P. engine. This name was also used by Coldwell.
A range of gang mowers by Greens, c1965.
RAPID TRANSIT :
A late 19th century American sidewheel mower made by the Supplee Hardware Co. of Philadelphia.
A four-wheel rotary mower marketed by Farmfitters Ltd. of Gerards Cross in the 1950s/60s. In 1962 the "Rapier" retailed for £11.0.0d. Originally a Vincent engine was fitted but later models had Clinton Panther and Briggs & Stratton engines. One Vincent-engined example bears the serial number 106109. It is understood that Farmfitters made the carcass of the machine.
RAZOR BLADE :
A late 19th century sidewheel mower made by the American F & N Lawn Mower Co. Available in sizes from 10 to 18 inches.
American ball-bearing sidewheel mower made by the Reading Hardware Co.
RED PEERLESS :
An early 20th century American 3-blade sidewheel mower marketed by Butler Bros. Chicago, USA, c.1910. Probably a product of the Reading Hardware Co. (see also "Peerless").
The "Reliable" was a roller mower made by Ratcliffe of New Holland in Essex. An example with 14" cut is known. The design is similar - but not identical - to the "Silens Messor". Augmentations to the Silens Messor design include ball bearings on the cutter and roller, rather than brass bushes, roller chain and metallic front rollers.
A sidewheel mower marketed by the Brussels agent John H Graham c1920. An American import.
A product of Ransomes, Sims & Head and later Ransomes, Sims & Jefferies, this was gear-driven roller mower first made in the 1870s. The machine was similar to others of the period but had a "T"-handle. The name derived from the ability to reverse the cutting cylinder when the blades were worn on one side. This was a small machine designed for small gardens and borders, available in 6 and 8 inch cutting widths.
A late 19th century sidewheel mower made by W.E. Lape of Syracuse, New York. A smaller version was marketed as the "Rex Junior" and advertised as "the legitimate offspring of the "Rex". The "Rex" was available in 13, 15, 17, 19, 21, 23 & 25 inch sizes, and the "Rex Junior" in 12, 14 & 16 inches; the main difference between the two mowers being the diameter of the drive wheels.
REX JUNIOR :
A product of Scott Bonnar (Australia) c.1936, this was a sidewheel mower made until the 1950s. The price in the 1936 McPhersons catalogue was £6 (Australian) for the 16 inch version.
RICHMOND STAR :
An American asymmetrical sidewheel mower made by Dille & McGuire of Richmond, Indiana, USA. Patented in 1885, this had one driving wheel on the left and a narrow "idle" wheel on the right. The "T"-handle was offset to the left, unlike the later "Racine" which had the handle offset to the right. In 1888 this mower was available in 10, 12, 14 & 16 inch widths, with prices ranging from 60/-d to 80/-d.
A product of British Anzani, this was a 24 inch 4-stroke roller mower with a seat mounted on a quickly-detachable tubular framing. Details of the machine are contained in the firm's 1965 catalogue, and it was probably intended to be an eventual replacement for the "Lawnrider".
A product of Mountfield, this was a 1970s ride-on mower available in a variety of models differing in engine size, cutting width etc.
An American powered sidewheel mower, c.1950, made by the Eclipse Lawn Mower Co. This was a 30 inch mower with a 2hp. Briggs & Stratton engine which was offered as a larger version of the "Rolloway".
RIO GRANDE :
A product of The Eclipse Lawn Mower Co., (early 20th century onwards) this sidewheel mower with the Adams self-sharpening device was similar to, and marketed alongside, the "Lady" and the "Mid West".
A product of Ransomes, Sims & Jefferies, this was a manual sidewheel mower introduced in 1947 and made especially for longer grass. The Mark 1 was replaced by the Mark 2 in 1963 and the "Ripper" remained in production until 1974. With a stout tubular steel handle and rubber wheels as an optional extra, this proved to be a popular mower in small orchards etc until the introduction of the power driven rotaries. Most "Rippers" seem to have been sold without grass boxes or deflector plates.
An American sidewheel mower, c1891, a product of Chadborn & Coldwell.
A powered sidewheel mower made by The Eclipse Lawn Mower Co. of Prophetstown, Illinois, introduced in 1937 and utilising many of their manual mower components, this was advertised as being the first powered mower made for the small garden (a somewhat dubious claim). By September 1949 three versions of the "Rocket" were being offered (I) rope start at $114.50 (2) recoil start at $119.50 and (3) "Hi-Cut" at $124.50.
A late 19th century gear-driven roller mower made by Follows & Bate, available in 8, 10, 12, 14, 16, 18 & 20 inch widths.
A product of Arundel, Coulthard & Co. introduced in the mid-1930s and remaining in production for some years, these were a range of roller mowers, both manual and powered. The powered version had a 98cc Villiers engine and sold for £17.10.0d in 1937, whilst the manual 12 inch "6-24" sold for 75/-d in the same year. By 1939 four manual mowers were on offer (the 5-15, 6-18, 6-24 and 8-32) in addition to the powered mower. In these manual machines, the first number indicated the number of blades on the cutting cylinder and the second the number of cutting cylinder revolutions per foot of travel. After the post-war take-over of the firm by Qualcast the "Rollmo" was advertised in catalogues such as Ross & Alexander under the "Panther" name.
An American powered sidewheel mower made by the Eclipse Lawnmower Co., this was a 25 inch mower with a 2hp. Briggs & Stratton engine which, in September 1949, sold for $249.50.
ROTA MINI :
A product of Qualcast introduced in 1970, this was the first mains electric rotary mower by that company.
ROTA MO :
A product of Qualcast, this was a 14 inch mains electric rotary mower. Originally with a front-mounted grass box, the "Rota Mo 360" was redesigned with a rear grass box in 1974 and re-named "Jetstream".
A product of Qualcast, this was a 12 inch rotary mower from the 1980s with a child-proof safety switch and plastic blades.
A product of Qualcast, this was a range of rotary mowers introduced in 1957 and continued into the 1960s with a wide range of engines and cutting widths eg the Mk. IV was identical in all respects to the Suffolk "Centaur".
ROTARY SICKLE :
A rotary mower made by John Allen from the mid-1950s, this was an attractively streamlined machine with two large pneumatic rear wheels and two smaller front wheels. Early versions were manually propelled but the later ones were self-propelled. A four-bladed version was introduced in 1960.
A product of Barfords of Belton, this was an 18 inch rotary mower with a 98cc two-stroke engine, c1963.
A range of Italian designed rotary mowers marketed in the UK in the 1960s, these were available with either petrol engines or mains electric motors. Both models had trailing grass boxes.
A product of Power Specialities Ltd. of Maidenhead (later Slough), the "Rotoscythe" was the world's first rotary lawnmower, being introduced in 1933 from a design by David Cockburn. Cutting was by a rotary impeller with cutting discs, and the cut grass was driven into the rear-mounted grass box. Pre-war "Rotoscythes" were available with 14, 16, and 20 inch cut, as well a special long grass pram-wheeled 18 inch version. Post-war the company produced the "Rotoscythe 16", as a more streamlined version of its pre-war machine. This had Power Specialities' own 120cc engine and sold for £38.15.0d (plus P.T.) in 1949. After 1952 when Power Specialities Ltd. had been acquired by J.E. Shay, the "Rotoscythe 16" and its variants, the "Windsor" and the "Eton", continued in production and the basic design was continued by Wolseley-Webb into the 1970s.
Originally a sidewheel mower by Greens intended for long rough grass, bents, etc. Available in 16 inch width only the price in 1935 was £5.10.0d (grass box and delivery plate extra) . By the mid-1950s however Greens were making a "Motor Roughcut" which they advertised as a "go anywhere" machine. This had wheels instead of rear rollers and rotatable front wheels on the "supermarket trolley" principle.
ROWLETT'S CHAMPION :
See Champion Mfg. Co.
ROYAL BENGAL :
See "Royal" [USA].
ROYAL BLADE :
A product of Qualcast, this was a 14 inch. petrol engined roller mower introduced in 1954 and continued into the mid-1960s as the "Royal Blade De Luxe". A distinguishing feature of this model was the shaped petrol tank which was curved to fit around the crankshaft.
ROYAL [Greens] :
A product of Greens, c1877, this was a sidewheel mower with an iron "T"-handle, available in 6, 8, 10, 12 & 14 inch widths.
ROYAL [Marples] :
A sidewheel mower offered by Marples of Sheffield c1903. Possibly a catalogue mower, or an American import.
ROYAL [Townsend] :
An early-20th century sidewheel mower made by the American firm of Townsend, also manufactured under licence by the Thomas Mfg. Co. of St. Louis, USA.
ROYAL [USA] :
Late 19th/early 20th century sidewheel mowers imported into India from America. The Calcutta agents, W. Leslie & Co., also advertised a "Royal Bengal" mower from the same manufacturer. Available in 10, 14, 16, 18, & 20 inch sizes, Indian prices in 1902 ranged from 22.8 to 45 rupees.
A product of ATCO, this was a powered roller mower with a ride-on seat introduced in 1995.
A product of Follows & Bate, this was a manual sidewheel machine introduced in 1893 and which set the pattern for most sidewheel mowers for the next 50 years or so. Available in 9, 11, 13, 15, 17, 19, & 21 inch cut, this machine sold at prices ranging in 1897 from 38/6d to 120/-d. The rubber-tyred version was slightly more expensive, and grass boxes and deflector plates were optional extras.
RUNLIGHT EAGLE :
An American catalogue mower retailed by Geo. Whalley & Co., Eagle Works, Keighley, c1900. This sidewheel mower was available in 8, 10, 12, 14, 16 & 18 inch sizes at prices from 18/-d in 1903.
S.M. DE LUXE :
A 1930s development of Green's "Silens Messor", this is distinguishable from the parent machine by the more rectangular scraper plate and streamlined chain cover. Prices in 1935 ranged from £11.15.0d to £15.0.0d and included the grass box and transporting carriage (with 'pram-type wheels) . Cutting widths varied between 12 & 18 inches and a range of cutting cylinders (6, 8 or 10 blade) were available.
S.M. JUNIOR :
A product of Greens, this was a manual roller mower with a 12 inch cut retailing for £4.14.6d in 1939. The price included the grass box and a grease gun. Although a gear-driven mower, the straight rather angular handles revealed its "Silens Messor" origins.
A product of Westwood, this was a 1970s rotary mower with a 19 inch cut and a trailing polythene grass catcher.
A "Lawn-Boy" rotary mower made by NJB Mowers Ltd. of Downham Market, Norfolk, in the 1980s.
A range of rotary mowers made by Pressure Jet Markers of London in the 1960s. The smallest of these had an 8 inch cutting head whilst the largest, the "Scimitar Major" had an 18 inch cut.
SCIMITAR MAJOR :
An early 20th century product of Shanks, this was a manual sidewheel machine typical of the period and a cheaper version of the "Britisher". By 1939 it was being offered in 10, 12, & 14 inch sizes at prices ranging from
SELFRIDGE SUPER :
A sidewheel mower made for the London stores of that name by Suffolk Iron Foundry c.1938. This was a conventional T-handled machine with a blue and red colour scheme.
A product of Hayter, the "Senator" was a powered mower for the professional market. This high quality machine with its 8 hp. Kohler engine replaced the "Condor" in 1980.
A product of Samuelson, c1880, this was a roller mower not unlike the "Silens Messor" to which a star-shaped edger could be fitted. Available in 10, 12, 14, 16, 19 & 22 inch cutting widths, the "Senior" sold from
A Panther-engined three-wheeled grass cutter and trimmer designed to fit the requirements of the City of London cemeteries. Marketed by Farmfitters Ltd. in the 1960s. In 1962 the "Sexton" retailed for
An American "Archimedean"-style sidewheel mower imported into Ireland through John Parkes of Dublin, c1883. Available in 12, 14, 16 & 18 inch cutting widths, prices ranged from
SHINGLER (Suffolk) :
An edge cutter made by Suffolk Iron Foundries.
A 24 inch powered sidewheel mower by ATCO with a 120cc 4-stroke engine. In 1963 this sold for this sold for £62.0.0d, making it more expensive than the contemporary “Antelope”.
SILENS MESSOR :
(Silent Cutter). A product of Greens from 1859 to the mid-1930s. This mower was produced at a time when gear drives were excessively noisy and the 'Silens Messor', being a chain-driven machine, had a distinct advantage in this respect. This was a manual roller mower which underwent several changes in design during its long production span. Manual machines were available in 6, 8, 10, 12, 14, 16, 18, 20 and 24 inch sizes, all but the very smallest machines having provision for a draw rope. Early models had curved handles, and later ones straight handles. Other more detailed features can provide a more accurate dating. The "Silens Messor High Wheel" was a mower for golf courses, whilst pony mower variants came in 30 inch sizes and above. These latter machines (available well into the 1920s) were scaled-up versions of the manual mowers but had dog clutches on the rear rollers and a chain and sprocket mechanism for raising and tipping the grass box.
SILVER COMET :
A product of Shanks, this was a chain-driven roller mower, c1950s, with a tubular steel "pram" handle.
A re-naming of their "Sunbeam", this was a 14"/16" powered mower by J.P. in production from 1964 to 1970, and from 1970 to 1971 as the "Simplees B".
A motor conversion unit produced by Small Engines Ltd. of Birmingham.
A 1930s product of Shanks, this was a long grass sidewheel mower with an 'A'-frame handle and 15 inch cut. In 1939 it was priced at
A manual sidewheel machine marketed by J. Smith & Co. of Bristol in the early 1930s, this was a catalogue mower made by Suffolk. It came in 8, 10, 12 & 14 inch sizes and retailed at 18/6d, 20/6d, 22/6d and 25/6d respectively. The grass box was an extra.
A manual sidewheel mower with 7 inch diameter wheels. A product of Dronsfield Brothers Ltd. of Oldham, the "Snipe" was available with 10 and 12 inch cut, selling in 1938 at 29/6d and 30/6d respectively.
An American manual sidewheel machine (early 20th century) made by Stearns. Many were supplied via Canada to avoid import taxes. See also "Star-Sovereign".
See "Army & Navy".
SPECIAL CALEDONIA :
See Caledonia [Shanks].
SPECIAL PONY :
A range of early 20th century pony mowers by Ransomes, Sims & Jefferies designed for golf "roughs". The conventional front rollers were replaced by a series of discs which it was felt were kinder on the turf. By 1915 these were being offered in 26 and 30 inch sizes at prices ranging from £19.0.0d to £25.10.0d.
SPECIAL ROLLER :
A product of Ransomes, Sims & Jefferies, this was an early 20th century gear-driven manual roller mower designed for fine turf areas. In 1915 this was being offered in 14 and 16 inch sizes at £5.10.0d and £6.5.0d respectively.
A 1950s product of ATCO, this was a fine turf mower with a 10-bladed cutting cylinder and a 150cc engine. By 1963 this 20 inch mower was selling for £85.0.0d.
A New Zealand-built rotary mower with a Villiers engine, c1955.
An American powered sidewheel mower made by the Eclipse Lawn Mower Co., this was a 32 inch mower with a 3.5hp. Briggs & Stratton engine which, In September 1949, sold for $375 making it the most expensive of that company's machines.
A product of Follows & Bate, c1896. This was a manual sidewheel mower with a trailing canvas-sided grass box. It was available in 7, 9, 11, 13, 15 and 17 inch sizes (1897 advertisements) at wholesale prices ranging from 28/-d to 40/-d. The "Speedwell" was still being offered for sale in the 1920s, and as late as 1929 by wholesalers such as the Army & Navy stores. NOTE: Some early references use the hyphenated "Speed-Well" name but others use "Speedwell".
A sidewheel mower marketed by the Brussels importers of John H. Graham (probably an American import) c1920.
The name under which Littlewoods retailed the Follows & Bate "Magic" all-steel sidewheel mower.
A sidewheel mower made by Philadelphia in 1887 in 12, 14, & 16-inch sizes.
A product of Flymo, this was a mains electric rotary mower introduced in 1985 which returned the smaller grass cuttings to the lawn whilst retaining the larger cuttings in the grass box.
A product of Ransomes, Sims & Jefferies, this was a 1950s powered roller mower with 14 inch cut and a 34cc Villiers engine. It was discontinued in 1964. A mains electric version was also available.
A product of Suffolk, this was a four-stroke sidewheel mower introduced in 1957. Production ended c1969.
SQUIRE CORPORATION :
A product of Suffolk, this was introduced as a heavy duty version of the "Squire" in 1957. In 1960 it was re-named the "Corporation" under which name it was phased out in the late 1960s.
STANDARD [Atco] :
A product of ATCO (Charles Pugh Ltd.), this was a series of open-frame powered roller mowers made between 1921 and 1933. These were the first mass-produced motor mower for the smaller garden and were available in sizes from 12 inch (the "HY" variant) to 36 inch. Sizes up to 22 inch had Villiers two-stroke engines, while larger models had JAP four-stroke engines. Very early (1921/22) "Standards" can be identified by their frames which are oval in cross-section compared with the later "H"-section frames. Early machines had the Senspray carburettor rather than the later ATCO-Villiers unit, but as the former were very often changed during the life of a mower this cannot be taken as a hard and fast dating feature. These remain a popular mower with collectors, due in part to the very large number made.
STANDARD [Emerson, Talcott & Co] :
Wide-cut mowers made by Emerson, Talcott & Co., Rockford, Illinois (USA), late 19th century.
STANDARD [F&N] :
A late 19th century sidewheel mower made by the American F & N Lawn Mower Co.
STAR [Curtis] :
See Curtis Cultivator Co.
STAR [John Hopwood] :
An 1870s mower patented by John Hopwood of Great Moor, Stockport, also referred to as the "Patent Star". This was a gear-driven roller machine with prominent star-wheels (options for one or two) providing the drive between the roller and the cutting cylinder. Available in sizes ranging from 12 to 28 inches.
STAR [Landers, Frary & Clark] :
A small sidewheel mower made by the American firm Landers, Frary, & Clark, c1871. The solid drive wheels had a large star cast into them.
STAR [Ransomes] :
An early 20th century product of Ransomes, Sims & Jefferies, this was a sidewheel mower designed for fine turf areas. With a 6-bladed cutting cylinder the "Star" was available in 10, 12, 14 & 16 inch sizes in 1915 with prices ranging from £2.15.0d to £4.12.0d.
An early-20th century Canadian-built sidewheel mower. In 1914 this was being offered by Jas. Shoolbred & Co. (London) in three sizes at prices ranging from 12/6d to 14/6d. This was a 5-blade mower with 8 inch diameter driving wheels. The manufacturer was probably Stearns.
See Stearns, E.C.
A product of Landmaster, this was a 19 inch petrol-engined rotary mower first introduced in the 1960s and continued under the Wolseley Webb name after that firm acquired Landmaster in 1980.
STUDLEY ROYAL :
A pony mower by Parkinson of Ripon, late 19th/early 20th century.
A name used by Greens, c1935, to describe their horse-drawn ride-on gang mower intended for golf courses. The name is derived from the American light two-wheeled carriage which it somewhat resembled. The price in 1935 for the basic mower and one 30 inch unit was £42.10.0d.
SUNBEAM [Foos] :
A late 19th century sidewheel mower made by the G.S. Foos Co. of Springfield, Ohio, USA. Other products from the same stable include the "Columbia", "Favorite", "Florence", and "Standard".
SUNBEAM [JP] :
A 1960s product of J.P., this was a powered roller mower with a two-stroke engine. Introduced in 1963, the name was changed to "Simplees" the following year.
SUPER CERTES :
SUPER CLIPPER [Atco] :
A product of ATCO, this was a 14 and 16 inch sidewheel mower which appeared in that firm's catalogue in 1989. By that time Suffolk and ATCO had amalgamated.
SUPER CLIPPER [Suffolk] :
A product of Suffolk, this was a sidewheel mower made immediately after World War 2. This was replaced by the "Viceroy".
SUPER COLT :
SUPER ELECTRIC :
A product of J.P. 1948 to 1958, this was made in three sizes, 12, 14, & 16-inch., not all of them lasting for the full production cycle.
SUPER JETCUT :
SUPER PANTHER :
SUPER PEGASUS :
SUPER PUNCH :
SUPER PUNCH PROFESSIONAL :
SUPER SEVEN :
A product of Qualcast, this was a 7-blade sidewheel mower advertised in Australia as being "specially for English grasses", c1937.
SUPER SIMPLEX :
A high quality motor roller mower made by J.P. in the 1940s, 50s & 60s to a pre-war design. These had a Villiers 2-stroke engine and are distinguishable by the oval fuel tank mounted on the handlebar cross members. See also "Super" [J.P.].
SUPER SPECIAL :
See "Super" [J.P.].
SUPER SWIFT :
A product of Suffolk, this was a 12 inch manual roller mower made immediately after World War 2.
SUPER [Hayn] :
A 12 inch manual roller mower in the "Hayn" range by Nutt Eng. Co. Ltd. (1950s/60s). A 10 inch version was the "Gem".
SUPER [JP] :
A range of mowers by J.P. designed in the 1920s and continuing in production until 1961.These included 12, 14 & 16 inch manual roller mowers and the "Super Special" high-quality 16 inch manual roller mower. The "Super 16" and the "Super 24" were Villiers-engined motor mowers and the forerunners of the post-war "Super Simplex" range. In the 1950s 17 and 20 inch powered mowers in this range were being offered at £96.10.0d and £120.0.0d respectively.
A 1950s product of Suffolk, this was a 12 inch 5-blade sidewheel machine with tubular handles and rubber-tyred wheels. It was offered as Gift No.1069 by Kensitas cigarettes, for which one required 2400 coupons.
SUPERLITE PANTHER :
A product of Greens in the 1920s/30s, this was manual roller mower developed from the "Silens Messor" and retaining that model's angular handles and ribbed grass box. Available in 10, 12, 14, 16 & 18 inch sizes, the prices in 1935 ranged from £7.10.0d to £13.0.0d.
SWALLOW [Dennis] :
A 27-inch heavy-duty rotary mower made by Dennis.
SWALLOW [Dronsfield] :
A product of D.B. of Oldham, c1936, this was a manual roller mower with a 12 inch cut retailing at 69/6d.
SWAN NECK :
A name sometimes given by collectors to the Anzani "Lawnrider" because of its distinctive shape.
SWIFT [Dennis] :
A 1960s product of Dennis, this was a 20 inch cut rotary machine of which about 1000 are believed to have been made. The bed of the machine was wedge-shaped, the rear wheels having a narrower track than the smaller front ones. First introduced in 1963, the "Swift" was still in production in 1967.
SWIFT [O'Brien Thomas] :
An early 20th century sidewheel mower imported into Britain by O'Brien Thomas & Co. of London and bearing their name - probably an American catalogue mower. This was available in 10, 12, 14, 16 & 18 inch sizes with prices in 1901 ranging from 30/- to 38/-d (grass box extra).
SWIFT [Suffolk] :
A product of Suffolk, this was a 10 inch roller mower made immediately after World War 2. This and the "Super Swift" were still being made when the company joined the Qualcast Group in 1958.
A product of Shanks, the 'Talisman" was basically a copy of the American Pennsylvania sidewheel machine. This was available in 10 to 19 inch sizes with prices in 1910 ranging from £2.15.0d to £6.15.0d. By 1939 it was being offered in 13, 15 & 17 inch sizes at prices ranging from £8.10.0d to £10.10.0d (grass box and delivery plate extra).
A gear-driven roller mower made by Follows & Bate, c1880, with curved handles and grass box. This resembled Ransomes machines of the same period. A chain-driven version was known as the "Chain Tennis". This latter was also supplied to the Army & Navy stores as the "Auxiliary" and the "Victoria".
A 1930s product of Shanks, this was a manual roller mower in the medium price range. By 1939 the "Thistle" was being offered in 12 and 14 inch-sizes at £5.10.0d and £5.0.0d respectively. A cheaper version of the "Eagle".
TOM TIT :
A cheaply made sidewheel mower by Alexander Shanks and Co, Ltd. Believed to date around 1950 and although a few known to exist it does not seem to be listed in a catalogue and was not officially produced.
A small French 1950s all-steel roller mower (manufacturer unknown). One known example in the UK has a 25cm cut 4-bladed cylinder and is orange in colour. The word "Tondix" comes from the French word "tondeuse" (lawnmower).
A streamlined reciprocating-knife mower made in the USA by the Eclipse Lawn Mower Co. With its 2hp. Briggs & Stratton engine the "Tornado 700" sold in September 1949 for $185.
A 1930s American sidewheel mower made by the Eclipse Lawn Mower Co. This was a similar mower to the "Rio Grande".
A product of ATCO, this was a powered sidewheel mower similar to the Ransomes "Antelope".
TOURNAMENT TRIPLEX :
A 1970s product of the American firm Hahn and also by Ransomes who modified and subsequently produced it themselves. The mower was renamed the "Triplex 171" in 1980. Transmission to the rear wheels was hydrostatic giving a wide range of forward and reverse speeds. The machine was used mainly on golf courses.
See "Pennsylvania Trio".
A Ransomes triple-pony drawn gang mower with an 84 inch cut, offered for sale in 1923.
TRIPLE LYNX :
Introduced in 1949, this gang mower by Shanks consisted of three "Lynx" mowers pulled by a tractor unit with large-section pneumatic tyres. Each of the mower units had its own grass box. Total cutting width was 42 inches.
TRIPLEX 171 :
See "Tournament Triplex".
A product of Shanks, 1920s/30s, the "Triumph" was a horse drawn mower for golf courses similar to the Ransomes "Ideal" and employing a similar method of raising and lowering the height of the cutting unit. By 1939 the 36 inch "Triumph" was being offered at £65.0.0d. Normally it was sold with horse shafts, but a tractor drawbar or a whippletree (aka “whiffletree”) for oxen was also available.
An early 20th-century sidewheel mower of conventional design. Could be a catalogue mower or a US import ?
TURBO COMPACT :
A product of Flymo, this was a streamlined mains electric rotary mower introduced in 1994.
A sidewheel mower from Greens (1940s/50s).
TWO SPEED :
A 12 inch hand roller mower manufactured by Webb in the 1950s. The design featured low and high gears, selected using a simple lever on the chassis, that enabled two different cuts-per-inch at the same walking pace.
Initials found on a range of gardening items, including the "Gordon" mower, retailed by Timothy White Taylors, the British pharmaceutical and hardware company.
A product of Greens, the "Tyke" was advertised in 1939 as the lowest priced ball-bearing mower. It was a manual sidewheel machine available in 10, 12 and 14 inch cutting widths and retailed at £2.1.3d upwards, the grass box being extra.
A product of Ransomes, this was a 18 inch rotary mower introduced in 1961 as a replacement for the "Cyclone". Available with either a 2-stroke or 4-stroke engine, the "Typhoon" was replaced by the 4-stroke "Typhoon Major" in 1962. This latter machine remained in production until 1969.
TYPHOON MAJOR :
A late 1930s product of Greens similar the "Utility".
UNIVERSAL [Bentall] :
A mower made by the Essex (Heybridge) firm of E.H. Bentall c1889. This was a sidewheel machine utilising the American principle of four front wheels or driving rolls in front of the cutting cylinder. Advertised in 10, 12, 14, 16, 18, & 20 inch sizes, prices in 1889 ranged from £3.5.0d to £8.0.0d. The two largest sizes were intended for two-man operation.
UNIVERSAL [Blair] :
A late 19th century American sidewheel mower made by the Blair Mfg. Co. Available in 10, 12, 14 & 16 inch sizes.
UNIVERSAL [Universal] :
See Universal Lawn Mower Co.
A product of Greens, this was a low-cost sidewheel mower available in 10, 12 & 14 inch widths with prices in 1935 ranging from 1.11.6d to £1.17.6d. Optional extras included grass box and delivery plates and an extra long 'T' handle.
VALOR [Ironcrete] :
A range of mowers made by the agricultural equipment firm Ironcrete. By 1968 a BSA-powered "Valor" cylinder mower with a 65cc engine was available in 12 and 14 inch sizes (advertised as "Plus-12" and "Plus-14") at prices of £29.7.6d and £36.19.0d respectively. Perhaps a reader can say if this mower was anything to do with the French company.
A product of DAP of Dudley, the "Vantage" was a lightweight manual wheeled machine which, because of its alloy construction appears to date from the post-1945 period. The inside-frame wheels, instead of the more conventional roller, give it a substantially American appearance.
A late 19th century sidewheel mower (probably an American import) sold by Buchanan & Wilson of Old Wynd, Glasgow. Available in 10, 12, 14, & 16 inch sizes.
British made roller and sidewheel machines made in the 1940s. The sidewheel mower was a high-wheel version of the Follows & Bate "Magic". Circa 1950 the London retailers Ross & Alexander were advertising the sidewheel "Velocity" in two versions, 10 inch and 12 inch, at 24/-d and 25/6d respectively (grass box and delivery plate extra).
VERGE CUTTER :
A post-1945 powered sidewheel mower by Lloyds similar to the pre-war "Moto-Mower", available in 21 and 27 inch widths.
A three-wheeled mains electric verge cutting machine made by Tarpen Engineering in the mid-1950s. A reciprocating knife machine, the "Vergemaster" was a more sophisticated version of the "Grassmaster" which was designed for rough grass and weeds.
A product of Suffolk, this was a manual sidewheel mower which replaced the "Super Clipper".
VICTOR [Crowley] :
A product of John Crowley & Co. of Sheffield, this was a late 19th century sidewheel machine patented by Samuel Edwards. Available in 8, 9, 10, 12, 14, 16, & 18 inch sizes, the "Victor" could be supplied with either a "T"-handle or twin handles. The grass box could be positioned either at the front or at the rear of the cutting cylinder.
VICTOR [Pierce] :
A product of Pierce of Wexford (Eire), this was introduced in 1930 as a fine-turf version of the "Hector" sidewheel mower.
VICTORIA [Europe] :
A sidewheel mower marketed in western Europe c1920 in 10,12,14, & 16-inch sizes. It is not known whether this was the same as the mower mentioned elsewhere.
VICTORIA [Follows & Bate] :
A product of Follows & Bate, the "Victoria" was a 10 inch. manual roller mower c1885 made specifically for the Army & Navy stores in Victoria Street, London, and identical to the "Chain Tennis" machine. In 1889 this was available in 9, 11, 13 & 15 inch sizes at prices ranging from 28/-d to 46/-d. By the 1920s this was selling as the "Army & Navy". By 1907 the Army & Navy Stores were offering a range of "Victoria" roller mowers, including pony and horse machines, at sizes ranging from 8 inch to 48 inch widths and at prices from 40I-d to £26.10.0d as well as a “Victoria” sidewheel mower offered in 8,10,12, & 14 inch sizes at prices from 19/-d to 60/-d (this included a lightweight version).
VICTORIA [Follows & Bate] :
The new "Victoria" lawn mower was a sidewheel design manufactured by Follows and Bate of Manchester. In 1889 it was listed as being available in 9 inch (priced 28s including grass box), 11 inch (32s 6d), 13 inch (38s) and 15 inch (46s) models.
VICTORIA [Hartley & Sugden] :
A late 19th century chain-driven roller mower made by Hartley & Sugden. Available in 10, 12, 14, 16 & 18, 20 and 22 inch sizes, prices in 1876 ranged from £3.10.0d to £9.0.0d.
An early 20th century sidewheel mower by Townsend, USA.
VILLA [Parkinson] :
A product of Parkinson of Ripon 1875-85, this was a small roller mower with front guide wheels and a metal "T" handle.
VILLA [Samuelson] :
A product of Samuelson, this was a manual sidewheel machine similar to the "Favorite" c1880. In 1888 this was available in 9, 12 & 15 inch sizes at prices from £2.2.0d to £3.10.0d.
A late-1940s American sidewheel mower made by the Eclipse Lawn Mower Co. In September 1949 this was available in 16 & 18 inch sizes at a price of $21.95 and $23.50 respectively.
See Fagan, W.H.
A sidewheel mower, c1890, marketed by Matterson, Huxley & Watson of Coventry. This was available in 10, 12, 14, 16, & 18 inch sizes with prices ranging from 25/-d to 36/-d.
A product of Webb , the "Wasp" was introduced shortly after the "De Luxe" in 1929. This manual roller mower sold at £2.15.9d in 1939 and continued in production until 1988.
A gear-driven sidewheel mower sold by A. Ballach & Sons of Leith, c1910. This was available in 12, 14, 16, 18 & 20 inch sizes with prices ranging from £4.15.0d to £8.10.0d. The “T”-handle was marked “Ballach's Waverley”.
A late 19th century American sidewheel mower made by F.S. Anderson of Richmond, Indiana.
A sidewheel mower marketed in western Europe c1920, probably an American import.
A late 19th century American sidewheel mower made by the Supplee Hardware Co. of Philadelphia, Pennsylvania (later the Pennsylvania Lawn Mower Co.).
A product of Webb, the "Whippet" manual roller mower sold at £2.13.6d in 1939 and continued in production until the 1970s. This was a 10 inch machine regarded as a lightweight machine for ladies.
A product of British Anzani c1965, this was a 14 inch battery powered roller mower with a built-in battery charger.
An American sidewheel mower, c1893, this was advertised as a "spiral gear noiseless" machine. The manufacturers could have been Wilson, Whiteley & Co. of Springfield, Ohio.
An early 20th century sidewheel mower made by the Philadelphia Lawn Mower Co., this was available in 10, 12, 14, & 16 inch sizes with prices in 1910 ranging from £1.3.0d to £1.13.6d - grass box extra.
WILLING WORKER :
A name given by Drummond Bros. of Guildford to a wide range of machinery of their manufacture, including lathes. These included both powered and manual roller mowers in the late 1920s and 1930s. The manual mowers were available in 10 & 12 inch sizes, and colour schemes varied between early and late machines. A lightweight manual machine was known as "The Ladies" mower. One manual mower from the 1930s bears the serial no. 12907.
A manual sidewheel mower from Hilltop Foundries of Birmingham, early 1930s. This machine had a large rear roller.
WINDSOR [Hartley & Sugden] :
A late 19th century gear-driven mower made by Hartley & Sugden of Halifax and available in 10, 12, 14, 16, 18, 20 & 22 inch sizes. In 1876 prices ranged from £3.10.0d to £9.0.0d. The company also made a pony mower under this name.
WINDSOR [Power Specialities] :
A 15 inch rotary mower by Power Specialities Ltd. introduced in 1937. Not to be confused with the 16 inch machine of the same name manufactured post-war by Shay Ltd. although the two machines are "related".
WINDSOR [Shay] :
A product of Shay Ltd. (Rotoscythe), the "Windsor" was a 16 inch model which retailed at £56.12.6d in 1955. Developed from the Power Specialities Ltd. "Rotoscythe 16". See also "Eton".
WINDSOR [Webb] :
A product of Webb, the "Windsor" manual roller mower sold from £6 upwards in 1939.
WINDSOR [Wolseley-Webb] :
An 18 inch rotary mower by Webb developed from the Shay product when Wolseley-Webb took over that company in the 1960s. This was a self-propelled machine with a ribbed rear roller, powered by a 3_hp. Aspera engine. In 1968 this mower retailed at £72.9.0d. Production had ceased by 1973.
A sidewheel mower by Suffolk made in the 1920s.
A product of Webb, the "Witch" manual roller mower sold at £3.19.9d in 1939 and remained in production until the 1980s. With its fine turf capability and eight-bladed cylinder the “Witch” was advertised in 1969 as “the Queen of hand mowers”.
A product of Webb. In 1939 the "Witton" was the lowest priced of Webb's range of manual roller mowers, selling for £2.2.0d.
WIZARD [Shanks] :
A product of Shanks in the 1920s/30s, this was a 16 inch powered roller mower with a 1hp. 2-stroke Villiers engine and a seven-bladed cutting cylinder. The price in 1927 was £45.0.0d.
WIZARD [Webb] :
A product of Webb, this name was given to a series of powered roller mowers originally referred to as the "AB" series which was introduced in the early 1970s. Made in various cutting widths these employed Briggs & Stratton engines. Mains electric and battery models were also made. The range was discontinued when the company joined Suffolk Lawnmowers in 1984.
A 1930s roller mower made by Wallis Binch of New Basford, Nottingham.
This was a manual roller mower from the 1960s with tubular "X" handles. Marked "A product of Challenge". Possibly a product of F. Slaymaker & Co. of London N.7.
A late 19th century sidewheel mower made by A. R. Woodyatt & Co. of Guelph, Canada, this was a conventional "T"-handled mower made in 10, 12, 14, 16, 18 & 20 inch sizes with prices in 1900 ranging from £1.18.0d to £2.16.0d. In 1890 this firm was taken over by Taylor-Forbes.
A product of Ransomes, Sims & Head c1875, this originally appeared as the "Globe" in 1874. It was a manual roller mower designed for rough grass available in a range of sizes from 8 to 24 inches, with prices ranging from £2.5.0d to £9.10.0d. The “World” was still being offered by Ransomes, Sims & Jefferies in 1915, but looked very dated by that time.
A product of Shanks (1940s/50s). This was a conventional sidewheel mower very similar to the "Drake" with a 12 inch cut and a 5-bladed cutting cylinder. Grass box and delivery plate were optional extras.
WULFRUNA (?) :
An American made sidewheel mower from the 1920s. One example in the UK has a 10 inch cut.
A Greens "Silens Messor" mower marketed by Vipan & Headby of Leicester in the early 20th century and bearing that firm's name cast into the handles, and with their own angular scraper plate. Available in 10, 12 & 14 inch sizes, with prices in 1912 ranging from £4.0.0d to £6.3.6d.
A product of B. Hirst & Sons of Halifax, c1879, this was a gear-driven roller mower made in 6, 8, & 10 inch sizes with prices ranging from £1.5.0d to £2.10.0d.
A high-wheel sidewheel mower made by the Philadelphia Lawn Mower Co., c1900.
A late 19th century American sidewheel mower made by Dille & Anderson of Richmond, Indiana, USA.
A product of Shanks, c1880, this was a roller mower with two front guide wheels, available in 10, 12 & 14 inch sizes at prices of £2.10.0d, £3.10.0d, and £4.10.0d respectively.
Z TYPE :
A product of Dennis Brothers of Guildford, the "Z" type was a heavy single-cylinder 600cc Blackburn-powered roller mower typical of that company's products. It was made both before and after World War 2 and, although not suitable for rough ground, it was ideal for flat surfaces such as cricket pitches where its weight ensured that it rolled the ground as well as mowed it. Because of its power and weight, it was best used with a trailing seat. One example, which left the Guildford works in May 1948, bears the serial no. 299Z7. Replaced by the 10 hp. "Premier" in the 1960s.
ZEPHYR [Eclipse] :
A late-1940s American sidewheel mower made by the Eclipse Lawn Mower Co. In September 1949 this was available in 16 & 18 inch sizes at a price of $24.95 and $26.50 respectively.
ZEPHYR [Greens] :
A product of Greens, this was a late 1940s/50s manual roller mower. In 1949 the "Zephyr" was being offered as a 14 inch machine with a 10-bladed cutting cylinder, but by 1956 a 12 inch 8-bladed version was offered alongside a "Zephyr De Luxe" which was a 12-bladed mower designed for fine turf areas. The price of the standard mower in 1956 was £14.6.7d. Early machines are distinguishable by the chevron ribbing on the roller, later machines having straight ribbing.